I.  QUICK START INSTALLATION 
     
Before you can print using the IR port, you must install the JetEye driver on 
your portable computer. An install program is provided on the JetEye diskette.  
     
1.  Place the JetEye diskette into the floppy drive on your computer. 
     
2.  Select Run from the File menu in the Windows Program Manager.  
     
3.  Type A:INSTALL in the Command Line box.  
     
4.  Choose OK or press Enter to display the first installation  
    screen.  Follow the on-screen installation instructions. 
     
5.  Select the COM port setting of the infrared port.  The default interrupt
    level (IRQ) and I/O address will display on the screen.  Select the 
    Advanced button if you know the IRQ or port address is different than the 
    default shown.  Press OK to continue with the installation.
     
NOTE:  If you are installing the JetEye driver for COM3 on an HP OmniBook 300,
       425, 430, 530 or 600C you MUST select IRQ10 using the Advanced setup 
       option. 
     
6.  Select the Install button to start the JetEye driver installation.  The
    Custom button allows you to choose which programs to install and to 
    customize the installation directories.
     
7.  Once the JetEye driver has been installed, you will need to reboot your 
    computer to activate the driver.  Exit Windows and press CTRL + ALT + 
    DELETE to reboot.  Restart Windows.
     
8.  To print, position your portable computer's infrared port in-line with the  
    infrared port on the HP DeskJet 340. They must be lined up within one 
    meter (39 inches) of each other. Make sure your computer is set to print 
    out its infrared port before printing. You are now ready to print as usual 
    from within your application.  
     
If you encounter problems trying to print from the infrared port: 
     
        - Verify COM port and address setting for infrared port. 
        - Verify settings match address specified for JetEye driver. 
        - Verify that your printer is properly configured to print to  
          the infrared port. 
     
     
II.  COMMON QUESTIONS 
     
How far away can my portable computer be from the printer? 
     
Your portable computer should be lined up within 1 meter (39 inches) of the 
infrared port on the printer. 
     
Why does my print job not print? 
     
If you are unable to print, your problem may be related to distance, setup, or 
communication. 
     
Distance: Your portable computer and the printer must be lined up within 1 
meter (39 inches) of each other in order to print. Move the devices closer and 
try again. 
     
Setup: Make sure you have installed the JetEye Drivers floppy on your 
computer. After installing, you will need to reboot your computer before you 
start printing. 
     
Communication: There may be a communication problem between the printer and 
the JetEye.   
     
Verify the following: 
     
        - printer is powered-up and online 
        - printer is properly configured 
        - proper printer driver is installed. 
        - portable computer is set to print out it's infrared port      
     
III.  GENERAL INSTALLATION INFORMATION 
     
During installation:  
     
        - the following files are copied to the hard drive: 
     
                IRJETEYE.SYS; the IrDA protocol driver 
                JETUTIL.EXE; program to disable/enable JetEye driver (DOS 
                               program) 
     
        - the CONFIG.SYS file is modified to load the JetEye driver. 
     
                SYNTAX:  device=c:\irjeteye.sys COM#; where # = 1, 2, 3 or 4 
     
        - the WIN.INI file is modified to allow printing through DOS. 
     
                SYNTAX:  DosPrint=Yes 
     
To install the JetEye driver from DOS: 
     
        - type A:INSTLDOS at the DOS prompt 
        - press Enter to display the first installation screen. 
        - follow installation setups as outlined above. 
     
     
Default infrared port assignments: 
     
                Portable Computer                       Default IR Port  
                                                            Address 
     
  HP OmniBook 300, 425, 430, 530 and 600C                    COM3 
  HP OmniBook 4000, 5000                                     COM2 
  IBM ThinkPad 755CE, 755CSE, 755CD                          COM1 
  IBM ThinkPad 701C, 701CS                                   COM2 
     
     
Custom Installation options: 
     
Copy driver to  - 
     
This option copies the JetEye driver, IRJETEYE.SYS to the specified directory. 
The default is:  C:\ 
     
To store the JetEye driver in another directory, enter the full path name of 
the directory you wish to use in the edit box.  The directory you name must 
already exist. For example if you had created a directory called JETEYE you 
would enter: C:\JETEYE\
     
        NOTE:   If you do not select this option, Install will not              
                copy the JetEye driver onto your PC.  You will  
                need to copy the JetEye driver yourself.  You must  
                have the JetEye driver on your PC before you can  
                print over infrared. 
     
Modify CONFIG.SYS file - 
     
Your original CONFIG.SYS will be saved as CONFIG.BAK.  The install program 
adds the JetEye driver name to the devices listed in your CONFIG.SYS file. 
It adds the following line to the end of your CONFIG.SYS file:  
     
        DEVICE=[path name]IRJETEYE.SYS [IR port] 
     
Where [path name] is the directory where the JetEye driver is located and [IR 
port] identifies the infrared port: COM1, COM2, COM3 or COM4.  For example:  
DEVICE=C:\IRJETEYE.SYS COM2 should be used on a PC where the infrared device 
is attached to COM2.
     
        NOTE:   If you do not select this option, you will need to               
                add the device line to your CONFIG.SYS file yourself.
                This line must be present in order to activate the 
                JetEye driver when you reboot your PC. 
     
Modify WIN.INI file - 
     
Your original CONFIG.SYS will be saved as CONFIG.BAK.  The install program 
will insure the "Fast Print to Port" option is not selected in your printer 
configuration. 
     
        NOTE:   If you do not select this option, you should                     
                verify the state of the "Fast Print to Port" check
                box before doing any infrared printing.   
     
                        - Open the Control Panel 
                        - Double click on the Printer icon 
                        - Choose Connect. (The "Fast Print to Port"              
                          check box is in the lower left corner of
                          the Connect dialog box.) 
                        - Verify the check box is not selected. 
     
Copy driver utility to - 
     
This option copies the JetEye utility JETUTIL.EXE to the specified directory. 
The default is:   C:\ 
     
To store the JetEye utility in another directory, enter the full path name of 
the directory you wish to use in the edit box. The directory you name must 
already exist.  For example, if you had created a directory called JETEYE you 
would enter:  C:\JETEYE\
     
        NOTE:   If you wish to conserve storage space on your PC,                
                do NOT select this option.  The utility file is
                about 8K.  The JetEye utility can be used enable  
                and disable the driver and check the current  status 
                of the driver.  The JetEye utility is  optional, it 
                is necessary to disable the JetEye  driver only when 
                the COM port is not to be used as  an infrared port. 
     
