mtdids=nand0=sunxi-nand.0
mtdparts=mtdparts=sunxi-nand.0:4m(spl),4m(spl-backup),4m(uboot),4m(env),-(UBI)

fdt_addr_r=0x43000000
kernel_addr_r=0x42000000

bootargs=root=ubi0:rootfs rootfstype=ubifs rw earlyprintk ubi.mtd=4
bootcmd='gpio set PB2; if test -n \${fel_booted} && test -n \${scriptaddr}; then echo '(FEL boot)'; source \${scriptaddr}; fi; mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/$DTB_NAME; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r - \$fdt_addr_r'

fel_booted=0

stdout=serial
stderr=serial
splashpos=m,m

DTB_NAME=sun5i-r8-chip.dtb

bootpaths=initrd noinitrd
bootcmd=run test_fastboot; if test -n \${fel_booted} && test -n \${scriptaddr}; then echo (FEL boot); source \${scriptaddr}; fi; for path in \${bootpaths}; do run boot_\$path; done
boot_initrd=mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/$DTB_NAME; ubifsload 0x44000000 /boot/initrd.uimage; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r 0x44000000 \$fdt_addr_r
boot_noinitrd=mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/$DTB_NAME; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r - \$fdt_addr_r
dip_addr_r=0x43400000
dip_overlay_dir=/lib/firmware/nextthingco/chip/early
dip_overlay_cmd=if test -n \"\${dip_overlay_name}\"; then ubifsload \$dip_addr_r \$dip_overlay_dir/\$dip_overlay_name; fi

video-mode=sunxi:640x480-24@60,monitor=composite-ntsc,overscan_x=40,overscan_y=20