ASxxxx Assemblers
and
ASLINK Relocating Linker
Version 3.11
January 2002
Page 2
P R E F A C E
The ASxxxx assemblers were written following the style of
several cross assemblers found in the Digital Equipment Corpora-
tion Users Society (DECUS) distribution of the C programming
language. The DECUS code was provided with no documentation as
to the input syntax or the output format. Study of the code
revealed that the unknown author of the code had attempted to
formulate an assembler with attributes similiar to those of the
PDP-11 MACRO assembler (without macro's). The incomplete code
from the DECUS C distribution has been largely rewritten, only
the program structure, and C source file organization remains
relatively unchanged. However, I wish to thank the author for
his contribution to this set of assemblers.
The ASLINK program was written as a companion to the ASxxxx
assemblers, its design and implementation was not derived from
any other work.
The ASxxxx assemblers and the ASLINK relocating linker are
placed in the Public Domain. Publication or distribution of
these programs for non-commercial use is hereby granted with the
stipulation that the copyright notice be included with all
copies.
I would greatly appreciate receiving the details of any
changes, additions, or errors pertaining to these programs and
will attempt to incorporate any fixes or generally useful
changes in a future update to these programs.
Alan R. Baldwin
Kent State University
Physics Department
Kent, Ohio 44242
U.S.A.
http://shop-pdp.kent.edu/ashtml/asxxxx.htm
baldwin@shop-pdp.kent.edu
tel: (330) 672 2531
fax: (330) 672 2959
Page 3
C O N T R I B U T O R S
Thanks to Marko Makela for his contribution of the AS6500
cross assembler.
Marko Makela
Sillitie 10 A
01480 Vantaa
Finland
Internet: Marko.Makela@Helsinki.Fi
EARN/BitNet: msmakela@finuh
Thanks to John Hartman for his contribution of the AS8051
cross assembler and updates to the ASxxxx and ASLINK internals.
John L. Hartman
jhartman@compuserve.com
http://ourworld.compuserve.com/homepages/jhartman/
Thanks to G. Osborn for his contributions to LKS19.C and
LKIHX.C.
G. Osborn
gary@s-4.com
Thanks to Ken Hornstein for his contribution of object
libraries contained in LKLIBR.C.
Ken Hornstein
kenh@cmf.nrl.navy.mil
Page 4
Thanks to Bill McKinnon for his contributions to the AS8XCXXX
cross assembler for the DS8XCXXX series of microprocessors.
Bill McKinnon
w_mckinnon@conknet.com
Thanks to Roger Ivie for his contribution of the ASGB cross
assembler for the GameBoy.
Roger Ivie
ivie@cc.usu.edu
Page 5
ASxxxx Cross Assemblers, Version 3.11, January 2002
Submitted by Alan R. Baldwin,
Kent State University, Kent, Ohio
Operating System: MS-DOS, Windows, Linux
or other supporting K&R C.
Source Langauge: C
Abstract:
The ASxxxx assemblers are a series of microprocessor assem-
blers written in the C programming language. This collection
contains cross assemblers for the 6800(6802/6808), 6801(hd6303),
6804, 6805, 68HC08, 6809, 68HC11, 68HC12, 68HC16, 8051,
8085(8080), z80(hd64180), GameBoy(Z80), H8/3xx, DS8xCxxx and
6500 series microprocessors. Each assembler has a device
specific section which includes: (1) device description, byte
order, and file extension information, (2) a table of assembler
general directives, special directives, assembler mnemonics and
associated operation codes, (3) machine specific code for pro-
cessing the device mnemonics, addressing modes, and special
directives.
The assemblers have a common device independent section which
handles the details of file input/output, symbol table genera-
tion, program/data areas, expression analysis, and assembler
directive processing.
The assemblers provide the following features: (1) alpha-
betized, formatted symbol table listings, (2) relocatable object
modules, (3) global symbols for linking object modules, (4) con-
ditional assembly directives, (5) reusable local symbols, and
(6) include-file processing.
The companion program ASLINK is a relocating linker perform-
ing the following functions: (1) bind multiple object modules
into a single memory image, (2) resolve inter-module symbol
references, (3) resolve undefined symbols from specified
librarys of object modules, (4) process absolute, relative, con-
catenated, and overlay attributes in data and program sections,
(5) perform byte and word program-counter relative (pc or pcr)
addressing calculations, (6) define absolute symbol values at
link time, (7) define absolute area base address values at link
time, (8) produce Intel Hex or Motorola S record output file,
(9) produce a map of the linked memory image, and (10) update
the ASxxxx assembler listing files with the absolute linked ad-
dresses and data.
The assemblers and linker have been tested using Linux,
DJGPP, Cygwin-1.3.x, Sun Solaris (GCC), Symantec C/C++
V6.1/V7.2, and VC6 with MS-DOS/Windows 3.x/9x/NT/2000/XP. Com-
plete source code and documentation for the assemblers and
linker is included with the distribution. Additionally, test
code for each assembler and several microprocessor monitors (
ASSIST05 for the 6805, MONDEB and ASSIST09 for the 6809, and
Page 6
BUFFALO 2.5 for the 6811) are included as working examples of
use of these assemblers.
CHAPTER 1 THE ASSEMBLER 1-1
1.1 THE ASXXXX ASSEMBLERS 1-1
1.1.1 Assembly Pass 1 1-2
1.1.2 Assembly Pass 2 1-2
1.1.3 Assembly Pass 3 1-2
1.2 SOURCE PROGRAM FORMAT 1-3
1.2.1 Statement Format 1-3
1.2.1.1 Label Field 1-3
1.2.1.2 Operator Field 1-5
1.2.1.3 Operand Field 1-5
1.2.1.4 Comment Field 1-6
1.3 SYMBOLS AND EXPRESSIONS 1-6
1.3.1 Character Set 1-6
1.3.2 User-Defined Symbols 1-10
1.3.3 Local Symbols 1-10
1.3.4 Current Location Counter 1-12
1.3.5 Numbers 1-13
1.3.6 Terms 1-14
1.3.7 Expressions 1-14
1.4 GENERAL ASSEMBLER DIRECTIVES 1-16
1.4.1 .module Directive 1-16
1.4.2 .title Directive 1-16
1.4.3 .sbttl Directive 1-17
1.4.4 .page Directive 1-17
1.4.5 .error Directive 1-17
1.4.6 .byte and .db Directives 1-18
1.4.7 .word and .dw Directives 1-18
1.4.8 .3byte Directive 1-19
1.4.9 .4byte or .quad Directive 1-19
1.4.10 .blkb, .blkw, .ds, .blk3, and .blk4
Directives 1-20
1.4.11 .ascii Directive 1-20
1.4.12 .ascis Directive 1-20
1.4.13 .asciz Directive 1-21
1.4.14 .assume Directive 1-21
1.4.15 .radix Directive 1-22
1.4.16 .even Directive 1-22
1.4.17 .odd Directive 1-22
1.4.18 .area Directive 1-23
1.4.19 .org Directive 1-24
1.4.20 .globl Directive 1-25
1.4.21 .if, .else, and .endif Directives 1-25
1.4.22 .include Directive 1-26
1.4.23 .setdp Directive 1-27
1.4.24 .16bit, .24bit, and .32bit Directives 1-29
1.5 INVOKING ASXXXX 1-30
1.6 ERRORS 1-31
1.7 LISTING FILE 1-32
1.8 SYMBOL TABLE FILE 1-34
1.9 OBJECT FILE 1-35
CHAPTER 2 THE LINKER 2-1
2.1 ASLINK RELOCATING LINKER 2-1
2.2 INVOKING ASLINK 2-2
2.3 LIBRARY PATH(S) AND FILE(S) 2-3
2.4 ASLINK PROCESSING 2-4
Page ii
2.5 LINKER INPUT FORMAT 2-6
2.5.1 Object Module Format 2-7
2.5.2 Header Line 2-7
2.5.3 Module Line 2-7
2.5.4 Symbol Line 2-7
2.5.5 Area Line 2-8
2.5.6 T Line 2-8
2.5.7 R Line 2-8
2.5.8 P Line 2-9
2.5.9 24-Bit and 32-Bit Addressing 2-9
2.6 LINKER ERROR MESSAGES 2-10
2.7 INTEL IHX OUTPUT FORMAT (16-BIT) 2-12
2.8 INTEL I86 OUTPUT FORMAT (24 OR 32-BIT) 2-13
2.9 MOTORLA S1-S9 OUTPUT FORMAT (16-BIT) 2-14
2.10 MOTORLA S2-S8 OUTPUT FORMAT (24-BIT) 2-15
2.11 MOTORLA S3-S7 OUTPUT FORMAT (32-BIT) 2-16
CHAPTER 3 BUILDING ASXXXX AND ASLINK 3-1
3.1 BUILDING AN ASSEMBLER 3-1
3.2 BUILDING ASLINK 3-2
APPENDIX A AS6800 ASSEMBLER A-1
A.1 6800 REGISTER SET A-1
A.2 6800 INSTRUCTION SET A-1
A.2.1 Inherent Instructions A-2
A.2.2 Branch Instructions A-2
A.2.3 Single Operand Instructions A-3
A.2.4 Double Operand Instructions A-4
A.2.5 Jump and Jump to Subroutine Instructions A-4
A.2.6 Long Register Instructions A-5
APPENDIX B AS6801 ASSEMBLER B-1
B.1 .hd6303 DIRECTIVE B-1
B.2 6801 REGISTER SET B-1
B.3 6801 INSTRUCTION SET B-1
B.3.1 Inherent Instructions B-2
B.3.2 Branch Instructions B-2
B.3.3 Single Operand Instructions B-3
B.3.4 Double Operand Instructions B-4
B.3.5 Jump and Jump to Subroutine Instructions B-5
B.3.6 Long Register Instructions B-5
B.3.7 6303 Specific Instructions B-5
APPENDIX C AS6804 ASSEMBLER C-1
C.1 6804 REGISTER SET C-1
C.2 6804 INSTRUCTION SET C-1
C.2.1 Inherent Instructions C-2
C.2.2 Branch Instructions C-2
C.2.3 Single Operand Instructions C-2
C.2.4 Jump and Jump to Subroutine Instructions C-2
C.2.5 Bit Test Instructions C-2
C.2.6 Load Immediate data Instruction C-3
Page iii
C.2.7 6804 Derived Instructions C-3
APPENDIX D AS6805 ASSEMBLER D-1
D.1 6805 REGISTER SET D-1
D.2 6805 INSTRUCTION SET D-1
D.2.1 Control Instructions D-2
D.2.2 Bit Manipulation Instructions D-2
D.2.3 Branch Instructions D-2
D.2.4 Read-Modify-Write Instructions D-3
D.2.5 Register\Memory Instructions D-3
D.2.6 Jump and Jump to Subroutine Instructions D-4
APPENDIX E AS6808 ASSEMBLER E-1
E.1 68HC08 REGISTER SET E-1
E.2 68HC08 INSTRUCTION SET E-1
E.2.1 Control Instructions E-2
E.2.2 Bit Manipulation Instructions E-2
E.2.3 Branch Instructions E-3
E.2.4 Complex Branch Instructions E-3
E.2.5 Read-Modify-Write Instructions E-4
E.2.6 Register\Memory Instructions E-5
E.2.7 Double Operand Move Instruction E-5
E.2.8 16-Bit <H:X> Index Register Instructions E-5
E.2.9 Jump and Jump to Subroutine Instructions E-5
APPENDIX F AS6809 ASSEMBLER F-1
F.1 6809 REGISTER SET F-1
F.2 6809 INSTRUCTION SET F-1
F.2.1 Inherent Instructions F-3
F.2.2 Short Branch Instructions F-3
F.2.3 Long Branch Instructions F-3
F.2.4 Single Operand Instructions F-4
F.2.5 Double Operand Instructions F-5
F.2.6 D-register Instructions F-5
F.2.7 Index/Stack Register Instructions F-5
F.2.8 Jump and Jump to Subroutine Instructions F-6
F.2.9 Register - Register Instructions F-6
F.2.10 Condition Code Register Instructions F-6
F.2.11 6800 Compatibility Instructions F-6
APPENDIX G AS6811 ASSEMBLER G-1
G.1 68HC11 REGISTER SET G-1
G.2 68HC11 INSTRUCTION SET G-1
G.2.1 Inherent Instructions G-2
G.2.2 Branch Instructions G-2
G.2.3 Single Operand Instructions G-3
G.2.4 Double Operand Instructions G-4
G.2.5 Bit Manupulation Instructions G-4
G.2.6 Jump and Jump to Subroutine Instructions G-5
G.2.7 Long Register Instructions G-5
Page iv
APPENDIX H AS6812 ASSEMBLER H-1
H.1 68HC12 REGISTER SET H-1
H.2 68HC12 INSTRUCTION SET H-1
H.2.1 Inherent Instructions H-3
H.2.2 Short Branch Instructions H-3
H.2.3 Long Branch Instructions H-3
H.2.4 Branch on Decrement, Test, or Increment H-4
H.2.5 Bit Clear and Set Instructions H-4
H.2.6 Branch on Bit Clear or Set H-4
H.2.7 Single Operand Instructions H-5
H.2.8 Double Operand Instructions H-6
H.2.9 Move Instructions H-6
H.2.10 D-register Instructions H-6
H.2.11 Index/Stack Register Instructions H-7
H.2.12 Jump and Jump/Call to Subroutine
Instructions H-7
H.2.13 Other Special Instructions H-7
H.2.14 Register - Register Instructions H-7
H.2.15 Condition Code Register Instructions H-7
H.2.16 M68HC11 Compatibility Mode Instructions H-8
APPENDIX I AS6816 ASSEMBLER I-1
I.1 68HC16 REGISTER SET I-1
I.2 68HC16 INSTRUCTION SET I-1
I.2.1 Inherent Instructions I-2
I.2.2 Push/Pull Multiple Register Instructions I-3
I.2.3 Short Branch Instructions I-3
I.2.4 Long Branch Instructions I-3
I.2.5 Bit Manipulation Instructions I-3
I.2.6 Single Operand Instructions I-4
I.2.7 Double Operand Instructions I-5
I.2.8 Index/Stack Register Instructions I-5
I.2.9 Jump and Jump to Subroutine Instructions I-6
I.2.10 Condition Code Register Instructions I-6
I.2.11 Multiply and Accumulate Instructions I-6
APPENDIX J ASH8 ASSEMBLER J-1
J.1 H8/3XX REGISTER SET J-1
J.2 H8/3XX INSTRUCTION SET J-1
J.2.1 Inherent Instructions J-2
J.2.2 Branch Instructions J-2
J.2.3 Single Operand Instructions J-3
J.2.4 Double Operand Instructions J-4
J.2.5 Mov Instructions J-5
J.2.6 Bit Manipulation Instructions J-6
J.2.7 Extended Bit Manipulation Instructions J-7
J.2.8 Condition Code Instructions J-7
J.2.9 Other Instructions J-8
J.2.10 Jump and Jump to Subroutine Instructions J-8
APPENDIX K AS8051 ASSEMBLER K-1
K.1 ACKNOWLEDGMENT K-1
Page v
K.2 8051 REGISTER SET K-1
K.3 8051 INSTRUCTION SET K-2
K.3.1 Inherent Instructions K-2
K.3.2 Move Instructions K-3
K.3.3 Single Operand Instructions K-3
K.3.4 Two Operand Instructions K-4
K.3.5 Call and Return Instructions K-4
K.3.6 Jump Instructions K-4
K.3.7 Predefined Symbols: SFR Map K-5
K.3.8 Predefined Symbols: SFR Bit Addresses K-6
K.3.9 Predefined Symbols: Control Bits K-7
APPENDIX L AS8085 ASSEMBLER L-1
L.1 8085 REGISTER SET L-1
L.2 8085 INSTRUCTION SET L-1
L.2.1 Inherent Instructions L-2
L.2.2 Register/Memory/Immediate Instructions L-2
L.2.3 Call and Return Instructions L-2
L.2.4 Jump Instructions L-2
L.2.5 Input/Output/Reset Instructions L-3
L.2.6 Move Instructions L-3
L.2.7 Other Instructions L-3
APPENDIX M AS8XCXXX ASSEMBLER M-1
M.1 ACKNOWLEDGMENTS M-1
M.2 DS8XCXXX ASSEMBLER DIRECTIVES M-1
M.2.1 DS80C390 Addressing Mode Directive M-2
M.3 DS8XCXXX REGISTER SET M-3
M.4 DS8XCXXX INSTRUCTION SET M-3
M.4.1 Inherent Instructions M-4
M.4.2 Move Instructions M-4
M.4.3 Single Operand Instructions M-4
M.4.4 Two Operand Instructions M-5
M.4.5 Call and Return Instructions M-5
M.4.6 Jump Instructions M-5
M.5 DS8XCXXX SPECIAL FUNCTION REGISTERS M-6
M.5.1 SFR Map M-6
M.5.2 Bit Addressable Registers: Generic M-7
M.5.3 Bit Addressable Registers: Specific M-8
M.5.4 Optional Symbols: Control Bits M-9
M.6 DS80C310 SPECIAL FUNCTION REGISTERS M-10
M.6.1 SFR Map M-10
M.6.2 Bit Addressable Registers: Generic M-11
M.6.3 Bit Addressable Registers: Specific M-12
M.6.4 Optional Symbols: Control Bits M-13
M.7 DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS M-14
M.7.1 SFR Map M-14
M.7.2 Bit Addressable Registers: Generic M-15
M.7.3 Bit Addressable Registers: Specific M-16
M.7.4 Optional Symbols: Control Bits M-17
M.8 DS80C390 SPECIAL FUNCTION REGISTERS M-18
M.8.1 SFR Map M-18
Page vi
M.8.2 Bit Addressable Registers: Generic M-19
M.8.3 Bit Addressable Registers: Specific M-20
M.8.4 Optional Symbols: Control Bits M-21
M.9 DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS M-23
M.9.1 SFR Map M-23
M.9.2 Bit Addressable Registers: Generic M-24
M.9.3 Bit Addressable Registers: Specific M-25
M.9.4 Optional Symbols: Control Bits M-26
M.10 DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS M-27
M.10.1 SFR Map M-27
M.10.2 Bit Addressable Registers: Generic M-28
M.10.3 Bit Addressable Registers: Specific M-29
M.10.4 Optional Symbols: Control Bits M-30
M.11 DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS M-31
M.11.1 SFR Map M-31
M.11.2 Bit Addressable Registers: Generic M-33
M.11.3 Bit Addressable Registers: Specific M-34
M.11.4 Optional Symbols: Control Bits M-36
APPENDIX N ASZ80 ASSEMBLER N-1
N.1 .hd64 DIRECTIVE N-1
N.2 Z80 REGISTER SET AND CONDITIONS N-1
N.3 Z80 INSTRUCTION SET N-2
N.3.1 Inherent Instructions N-3
N.3.2 Implicit Operand Instructions N-3
N.3.3 Load Instruction N-4
N.3.4 Call/Return Instructions N-4
N.3.5 Jump and Jump to Subroutine Instructions N-4
N.3.6 Bit Manipulation Instructions N-5
N.3.7 Interrupt Mode and Reset Instructions N-5
N.3.8 Input and Output Instructions N-5
N.3.9 Register Pair Instructions N-5
N.3.10 HD64180 Specific Instructions N-6
APPENDIX O ASGB ASSEMBLER O-1
O.1 ACKNOWLEDGEMENT O-1
O.2 INTRODUCTION O-1
O.3 GAMEBOY REGISTER SET AND CONDITIONS O-1
O.4 GAMEBOY INSTRUCTION SET O-2
O.4.1 .tile Directive O-2
O.4.2 Potentially Controversial Mnemonic Selection O-4
O.4.2.1 Auto-Indexing Loads O-4
O.4.2.2 Input and Output Operations O-4
O.4.2.3 The 'stop' Instruction O-5
O.4.3 Inherent Instructions O-5
O.4.4 Implicit Operand Instructions O-5
O.4.5 Load Instructions O-6
O.4.6 Call/Return Instructions O-6
O.4.7 Jump Instructions O-6
O.4.8 Bit Manipulation Instructions O-6
O.4.9 Input and Output Instructions O-7
O.4.10 Register Pair Instructions O-7
Page vii
APPENDIX P AS6500 ASSEMBLER P-1
P.1 ACKNOWLEDGMENT P-1
P.2 6500 REGISTER SET P-2
P.3 6500 INSTRUCTION SET P-2
P.3.1 Processor Specific Directives P-3
P.3.2 65xx Core Inherent Instructions P-3
P.3.3 65xx Core Branch Instructions P-3
P.3.4 65xx Core Single Operand Instructions P-3
P.3.5 65xx Core Double Operand Instructions P-4
P.3.6 65xx Core Jump and Jump to Subroutine
Instructions P-4
P.3.7 65xx Core Miscellaneous X and Y Register
Instructions P-4
P.3.8 65F11 and 65F12 Specific Instructions P-5
P.3.9 65C00/21 and 65C29 Specific Instructions P-5
P.3.10 65C02, 65C102, and 65C112 Specific
Instructions P-6
CHAPTER 1
THE ASSEMBLER
1.1 THE ASXXXX ASSEMBLERS
The ASxxxx assemblers are a series of microprocessor assem-
blers written in the C programming language. Each assembler has
a device specific section which includes:
1. device description, byte order, and file extension in-
formation
2. a table of the assembler general directives, special
device directives, assembler mnemonics and associated
operation codes
3. machine specific code for processing the device mnemon-
ics, addressing modes, and special directives
The device specific information is detailed in the appendices.
The assemblers have a common device independent section which
handles the details of file input/output, symbol table genera-
tion, program/data areas, expression analysis, and assembler
directive processing.
The assemblers provide the following features:
1. Command string control of assembly functions
2. Alphabetized, formatted symbol table listing
3. Relocatable object modules
4. Global symbols for linking object modules
5. Conditional assembly directives
THE ASSEMBLER PAGE 1-2
THE ASXXXX ASSEMBLERS
6. Program sectioning directives
ASxxxx assembles one or more source files into a single relo-
catable ascii object file. The output of the ASxxxx assemblers
consists of an ascii relocatable object file(*.rel), an assembly
listing file(*.lst), and a symbol file(*.sym).
1.1.1 Assembly Pass 1
During pass 1, ASxxxx opens all source files and performs a
rudimenatry assembly of each source statement. During this pro-
cess all symbol tables are built, program sections defined, and
number of bytes for each assembled source line is estimated.
At the end of pass 1 all undefined symbols may be made global
(external) using the ASxxxx switch -g, otherwise undefined sym-
bols will be flagged as errors during succeeding passes.
1.1.2 Assembly Pass 2
During pass 2 the ASxxxx assembler resolves forward refer-
ences and determines the number of bytes for each assembled
line. The number of bytes used by a particular assembler in-
struction may depend upon the addressing mode, whether the in-
struction allows multiple forms based upon the relative distance
to the addressed location, or other factors. Pass 2 resolves
these cases and determines the address of all symbols.
1.1.3 Assembly Pass 3
Pass 3 by the assembler generates the listing file, the relo-
catable output file, and the symbol tables. Also during pass 3
the errors will be reported.
The relocatable object file is an ascii file containing sym-
bol references and definitions, program area definitions, and
the relocatable assembled code, the linker ASLINK will use this
information to generate an absolute load file (Motorola or Intel
formats).
THE ASSEMBLER PAGE 1-3
SOURCE PROGRAM FORMAT
1.2 SOURCE PROGRAM FORMAT
1.2.1 Statement Format
A source program is composed of assembly-language statements.
Each statement must be completed on one line. A line may con-
tain a maximum of 128 characters, longer lines are truncated and
lost.
An ASxxxx assembler statement may have as many as four
fields. These fields are identified by their order within the
statement and/or by separating characters between fields. The
general format of the ASxxxx statement is:
[label:] Operator Operand [;Comment(s)]
The label and comment fields are optional. The operator and
operand fields are interdependent. The operator field may be an
assembler directive or an assembly mnemonic. The operand field
may be optional or required as defined in the context of the
operator.
ASxxxx interprets and processes source statements one at a
time. Each statement causes a particular operation to be per-
formed.
1.2.1.1 Label Field -
A label is a user-defined symbol which is assigned the value
of the current location counter and entered into the user de-
fined symbol table. The current location counter is used by
ASxxxx to assign memory addresses to the source program state-
ments as they are encountered during the assembly process. Thus
a label is a means of symbolically referring to a specific
statement.
When a program section is absolute, the value of the current
location counter is absolute; its value references an absolute
memory address. Similarly, when a program section is relocat-
able, the value of the current location counter is relocatable.
A relocation bias calculated at link time is added to the ap-
parent value of the current location counter to establish its
effective absolute address at execution time. (The user can
also force the linker to relocate sections defined as absolute.
This may be required under special circumstances.)
If present, a label must be the first field in a source
statement and must be terminated by a colon (:). For example,
THE ASSEMBLER PAGE 1-4
SOURCE PROGRAM FORMAT
if the value of the current location counter is absolute
01F0(H), the statement:
abcd: nop
assigns the value 01F0(H) to the label abcd. If the location
counter value were relocatable, the final value of abcd would be
01F0(H)+K, where K represents the relocation bias of the program
section, as calculated by the linker at link time.
More than one label may appear within a single label field.
Each label so specified is assigned the same address value. For
example, if the value of the current location counter is
1FF0(H), the multiple labels in the following statement are each
assigned the value 1FF0(H):
abcd: aq: $abc: nop
Multiple labels may also appear on successive lines. For ex-
ample, the statements
abcd:
aq:
$abc: nop
likewise cause the same value to be assigned to all three la-
bels.
A double colon (::) defines the label as a global symbol.
For example, the statement
abcd:: nop
establishes the label abcd as a global symbol. The distinguish-
ing attribute of a global symbol is that it can be referenced
from within an object module other than the module in which the
symbol is defined. References to this label in other modules
are resolved when the modules are linked as a composite execut-
able image.
The legal characters for defining labels are:
A through Z
a through z
0 through 9
. (Period)
$ (Dollar sign)
_ (underscore)
A label may be any length, however only the first 79
characters are significant and, therefore must be unique among
all labels in the source program (not necessarily among
THE ASSEMBLER PAGE 1-5
SOURCE PROGRAM FORMAT
separately compiled modules). An error code(s) (m or p) will be
generated in the assembly listing if the first 79 characters in
two or more labels are the same. The m code is caused by the
redeclaration of the symbol or its reference by another state-
ment. The p code is generated because the symbols location is
changing on each pass through the source file.
The label must not start with the characters 0-9, as this
designates a local symbol with special attributes described in a
later section.
The label must not start with the sequence $$, as this
represents the temporary radix 16 for constants.
1.2.1.2 Operator Field -
The operator field specifies the action to be performed. It
may consist of an instruction mnemonic (op code) or an assembler
directive.
When the operator is an instruction mnemonic, a machine in-
struction is generated and the assembler evaluates the addresses
of the operands which follow. When the operator is a directive
ASxxxx performs certain control actions or processing operations
during assembly of the source program.
Leading and trailing spaces or tabs in the operator field
have no significance; such characters serve only to separate
the operator field from the preceeding and following fields.
An operator is terminated by a space, tab or end of line.
1.2.1.3 Operand Field -
When the operator is an instruction mnemonic (op code), the
operand field contains program variables that are to be
evaluated/manipulated by the operator.
Operands may be expressions or symbols, depending on the
operator. Multiple expressions used in the operand fields may
be separated by a comma. An operand should be preceeded by an
operator field; if it is not, the statement will give an error
(q or o). All operands following instruction mnemonics are
treated as expressions.
The operand field is terminated by a semicolon when the field
is followed by a comment. For example, in the following
statement:
label: lda abcd,x ;Comment field
THE ASSEMBLER PAGE 1-6
SOURCE PROGRAM FORMAT
the tab between lda and abcd terminates the operator field and
defines the beginning of the operand field; a comma separates
the operands abcd and x; and a semicolon terminates the operand
field and defines the beginning of the comment field. When no
comment field follows, the operand field is terminated by the
end of the source line.
1.2.1.4 Comment Field -
The comment field begins with a semicolon and extends through
the end of the line. This field is optional and may contain any
7-bit ascii character except null.
Comments do not affect assembly processing or program execu-
tion.
1.3 SYMBOLS AND EXPRESSIONS
This section describes the generic components of the ASxxxx
assemblers: the character set, the conventions observed in con-
structing symbols, and the use of numbers, operators, and ex-
pressions.
1.3.1 Character Set
The following characters are legal in ASxxxx source programs:
1. The letters A through Z. Both upper- and lower-case
letters are acceptable. The assemblers, by default,
are not case sensitive, i.e. ABCD and abcd are the
same symbols. (The assemblers can be made case sensi-
tive by using the -z command line option.)
2. The digits 0 through 9
3. The characters . (period), $ (dollar sign), and _ (un-
derscore).
4. The special characters listed in Tables 1 through 6.
Tables 1 through 6 describe the various ASxxxx label and
field terminators, assignment operators, operand separators, as-
sembly, unary, binary, and radix operators.
THE ASSEMBLER PAGE 1-7
SYMBOLS AND EXPRESSIONS
Table 1 Label Terminators and Assignment Operators
----------------------------------------------------------------
: Colon Label terminator.
:: Double colon Label Terminator; defines the
label as a global label.
= Equal sign Direct assignment operator.
== Double equal Direct assignment operator;
sign defines the symbol as a global
symbol.
----------------------------------------------------------------
Table 2 Field Terminators and Operand Separators
----------------------------------------------------------------
Tab Item or field terminator.
Space Item or field terminator.
, Comma Operand field separator.
; Semicolon Comment field indicator.
----------------------------------------------------------------
Table 3 Assembler Operators
----------------------------------------------------------------
# Number sign Immediate expression indicator.
. Period Current location counter.
( Left parenthesis Expression delimiter.
) Right parenthesis Expression delimeter.
----------------------------------------------------------------
THE ASSEMBLER PAGE 1-8
SYMBOLS AND EXPRESSIONS
Table 4 Unary Operators
----------------------------------------------------------------
< Left bracket <FEDC Produces the lower byte
value of the expression.
(DC)
> Right bracket >FEDC Produces the upper byte
value of the expression.
(FE)
+ Plus sign +A Positive value of A
- Minus sign -A Produces the negative
(2's complement) of A.
~ Tilde ~A Produces the 1's comple-
ment of A.
' Single quote 'D Produces the value of
the character D.
" Double quote "AB Produces the double byte
value for AB.
\ Backslash '\n Unix style characters
\b, \f, \n, \r, \t
or '\001 or octal byte values.
----------------------------------------------------------------
THE ASSEMBLER PAGE 1-9
SYMBOLS AND EXPRESSIONS
Table 5 Binary Operators
----------------------------------------------------------------
<< Double 0800 << 4 Produces the 4 bit
Left bracket left-shifted value of
0800. (8000)
>> Double 0800 >> 4 Produces the 4 bit
Right bracket right-shifted value of
0800. (0080)
+ Plus sign A + B Arithmetic Addition
operator.
- Minus sign A - B Arithmetic Subtraction
operator.
* Asterisk A * B Arithmetic Multiplica-
tion operator.
/ Slash A / B Arithmetic Division
operator.
& Ampersand A & B Logical AND operator.
| Bar A | B Logical OR operator.
% Percent sign A % B Modulus operator.
^ Up arrow or A ^ B EXCLUSIVE OR operator.
circumflex
----------------------------------------------------------------
Table 6 Temporary Radix Operators
----------------------------------------------------------------
$%, 0b, 0B Binary radix operator.
$&, 0o, 0O, 0q, 0Q Octal radix operator.
$#, 0d, 0D Decimal radix operator.
$$, 0h, 0H, 0x, 0X Hexidecimal radix operator.
Potential ambiguities arising from the use of 0b and 0d
as temporary radix operators may be circumvented by
THE ASSEMBLER PAGE 1-10
SYMBOLS AND EXPRESSIONS
preceding all non-prefixed hexidecimal numbers with 00.
Leading 0's are required in any case where the first
hexidecimal digit is abcdef as the assembler will treat
the letter sequence as a label.
----------------------------------------------------------------
1.3.2 User-Defined Symbols
User-defined symbols are those symbols that are equated to a
specific value through a direct assignment statement or appear
as labels. These symbols are added to the User Symbol Table as
they are encountered during assembly.
The following rules govern the creation of user-defined symbols:
1. Symbols can be composed of alphanumeric characters,
dollar signs ($), periods (.), and underscores (_)
only.
2. The first character of a symbol must not be a number
(except in the case of local symbols).
3. The first 79 characters of a symbol must be unique. A
symbol can be written with more than 79 legal
characters, but the 80th and subsequent characters are
ignored.
4. Spaces and Tabs must not be embedded within a symbol.
1.3.3 Local Symbols
Local symbols are specially formatted symbols used as labels
within a block of coding that has been delimited as a local sym-
bol block. Local symbols are of the form n$, where n is a
decimal integer from 0 to 255, inclusive. Examples of local
symbols are:
1$
27$
138$
244$
THE ASSEMBLER PAGE 1-11
SYMBOLS AND EXPRESSIONS
The range of a local symbol block consists of those state-
ments between two normally constructed symbolic labels. Note
that a statement of the form:
ALPHA = EXPRESSION
is a direct assignment statement but does not create a label and
thus does not delimit the range of a local symbol block.
Note that the range of a local symbol block may extend across
program areas.
Local symbols provide a convenient means of generating labels
for branch instructions and other such references within local
symbol blocks. Using local symbols reduces the possibility of
symbols with multiple definitions appearing within a user pro-
gram. In addition, the use of local symbols differentiates
entry-point labels from local labels, since local labels cannot
be referenced from outside their respective local symbol blocks.
Thus, local symbols of the same name can appear in other local
symbol blocks without conflict. Local symbols require less sym-
bol table space than normal symbols. Their use is recommended.
The use of the same local symbol within a local symbol block
will generate one or both of the m or p errors.
Example of local symbols:
a: ldx #atable ;get table address
lda #0d48 ;table length
1$: clr ,x+ ;clear
deca
bne 1$
b: ldx #btable ;get table address
lda #0d48 ;table length
1$: clr ,x+ ;clear
deca
bne 1$
THE ASSEMBLER PAGE 1-12
SYMBOLS AND EXPRESSIONS
1.3.4 Current Location Counter
The period (.) is the symbol for the current location coun-
ter. When used in the operand field of an instruction, the
period represents the address of the first byte of the
instruction:
AS: ldx #. ;The period (.) refers to
;the address of the ldx
;instruction.
When used in the operand field of an ASxxxx directive, it
represents the address of the current byte or word:
QK = 0
.word 0xFFFE,.+4,QK ;The operand .+4 in the .word
;directive represents a value
;stored in the second of the
;three words during assembly.
If we assume the current value of the program counter is
0H0200, then during assembly, ASxxxx reserves three words of
storage starting at location 0H0200. The first value, a hex-
idecimal constant FFFE, will be stored at location 0H0200. The
second value represented by .+4 will be stored at location
0H0202, its value will be 0H0206 ( = 0H0202 + 4). The third
value defined by the symbol QK will be placed at location
0H0204.
At the beginning of each assembly pass, ASxxxx resets the lo-
cation counter. Normally, consecutive memory locations are as-
signed to each byte of object code generated. However, the
value of the location counter can be changed through a direct
assignment statement of the following form:
. = . + expression
The new location counter can only be specified relative to
the current location counter. Neglecting to specify the current
program counter along with the expression on the right side of
the assignment operator will generate the (.) error. (Absolute
program areas may use the .org directive to specify the absolute
location of the current program counter.)
The following coding illustrates the use of the current location
counter:
.area CODE1 (ABS) ;program area CODE1
;is ABSOLUTE
THE ASSEMBLER PAGE 1-13
SYMBOLS AND EXPRESSIONS
.org 0H100 ;set location to
;0H100 absolute
num1: ldx #.+0H10 ;The label num1 has
;the value 0H100.
;X is loaded with
;0H100 + 0H10
.org 0H130 ;location counter
;set to 0H130
num2: ldy #. ;The label num2 has
;the value 0H130.
;Y is loaded with
;value 0H130.
.area CODE2 (REL) ;program area CODE2
;is RELOCATABLE
. = . + 0H20 ;Set location counter
;to relocatable 0H20 of
;the program section.
num3: .word 0 ;The label num3 has
;the value
;of relocatable 0H20.
. = . + 0H40 ;will reserve 0H40
;bytes of storage as will
.blkb 0H40 ;or
.blkw 0H20
The .blkb and .blkw directives are the preferred methods of
allocating space.
1.3.5 Numbers
ASxxxx assumes that all numbers in the source program are to
be interpreted in decimal radix unless otherwise specified. The
.radix directive may be used to specify the default as octal,
decimal, or hexidecimal. Individual numbers can be designated
as binary, octal, decimal, or hexidecimal through the temporary
radix prefixes shown in table 6.
Negative numbers must be preceeded by a minus sign; ASxxxx
translates such numbers into two's complement form. Positive
numbers may (but need not) be preceeded by a plus sign.
THE ASSEMBLER PAGE 1-14
SYMBOLS AND EXPRESSIONS
Numbers are always considered to be absolute values, therefor
they are never relocatable.
1.3.6 Terms
A term is a component of an expression and may be one of the
following:
1. A number.
2. A symbol:
1. A period (.) specified in an expression causes the
current location counter to be used.
2. A User-defined symbol.
3. An undefined symbol is assigned a value of zero and
inserted in the User-Defined symbol table as an un-
defined symbol.
3. A single quote followed by a single ascii character, or
a double quote followed by two ascii characters.
4. An expression enclosed in parenthesis. Any expression
so enclosed is evaluated and reduced to a single term
before the remainder of the expression in which it ap-
pears is evaluated. Parenthesis, for example, may be
used to alter the left-to-right evaluation of expres-
sions, (as in A*B+C versus A*(B+C)), or to apply a un-
ary operator to an entire expression (as in -(A+B)).
5. A unary operator followed by a symbol or number.
1.3.7 Expressions
Expressions are combinations of terms joined together by
binary operators. Expressions reduce to a value. The evalua-
tion of an expression includes the determination of its attri-
butes. A resultant expression value may be one of three types
(as described later in this section): relocatable, absolute,
and external.
THE ASSEMBLER PAGE 1-15
SYMBOLS AND EXPRESSIONS
Expressions are evaluate with an operand hierarchy as follows:
* / % multiplication,
division, and
modulus first.
+ - addition and
subtraction second.
<< >> left shift and
right shift third.
^ exclusive or fourth.
& logical and fifth.
| logical or last
except that unary operators take precedence over binary
operators.
A missing or illegal operator terminates the expression
analysis, causing error codes (o) and/or (q) to be generated
depending upon the context of the expression itself.
At assembly time the value of an external (global) expression
is equal to the value of the absolute part of that expression.
For example, the expression external+4, where 'external' is an
external symbol, has the value of 4. This expression, however,
when evaluated at link time takes on the resolved value of the
symbol 'external', plus 4.
Expressions, when evaluated by ASxxxx, are one of three
types: relocatable, absolute, or external. The following dis-
tinctions are important:
1. An expression is relocatable if its value is fixed re-
lative to the base address of the program area in which
it appears; it will have an offset value added at link
time. Terms that contain labels defined in relocatable
program areas will have a relocatable value; simi-
larly, a period (.) in a relocatable program area,
representing the value of the current program location
counter, will also have a relocatable value.
2. An expression is absolute if its value is fixed. An
expression whose terms are numbers and ascii characters
will reduce to an absolute value. A relocatable ex-
pression or term minus a relocatable term, where both
elements being evaluated belong to the same program
area, is an absolute expression. This is because every
THE ASSEMBLER PAGE 1-16
SYMBOLS AND EXPRESSIONS
term in a program area has the same relocation bias.
When one term is subtracted from the other the reloca-
tion bias is zero.
3. An expression is external (or global) if it contains a
single global reference (plus or minus an absolute ex-
pression value) that is not defined within the current
program. Thus, an external expression is only par-
tially defined following assembly and must be resolved
at link time.
1.4 GENERAL ASSEMBLER DIRECTIVES
An ASxxxx directive is placed in the operator field of the
source line. Only one directive is allowed per source line.
Each directive may have a blank operand field or one or more
operands. Legal operands differ with each directive.
1.4.1 .module Directive
Format:
.module string
The .module directive causes the string to be included in the
assemblers output file as an identifier for this particular ob-
ject module. The string may be from 1 to 79 characters in
length. Only one identifier is allowed per assembled module.
The main use of this directive is to allow the linker to report
a modules' use of undefined symbols. At link time all undefined
symbols are reported and the modules referencing them are
listed.
1.4.2 .title Directive
Format:
.title string
The .title directive provides a character string to be placed
on the second line of each page during listing.
THE ASSEMBLER PAGE 1-17
GENERAL ASSEMBLER DIRECTIVES
1.4.3 .sbttl Directive
Format:
.sbttl string
The .sbttl directive provides a character string to be placed
on the third line of each page during listing.
1.4.4 .page Directive
Format:
.page
The .page directive causes a page ejection with a new heading
to be printed. The new page occurs after the next line of the
source program is processed, this allows an immediately follow-
ing .sbttl directive to appear on the new page. The .page
source line will not appear in the file listing. Paging may be
disabled by invoking the -p directive.
1.4.5 .error Directive
Format:
.error exp
where: exp represents an absolute expression. If the
evaluation of the expression results in a non
zero value then an 'e' error is reported and the
text line is listed in the generated error.
The .error directive is useful to report configuration or
value errors during the assembly process. (The .error directive
is identical in function to the .assume directive, just perhaps
more descriptive.)
THE ASSEMBLER PAGE 1-18
GENERAL ASSEMBLER DIRECTIVES
1.4.6 .byte and .db Directives
Format:
.byte exp ;Stores the binary value
.db exp ;of the expression in the
;next byte.
.byte exp1,exp2,expn ;Stores the binary values
.db exp1,exp2,expn ;of the list of expressions
;in successive bytes.
where: exp, represent expressions that will be
exp1, truncated to 8-bits of data.
. Each expression will be calculated,
. the high-order byte will be truncated.
. Multiple expressions must be
expn separated by commas.
The .byte or .db directives are used to generate successive
bytes of binary data in the object module.
1.4.7 .word and .dw Directives
Format:
.word exp ;Stores the binary value
.dw exp ;of the expression in
;the next word.
.word exp1,exp2,expn ;Stores the binary values
.dw exp1,exp2,expn ;of the list of expressions
;in successive words.
where: exp, represent expressions that will occupy two
exp1, bytes of data. Each expression will be
. calculated as a 16-bit word expression.
. Multiple expressions must be
expn separated by commas.
The .word or .dw directives are used to generate successive
words of binary data in the object module.
THE ASSEMBLER PAGE 1-19
GENERAL ASSEMBLER DIRECTIVES
1.4.8 .3byte Directive
Format:
.3byte exp ;Stores the binary value
;of the expression in
;the next triple (3 bytes).
.3byte exp1,exp2,expn ;Stores the binary values
;of the list of expressions
;in successive triples
;(3 bytes).
where: exp, represent expressions that will occupy three
exp1, bytes of data. Each expression will be
. calculated as a 24-bit word expression.
. Multiple expressions must be
expn separated by commas.
The .3byte directive is used to generate successive triples
of binary data in the object module. (This directive is only
available in assemblers supporting 24-bit addressing.)
1.4.9 .4byte or .quad Directive
Format:
.4byte exp ;Stores the binary value
.quad exp ;of the expression in
;the next quad (4 bytes).
.4byte exp1,exp2,expn ;Stores the binary values
.quad exp1,exp2,expn ;of the list of expressions
;in successive quads
;(4 bytes).
where: exp, represent expressions that will occupy three
exp1, bytes of data. Each expression will be
. calculated as a 32-bit word expression.
. Multiple expressions must be
expn separated by commas.
The .4byte or .quad directive is used to generate successive
quads of binary data in the object module. (This directive is
only available in assemblers supporting 32-bit addressing.)
THE ASSEMBLER PAGE 1-20
GENERAL ASSEMBLER DIRECTIVES
1.4.10 .blkb, .blkw, .ds, .blk3, and .blk4 Directives
Format:
.blkb N ;reserve N bytes of space
.blkw N ;reserve N words of space
.ds N ;reserve N bytes of space
.blk3 N ;reserve N triples of space
.blk4 N ;reserve N quads of space
The .blkb and .ds directives reserve byte blocks in the ob-
ject module; the .blkw directive reserves word blocks; the
.blk3 reserves 3 byte blocks(available in assembles supporting
24-bit addressing); the .blk4 reserves 4 byte blocks (available
in assemblers supporting 32-bit addressing).
1.4.11 .ascii Directive
Format:
.ascii /string/
where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .ascii
directive will give the (q) error.
The .ascii directive places one binary byte of data for each
character in the string into the object module.
1.4.12 .ascis Directive
Format:
.ascis /string/
where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .ascis
directive will give the (q) error.
The .ascis directive places one binary byte of data for each
THE ASSEMBLER PAGE 1-21
GENERAL ASSEMBLER DIRECTIVES
character in the string into the object module. The last
character in the string will have the high order bit set.
1.4.13 .asciz Directive
Format:
.asciz /string/
where: string is a string of printable ascii characters.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .asciz
directive will give the (q) error.
The .asciz directive places one binary byte of data for each
character in the string into the object module. Following all
the character data a zero byte is inserted to terminate the
character string.
1.4.14 .assume Directive
Format:
.assume exp
where: exp represents an absolute expression. If the
evaluation of the expression results in a non
zero value then an 'e' error is reported and the
text line is listed in the generated error.
The .assume directive is useful to check assumptions about
assembler values. (The .assume directive is identical in func-
tion to the .error directive, just perhaps more descriptive.)
THE ASSEMBLER PAGE 1-22
GENERAL ASSEMBLER DIRECTIVES
1.4.15 .radix Directive
Format:
.radix character
where: character represents a single character specifying the
default radix to be used for succeeding numbers. The
character may be any one of the following:
B,b Binary
O,o Octal
Q,q
D,d Decimal
'blank'
H,h Hexidecimal
X,x
1.4.16 .even Directive
Format:
.even
The .even directive ensures that the current location counter
contains an even boundary value by adding 1 if the current loca-
tion is odd.
1.4.17 .odd Directive
Format:
.odd
The .odd directive ensures that the current location counter
contains an odd boundary value by adding one if the current lo-
cation is even.
THE ASSEMBLER PAGE 1-23
GENERAL ASSEMBLER DIRECTIVES
1.4.18 .area Directive
Format:
.area name [(options)]
where: name represents the symbolic name of the program sec-
tion. This name may be the same as any
user-defined symbol as the area names are in-
dependent of all symbols and labels.
options specify the type of program or data area:
ABS absolute (automatically invokes OVR)
REL relocatable
OVR overlay
CON concatenate
PAG paged area
The .area directive provides a means of defining and separat-
ing multiple programming and data sections. The name is the
area label used by the assembler and the linker to collect code
from various separately assembled modules into one section. The
name may be from 1 to 79 characters in length.
The options are specified within parenthesis and separated by
commas as shown in the following example:
.area TEST (REL,CON) ;This section is relocatable
;and concatenated with other
;sections of this program area.
.area DATA (REL,OVR) ;This section is relocatable
;and overlays other sections
;of this program area.
.area SYS (ABS,OVR) ;(CON not allowed with ABS)
;This section is defined as
;absolute. Absolute sections
;are always overlayed with
;other sections of this program
;area.
.area PAGE (PAG) ;This is a paged section. The
;section must be on a 256 byte
;boundary and its length is
;checked by the linker to be
;no larger than 256 bytes.
;This is useful for direct page
;areas.
THE ASSEMBLER PAGE 1-24
GENERAL ASSEMBLER DIRECTIVES
The default area type is REL|CON; i.e. a relocatable sec-
tion which is concatenated with other sections of code with the
same area name. The ABS option indicates an absolute area. The
OVR and CON options indicate if program sections of the same
name will overlay each other (start at the same location) or be
concatenated with each other (appended to each other).
Multiple invocations of the .area directive with the same
name must specify the same options or leave the options field
blank, this defaults to the previously specified options for
this program area.
The ASxxxx assemblers automatically provide two program
sections:
'. .ABS.' This dumby section contains all absolute
symbols and their values.
'_CODE' This is the default program/data area.
This program area is of type (REL,CON).
The ASxxxx assemblers also automatically generate two symbols
for each program area:
's_<area>' This is the starting address of the pro-
gram area.
'l_<area>' This is the length of the program area.
The .area names and options are never case sensitive.
1.4.19 .org Directive
Format:
.org exp
where: exp is an absolute expression that becomes the cur-
rent location counter.
The .org directive is valid only in an absolute program section
and will give a (q) error if used in a relocatable program area.
The .org directive specifies that the current location counter
is to become the specified absolute value.
THE ASSEMBLER PAGE 1-25
GENERAL ASSEMBLER DIRECTIVES
1.4.20 .globl Directive
Format:
.globl sym1,sym2,...,symn
where: sym1, represent legal symbolic names. When
sym2,... When multiple symbols are specified,
symn they are separated by commas.
A .globl directive may also have a label field and/or a com-
ment field.
The .globl directive is provided to define (and thus provide
linkage to) symbols not otherwise defined as global symbols
within a module. In defining global symbols the directive
.globl J is similar to:
J == expression or J::
Because object modules are linked by global symbols, these
symbols are vital to a program. All internal symbols appearing
within a given program must be defined at the end of pass 1 or
they will be considered undefined. The assembly directive (-g)
can be be invoked to make all undefined symbols global at the
end of pass 1.
1.4.21 .if, .else, and .endif Directives
Format:
.if expr
. ;}
. ;} range of true condition
. ;}
.else
. ;}
. ;} range of false condition
. ;}
.endif
The conditional assembly directives allow you to include or
exclude blocks of source code during the assembly process, based
on the evaluation of the condition test.
The range of true condition will be processed if the expres-
sion 'expr' is not zero (i.e. true) and the range of false con-
dition will be processed if the expression 'expr' is zero (i.e
false). The range of true condition is optional as is the .else
directive and the range of false condition. The following are
all valid .if/.else/.endif constructions:
THE ASSEMBLER PAGE 1-26
GENERAL ASSEMBLER DIRECTIVES
.if A-4 ;evaluate A-4
.byte 1,2 ;insert bytes if A-4 is
.endif ;not zero
.if K+3 ;evaluate K+3
.else
.byte 3,4 ;insert bytes if K+3
.endif ;is zero
.if J&3 ;evaluate J masked by 3
.byte 12 ;insert this byte if J&3
.else ;is not zero
.byte 13 ;insert this byte if J&3
.endif ;is zero
The .if/.else/.endif directives may be nested upto 10 levels.
The .page directive is processed within a false condition
range to allow extended textual information to be incorporated
in the source program with out the need to use the comment
delimiter (;):
.if 0
.page
This text will be bypassed during assembly
but appear in the listing file.
.
.
.
.endif
1.4.22 .include Directive
Format:
.include string
where: string represents a delimited string that is the file
specification of an ASxxxx source file.
The .include directive is used to insert a source file within
the source file currently being assembled. When this directive
is encountered, an implicit .page directive is issued. When the
end of the specified source file is reached, an implicit .page
directive is issued and input continues from the previous source
file. The maximum nesting level of source files specified by a
.include directive is five.
THE ASSEMBLER PAGE 1-27
GENERAL ASSEMBLER DIRECTIVES
The total number of separately specified .include files is
unlimited as each .include file is opened and then closed during
each pass made by the assembler.
The default directory path, if none is specified, for any
.include file is the directory path of the current file. For
example: if the current source file, D:\proj\file1.asm, in-
cludes a file specified as "include1" then the file
D:\proj\include1.asm is opened.
1.4.23 .setdp Directive
Format:
.setdp [base [,area]]
The set direct page directive has a common format in all the
AS68xx assemblers. The .setdp directive is used to inform the
assembler of the current direct page region and the offset ad-
dress within the selected area. The normal invocation methods
are:
.area DIRECT (PAG)
.setdp
or
.setdp 0,DIRECT
for all the 68xx microprocessors (the 6804 has only the paged
ram area). The commands specify that the direct page is in area
DIRECT and its offset address is 0 (the only valid value for all
but the 6809 microprocessor). Be sure to place the DIRECT area
at address 0 during linking. When the base address and area are
not specified, then zero and the current area are the defaults.
If a .setdp directive is not issued the assembler defaults the
direct page to the area "_CODE" at offset 0.
The assembler verifies that any local variable used in a
direct variable reference is located in this area. Local vari-
able and constant value direct access addresses are checked to
be within the address range from 0 to 255.
External direct references are assumed by the assembler to be
in the correct area and have valid offsets. The linker will
check all direct page relocations to verify that they are within
the correct area.
The 6809 microprocessor allows the selection of the direct
page to be on any 256 byte boundary by loading the appropriate
THE ASSEMBLER PAGE 1-28
GENERAL ASSEMBLER DIRECTIVES
value into the dp register. Typically one would like to select
the page boundary at link time, one method follows:
.area DIRECT (PAG) ; define the direct page
.setdp
.
.
.
.area PROGRAM
.
ldd #DIRECT ; load the direct page register
tfr a,dp ; for access to the direct page
At link time specify the base and global equates to locate the
direct page:
-b DIRECT = 0x1000
-g DIRECT = 0x1000
Both the area address and offset value must be specified (area
and variable names are independent). The linker will verify
that the relocated direct page accesses are within the direct
page.
The preceeding sequence could be repeated for multiple paged
areas, however an alternate method is to define a non-paged area
and use the .setdp directive to specify the offset value:
.area DIRECT ; define non-paged area
.
.
.
.area PROGRAM
.
.setdp 0,DIRECT ; direct page area
ldd #DIRECT ; load the direct page register
tfr a,dp ; for access to the direct page
.
.
.setdp 0x100,DIRECT ; direct page area
ldd #DIRECT+0x100 ; load the direct page register
tfr a,dp ; for access to the direct page
The linker will verify that subsequent direct page references
are in the specified area and offset address range. It is the
programmers responsibility to load the dp register with the cor-
rect page segment corresponding to the .setdp base address
specified.
For those cases where a single piece of code must access a
defined data structure within a direct page and there are many
pages, define a dumby direct page linked at address 0. This
dumby page is used only to define the variable labels. Then
THE ASSEMBLER PAGE 1-29
GENERAL ASSEMBLER DIRECTIVES
load the dp register with the real base address but donot use a
.setdp directive. This method is equivalent to indexed address-
ing, where the dp register is the index register and the direct
addressing is the offset.
1.4.24 .16bit, .24bit, and .32bit Directives
Format:
.16bit ;specify 16-bit addressing
.24bit ;specify 24-bit addressing
.32bit ;specify 32-bit addressing
The .16bit, .24bit, and .32bit directives are special direc-
tives for assembler configuration when default values are not
used. (Currently only the as8xCxxx assembler can use the .16bit
and .24bit directives in special mode.)
THE ASSEMBLER PAGE 1-30
GENERAL ASSEMBLER DIRECTIVES
1.5 INVOKING ASXXXX
The ASxxxx assemblers are command line oriented. Most sytems
require the option(s) and file(s) arguments to follow the ASxxxx
assembler name:
as6809 [-dqxgalopswzff] file1 [file2 file3 ... file6]
Some systems may request the arguments after the assembler is
started at a system specific prompt:
as6809
argv: [-dqxgalopswzff] file1 [file2 file3 ... file6]
The options are:
d decimal listing
q octal listing
x hex listing (default)
The listing radix affects the
.lst, .rel, and .sym files.
g undefined symbols made global
a all user symbols made global
l create list output file1.lst
o create object output file1.rel
s create symbol output file1.sym
p disable listing pagination
w wide listing format for symbol table
z enable case sensitivity for symbols
relocatable reference flagging:
f by ` in the listing file
ff by mode in the listing file
The file name for the .lst, .rel, and .sym files is the first
file name specified in the command line. All output files are
ascii text files which may be edited, copied, etc. The output
files are the concatenation of all the input files, if files are
to be assembled independently invoke the assembler for each
file.
THE ASSEMBLER PAGE 1-31
INVOKING ASXXXX
The .rel file contains a radix directive so that the linker
will use the proper conversion for this file. Linked files may
have different radices.
If the list (l) option is specified without the symbol table
(s) option, the symbol table is placed at the end of the listing
file.
1.6 ERRORS
The ASxxxx assemblers provide limited diagnostic error codes
during the assembly process, these errors will be noted in the
listing file and printed on the stderr device.
The assembler reports the errors on the stderr device as
?ASxxxx-Error-<*> in line nnn of filename
where * is the error code, nnn is the line number, and filename
is the source/include file.
The errors are:
(.) This error is caused by an absolute direct assign-
ment of the current location counter
. = expression (incorrect)
rather than the correct
. = . + expression
(a) Indicates a machine specific addressing or address-
ing mode error.
(b) Indicates a direct page boundary error.
(d) Indicates a direct page addressing error.
(e) Caused by a .error or .assume directive.
(i) Caused by an .include file error or an .if/.endif
mismatch.
(m) Multiple definitions of the same label, multiple
.module directives, or multiple conflicting attri-
butes in an .area directive.
(o) Directive or mnemonic error or the use of the .org
directive in a relocatable area.
(p) Phase error: label location changing between passes
2 and 3. Normally caused by having more than one
THE ASSEMBLER PAGE 1-32
ERRORS
level of forward referencing.
(q) Questionable syntax: missing or improper operators,
terminators, or delimiters.
(r) Relocation error: logic operation attempted on a
relocatable term, addition of two relocatable terms,
subtraction of two relocatable terms not within the
same programming area or external symbols.
(u) Undefined symbol encountered during assembly.
(z) Divide by 0 or Modulus by 0 error: result is 0.
1.7 LISTING FILE
The (-l) option produces an ascii output listing file. Each
page of output contains a five line header:
1. The ASxxxx program name and page number
2. Assembler Radix and Address Bits
3. Title from a .title directive (if any)
4. Subtitle from a .sbttl directive (if any)
5. Blank line
Each succeeding line contains five fields:
1. Error field (first three characters of line)
2. Current location counter
3. Generated code in byte format
4. Source text line number
5. Source text
The error field may contain upto 2 error flags indicating any
errors encountered while assembling this line of source code.
THE ASSEMBLER PAGE 1-33
LISTING FILE
The current location counter field displays the 16-bit,
24-bit, or 32-bit program position. This field will be in the
selected radix.
The generated code follows the program location. The listing
radix determines the number of bytes that will be displayed in
this field. Hexidecimal listing allows six bytes of data within
the field, decimal and octal allow four bytes within the field.
If more than one field of data is generated from the assembly of
a single line of source code, then the data field is repeated on
successive lines.
The source text line number is printed in decimal and is fol-
lowed by the source text.
Two special cases will disable the listing of a line of
source text:
1. Source line with a .page directive is never listed.
2. Source line with a .include file directive is not
listed unless the .include file cannot be opened.
Two data field options are available to flag those bytes
which will be relocated by the linker. If the -f option is
specified then each byte to be relocated will be preceeded by
the '`' character. If the -ff option is specified then each
byte to be relocated will be preceeded by one of the following
characters:
1. * paged relocation
2. u low byte of unsigned word or unsigned byte
3. v high byte of unsigned word
4. p PCR low byte of word relocation or PCR byte
5. q PCR high byte of word relocation
6. r low byte relocation or byte relocation
7. s high byte relocation
Assemblers which use 24-bit or 32-bit addressing use an ex-
tended flagging mode:
1. * paged relocation
THE ASSEMBLER PAGE 1-34
LISTING FILE
2. u 1st byte of unsigned value
3. v 2nd byte of unsigned value
4. U 3rd byte of unsigned value
5. V 4th byte of unsigned value
6. p PCR 1st byte of relocation value or PCR byte
7. q PCR 2nd byte of relocation value
8. P PCR 3rd byte of relocation value
9. Q PCR 4th byte of relocation value
10. r 1st byte of relocation value or byte relocation
11. s 2nd byte of relocation value
12. R 3rd byte of relocation value
13. S 4th byte of relocation value
1.8 SYMBOL TABLE FILE
The symbol table has two parts:
1. The alphabetically sorted list of symbols and/or labels
defined or referenced in the source program.
2. A list of the program areas defined during assembly of
the source program.
The sorted list of symbols and/or labels contains the follow-
ing information:
1. Program area number (none if absolute value or exter-
nal)
2. The symbol or label
3. Directly assigned symbol is denoted with an (=) sign
4. The value of a symbol, location of a label relative to
the program area base address (=0), or a **** indicat-
ing the symbol or label is undefined.
THE ASSEMBLER PAGE 1-35
SYMBOL TABLE FILE
5. The characters: G - global, R - relocatable, and X -
external.
The list of program areas provides the correspondence between
the program area numbers and the defined program areas, the size
of the program areas, and the area flags (attributes).
1.9 OBJECT FILE
The object file is an ascii file containing the information
needed by the linker to bind multiple object modules into a com-
plete loadable memory image. The object module contains the
following designators:
[XDQ][HL][234]
X Hexidecimal radix
D Decimal radix
Q Octal radix
H Most significant byte first
L Least significant byte first
2 16-Bit Addressing
3 24-Bit Addressing
4 32-Bit Addressing
H Header
M Module
A Area
S Symbol
T Object code
R Relocation information
P Paging information
Refer to the linker for a detailed description of each of the
designators and the format of the information contained in the
object file.
CHAPTER 2
THE LINKER
2.1 ASLINK RELOCATING LINKER
ASLINK is the companion linker for the ASxxxx assemblers.
The program ASLINK is a general relocating linker performing
the following functions:
1. Bind multiple object modules into a single memory image
2. Resolve inter-module symbol references
3. Combine code belonging to the same area from multiple
object files into a single contiguous memory region
4. Search and import object module libraries for undefined
global variables
5. Perform byte and word program counter relative
(pc or pcr) addressing calculations
6. Define absolute symbol values at link time
7. Define absolute area base address values at link time
8. Produce Intel Hex or Motorola S output files
9. Produce a map of the linked memory image
10. Produce an updated listing file with the relocated ad-
dresses and data
THE LINKER PAGE 2-2
INVOKING ASLINK
2.2 INVOKING ASLINK
Most sytems require the options to be entered on the command
line:
aslink -[options] -[option arg] files
Some systems may request the arguments after the linker is
started at a system specific prompt:
aslink
argv: -[options] -[option arg] files
The allowed linker commands are:
1. -c ASlink >> prompt mode.
The ASlink >> prompt mode reads linker commands from
stdin.
2. -f file Command file mode.
The command file mode imports linker commands from the
specified file (extension must be .lnk), imported -c
and -f commands are ignored. If the directory path,
for a file to be linked, is not specified in the com-
mand file then the path defaults to the .lnk file
directory path.
3. -p/-n enable/disable echoing commands to stdout.
4. -i/-s Intel Hex (file.i--) or Motorola S (file.s--)
image output file.
5. -o/-v Specifies that subsequent linked
files/libraries will generate object output (default)
or suppress object output. (if option -s or -i was
specified)
6. -z Specifies that symbol names are case sensitive.
7. -m Generate a map file (file.map). This file con-
tains a list of the symbols (by area) with absolute ad-
dresses, sizes of linked areas, and other linking
information.
8. -w Specifies that a wide listing format be used
for the map file.
9. -xdq Specifies the number radix for the map file
(Hexidecimal, Decimal, or Octal).
THE LINKER PAGE 2-3
INVOKING ASLINK
10. -u Generate an updated listing file (file.rst)
derived from the relocated addresses and data from the
linker.
11. file File(s) to be linked. Files may be on the same
line as the above options or on a separate line(s) one
file per line or multiple files separated by spaces or
tabs.
12. -b area=expression (one definition per line)
This specifies an area base address where the expres-
sion may contain constants and/or defined symbols from
the linked files.
13. -g symbol=expression (one definition per line)
This specifies the value for the symbol where the ex-
pression may contain constants and/or defined symbols
from the linked files.
14. -k library directory path
(one definition per line) This specifies one possible
path to an object library. More than one path is al-
lowed.
15. -l library file specification
(one definition per line) This specifies a possible
library file. More than one file is allowed.
16. -e or null line, terminates input to the linker.
2.3 LIBRARY PATH(S) AND FILE(S)
The process of resolving undefined symbols after scanning the
input object files includes the scanning of object module
libraries. The linker will search through all combinations of
the library path specifications (input by the -k option) and the
library file specifications (input by the -l option) that lead
to an existing library file. Each library file contains a list
(one file per line) of modules included in this particular
library. Each existing object module is scanned for a match to
the undefined symbol. The first module containing the symbol is
then linked with the previous modules to resolve the symbol de-
finition. The library object modules are rescanned until no
more symbols can be resolved. The scanning algorithm allows
resolution of back references. No errors are reported for non
existant library files or object modules.
The library file specification may be formed in one of two
ways:
THE LINKER PAGE 2-4
LIBRARY PATH(S) AND FILE(S)
1. If the library file contained an absolute path/file
specification then this is the object module's
path/file.
(i.e. C:\... or C:/...)
2. If the library file contains a relative path/file
specification then the concatenation of the path and
this file specification becomes the object module's
path/file.
(i.e. \... or /...)
As an example, assume there exists a library file termio.lib
in the syslib directory specifying the following object modules:
\6809\io_disk first object module
d:\special\io_comm second object module
and the following parameters were specified to the linker:
-k c:\iosystem\ the first path
-k c:\syslib\ the second path
-l termio the first library file
-l io the second library file (no such file)
The linker will attempt to use the following object modules to
resolve any undefined symbols:
c:\syslib\6809\io_disk.rel (concatenated path/file)
d:\special\io_comm.rel (absolute path/file)
all other path(s)/file(s) don't exist. (No errors are reported
for non existant path(s)/file(s).)
2.4 ASLINK PROCESSING
The linker processes the files in the order they are
presented. The first pass through the input files is used to
define all program areas, the section area sizes, and symbols
defined or referenced. Undefined symbols will initiate a search
of any specified library file(s) and the importing of the module
containing the symbol definition. After the first pass the -b
(area base address) definitions, if any, are processed and the
areas linked.
The area linking proceeds by first examining the area types
ABS, CON, REL, OVR and PAG. Absolute areas (ABS) from separate
object modules are always overlayed and have been assembled at a
specific address, these are not normally relocated (if a -b
THE LINKER PAGE 2-5
ASLINK PROCESSING
command is used on an absolute area the area will be relocated).
Relative areas (normally defined as REL|CON) have a base address
of 0x0000 as read from the object files, the -b command speci-
fies the beginning address of the area. All subsequent relative
areas will be concatenated with proceeding relative areas.
Where specific ordering is desired, the first linker input file
should have the area definitions in the desired order. At the
completion of the area linking all area addresses and lengths
have been determined. The areas of type PAG are verified to be
on a 256 byte boundary and that the length does not exceed 256
bytes. Any errors are noted on stderr and in the map file.
Next the global symbol definitions (-g option), if any, are
processed. The symbol definitions have been delayed until this
point because the absolute addresses of all internal symbols are
known and can be used in the expression calculations.
Before continuing with the linking process the symbol table
is scanned to determine if any symbols have been referenced but
not defined. Undefined symbols are listed on the stderr device.
if a .module directive was included in the assembled file the
module making the reference to this undefined variable will be
printed.
Constants defined as global in more than one module will be
flagged as multiple definitions if their values are not identi-
cal.
After the preceeding processes are complete the linker may
output a map file (-m option). This file provides the following
information:
1. Global symbol values and label absolute addresses
2. Defined areas and there lengths
3. Remaining undefined symbols
4. List of modules linked
5. List of library modules linked
6. List of -b and -g definitions
The final step of the linking process is performed during the
second pass of the input files. As the xxx.rel files are read
the code is relocated by substituting the physical addresses for
the referenced symbols and areas and may be output in Intel or
Motorola formats. The number of files linked and symbols
THE LINKER PAGE 2-6
ASLINK PROCESSING
defined/referenced is limited by the processor space available
to build the area/symbol lists. If the -u option is specified
then the listing files (file.lst) associated with the relocation
files (file.rel) are scanned and used to create a new file
(file.rst) which has all addresses and data relocated to their
final values.
The -o/-v options allow the simple creation of loadable or
overlay modules. Loadable and overlay modules normally need to
be linked with a main module(s) to resolve external symbols.
The -o/-v options can be used to enable object output for the
loadable or overlay module(s) and suppress the object code from
the linked main module(s). The -o/-v options can be applied
repeatedly to specify a single linked file, groups of files, or
libraries for object code inclusion or suppression.
2.5 LINKER INPUT FORMAT
The linkers' input object file is an ascii file containing
the information needed by the linker to bind multiple object
modules into a complete loadable memory image.
The object module contains the following designators:
[XDQ][HL][234]
X Hexidecimal radix
D Decimal radix
Q Octal radix
H Most significant byte first
L Least significant byte first
2 16-Bit Addressing
3 24-Bit Addressing
4 32-Bit Addressing
H Header
M Module
A Area
S Symbol
T Object code
R Relocation information
P Paging information
THE LINKER PAGE 2-7
LINKER INPUT FORMAT
2.5.1 Object Module Format
The first line of an object module contains the
[XDQ][HL][234] format specifier (i.e. XH2 indicates a hex-
idecimal file with most significant byte first and 16-bit ad-
dressing) for the following designators.
2.5.2 Header Line
H aa areas gg global symbols
The header line specifies the number of areas(aa) and the
number of global symbols(gg) defined or referenced in this ob-
ject module segment.
2.5.3 Module Line
M name
The module line specifies the module name from which this
header segment was assembled. The module line will not appear
if the .module directive was not used in the source program.
2.5.4 Symbol Line
S string Defnnnn
or
S string Refnnnn
The symbol line defines (Def) or references (Ref) the symbol
'string' with the value nnnn. The defined value is relative to
the current area base address. References to constants and ex-
ternal global symbols will always appear before the first area
definition. References to external symbols will have a value of
zero.
THE LINKER PAGE 2-8
LINKER INPUT FORMAT
2.5.5 Area Line
A label size ss flags ff
The area line defines the area label, the size (ss) of the
area in bytes, and the area flags (ff). The area flags specify
the ABS, REL, CON, OVR, and PAG parameters:
OVR/CON (0x04/0x00 i.e. bit position 2)
ABS/REL (0x08/0x00 i.e. bit position 3)
PAG (0x10 i.e. bit position 4)
2.5.6 T Line
T xx xx nn nn nn nn nn ...
The T line contains the assembled code output by the assem-
bler with xx xx being the offset address from the current area
base address and nn being the assembled instructions and data in
byte format.
2.5.7 R Line
R 0 0 nn nn n1 n2 xx xx ...
The R line provides the relocation information to the linker.
The nn nn value is the current area index, i.e. which area the
current values were assembled. Relocation information is en-
coded in groups of 4 bytes:
1. n1 is the relocation mode and object format, for the
adhoc extension modes refer to asxxxx.h or aslink.h
1. bit 0 word(0x00)/byte(0x01)
2. bit 1 relocatable area(0x00)/symbol(0x02)
3. bit 2 normal(0x00)/PC relative(0x04) relocation
4. bit 3 1-byte(0x00)/2-byte(0x08) object format for
byte data
5. bit 4 signed(0x00)/unsigned(0x10) byte data
6. bit 5 normal(0x00)/page '0'(0x20) reference
7. bit 6 normal(0x00)/page 'nnn'(0x40) reference
8. bit 7 LSB byte(0x00)/2nd byte(0x80) with 2-byte
mode
2. n2 is a byte index into the corresponding (i.e. pre-
ceeding) T line data (i.e. a pointer to the data to be
updated by the relocation). The T line data may be
1-byte or 2-byte byte data format or 2-byte word
format.
THE LINKER PAGE 2-9
LINKER INPUT FORMAT
3. xx xx is the area/symbol index for the area/symbol be-
ing referenced. the corresponding area/symbol is found
in the header area/symbol lists.
The groups of 4 bytes are repeated for each item requiring relo-
cation in the preceeding T line.
2.5.8 P Line
P 0 0 nn nn n1 n2 xx xx
The P line provides the paging information to the linker as
specified by a .setdp directive. The format of the relocation
information is identical to that of the R line. The correspond-
ing T line has the following information:
T xx xx aa aa bb bb
Where aa aa is the area reference number which specifies the
selected page area and bb bb is the base address of the page.
bb bb will require relocation processing if the 'n1 n2 xx xx' is
specified in the P line. The linker will verify that the base
address is on a 256 byte boundary and that the page length of an
area defined with the PAG type is not larger than 256 bytes.
The linker defaults any direct page references to the first
area defined in the input REL file. All ASxxxx assemblers will
specify the _CODE area first, making this the default page area.
2.5.9 24-Bit and 32-Bit Addressing
When 24-bit or 32-bit addressing is specified in the file
format line [XDQ][HL][234] then the S and T Lines have modified
formats:
S string Defnnnnnn (24-bit)
S string Refnnnnnn (24-bit)
T xx xx xx nn nn nn nn nn ... (24-bit)
S string Defnnnnnnnn (32-bit)
S string Refnnnnnnnn (32-bit)
T xx xx xx xx nn nn nn nn nn ... (32-bit)
The multibyte formats for byte data replace the 2-byte form
for 16-bit data with 3-byte or 4-byte data for 24-bit or 32-bit
data respectively. The 2nd byte format (also named MSB) always
uses the second byte of the 2, 3, or 4-byte data.
THE LINKER PAGE 2-10
LINKER ERROR MESSAGES
2.6 LINKER ERROR MESSAGES
The linker provides detailed error messages allowing the pro-
grammer to quickly find the errant code. As the linker com-
pletes pass 1 over the input file(s) it reports any page
boundary or page length errors as follows:
?ASlink-Warning-Paged Area PAGE0 Boundary Error
and/or
?ASlink-Warning-Paged Area PAGE0 Length Error
where PAGE0 is the paged area.
During Pass two the linker reads the T, R, and P lines per-
forming the necessary relocations and outputting the absolute
code. Various errors may be reported during this process
The P line processing can produce only one possible error:
?ASlink-Warning-Page Definition Boundary Error
file module pgarea pgoffset
PgDef t6809l t6809l PAGE0 0001
The error message specifies the file and module where the .setdp
direct was issued and indicates the page area and the page
offset value determined after relocation.
The R line processing produces various errors:
?ASlink-Warning-Byte PCR relocation error for symbol bra2
file module area offset
Refby t6809l t6809l TEST 00FE
Defin tconst tconst . .ABS. 0080
?ASlink-Warning-Unsigned Byte error for symbol two56
file module area offset
Refby t6800l t6800l DIRECT 0015
Defin tconst tconst . .ABS. 0100
?ASlink-Warning-Page0 relocation error for symbol ltwo56
file module area offset
Refby t6800l t6800l DIRECT 000D
Defin tconst tconst DIRECT 0100
?ASlink-Warning-Page Mode relocation error for symbol two56
file module area offset
Refby t6809l t6809l DIRECT 0005
Defin tconst tconst . .ABS. 0100
THE LINKER PAGE 2-11
LINKER ERROR MESSAGES
?ASlink-Warning-Page Mode relocation error
file module area offset
Refby t Pagetest PROGRAM 0006
Defin t Pagetest DIRECT 0100
?ASlink-Warning-2K Page relocation error
file module area offset
Refby t Pagetest A 0000
Defin t Pagetest A 0800
?ASlink-Warning-512K Page relocation error
file module area offset
Refby t Pagetest A 000000
Defin t Pagetest A 080000
These error messages specify the file, module, area, and offset
within the area of the code referencing (Refby) and defining
(Defin) the symbol. If the symbol is defined in the same module
as the reference the linker is unable to report the symbol name.
The assembler listing file(s) should be examined at the offset
from the specified area to locate the offending code.
The errors are:
1. The byte PCR error is caused by exceeding the pc rela-
tive byte branch range.
2. The Unsigned byte error indicates an indexing value was
negative or larger than 255.
3. The Page0 error is generated if the direct page vari-
able is not in the page0 range of 0 to 255.
4. The page mode error is generated if the direct variable
is not within the current direct page (6809).
5. The 2K Page relocation error is generated if the
destination is not within the current 2K page (8051,
DS8xCxxx).
6. The 512K Page relocation error is generated if the
destination is not within the current 512K page
(DS80C390).
THE LINKER Page 2-12
INTEL IHX OUTPUT FORMAT
2.7 INTEL IHX OUTPUT FORMAT (16-BIT)
Record Mark Field - This field signifies the start of a
record, and consists of an ascii colon
(:).
Record Length Field - This field consists of two ascii
characters which indicate the number of
data bytes in this record. The
characters are the result of converting
the number of bytes in binary to two
ascii characters, high digit first. An
End of File record contains two ascii
zeros in this field.
Load Address Field - This field consists of the four ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
order is as follows:
High digit of high byte of address.
Low digit of high byte of address.
High digit of low byte of address.
Low digit of low byte of address.
In an End of File record this field con-
sists of either four ascii zeros or the
program entry address. Currently the
entry address option is not supported.
Record Type Field - This field identifies the record type,
which is either 0 for data records or 1
for an End of File record. It consists
of two ascii characters, with the high
digit of the record type first, followed
by the low digit of the record type.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, the record type field,
and the data field. This sum is then
negated (2's complement) and converted
to two ascii characters, high digit
first.
THE LINKER Page 2-13
INTEL I86 OUTPUT FORMAT
2.8 INTEL I86 OUTPUT FORMAT (24 OR 32-BIT)
Record Mark Field - This field signifies the start of a
record, and consists of an ascii colon
(:).
Record Length Field - This field consists of two ascii
characters which indicate the number of
data bytes in this record. The
characters are the result of converting
the number of bytes in binary to two
ascii characters, high digit first. An
End of File record contains two ascii
zeros in this field.
Load Address Field - This field consists of the four ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
order is as follows:
High digit of high byte of address.
Low digit of high byte of address.
High digit of low byte of address.
Low digit of low byte of address.
In an End of File record this field con-
sists of either four ascii zeros or the
program entry address. Currently the
entry address option is not supported.
Record Type Field - This field identifies the record type,
which is either 0 for data records, 1
for an End of File record, or 4 for a
segment record. It consists of two
ascii characters, with the high digit of
the record type first, followed by the
low digit of the record type.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, the record type field,
and the data field. This sum is then
negated (2's complement) and converted
to two ascii characters, high digit
first.
THE LINKER Page 2-14
MOTOROLA S1-S9 OUTPUT FORMAT
2.9 MOTORLA S1-S9 OUTPUT FORMAT (16-BIT)
Record Type Field - This field signifies the start of a
record and identifies the the record
type as follows:
Ascii S1 - Data Record
Ascii S9 - End of File Record
Record Length Field - This field specifies the record length
which includes the address, data, and
checksum fields. The 8 bit record
length value is converted to two ascii
characters, high digit first.
Load Address Field - This field consists of the four ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
order is as follows:
High digit of high byte of address.
Low digit of high byte of address.
High digit of low byte of address.
Low digit of low byte of address.
In an End of File record this field con-
sists of either four ascii zeros or the
program entry address. Currently the
entry address option is not supported.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, and the data field. This
sum is then complemented (1's comple-
ment) and converted to two ascii
characters, high digit first.
THE LINKER Page 2-15
MOTOROLA S2-S8 OUTPUT FORMAT
2.10 MOTORLA S2-S8 OUTPUT FORMAT (24-BIT)
Record Type Field - This field signifies the start of a
record and identifies the the record
type as follows:
Ascii S2 - Data Record
Ascii S8 - End of File Record
Record Length Field - This field specifies the record length
which includes the address, data, and
checksum fields. The 8 bit record
length value is converted to two ascii
characters, high digit first.
Load Address Field - This field consists of the six ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
order is as follows:
High digit of 3rd byte of address.
Low digit of 3rd byte of address.
High digit of high byte of address.
Low digit of high byte of address.
High digit of low byte of address.
Low digit of low byte of address.
In an End of File record this field con-
sists of either six ascii zeros or the
program entry address. Currently the
entry address option is not supported.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, and the data field. This
sum is then complemented (1's comple-
ment) and converted to two ascii
characters, high digit first.
THE LINKER Page 2-16
MOTOROLA S3-S7 OUTPUT FORMAT
2.11 MOTORLA S3-S7 OUTPUT FORMAT (32-BIT)
Record Type Field - This field signifies the start of a
record and identifies the the record
type as follows:
Ascii S3 - Data Record
Ascii S7 - End of File Record
Record Length Field - This field specifies the record length
which includes the address, data, and
checksum fields. The 8 bit record
length value is converted to two ascii
characters, high digit first.
Load Address Field - This field consists of the eight ascii
characters which result from converting
the the binary value of the address in
which to begin loading this record. The
order is as follows:
High digit of 4th byte of address.
Low digit of 4th byte of address.
High digit of 3rd byte of address.
Low digit of 3rd byte of address.
High digit of high byte of address.
Low digit of high byte of address.
High digit of low byte of address.
Low digit of low byte of address.
In an End of File record this field con-
sists of either eight ascii zeros or the
program entry address. Currently the
entry address option is not supported.
Data Field - This field consists of the actual data,
converted to two ascii characters, high
digit first. There are no data bytes in
the End of File record.
Checksum Field - The checksum field is the 8 bit binary
sum of the record length field, the load
address field, and the data field. This
sum is then complemented (1's comple-
ment) and converted to two ascii
characters, high digit first.
CHAPTER 3
BUILDING ASXXXX AND ASLINK
The assemblers and linker have been successfully compiled us-
ing GCC 2.7.2 with Linux, Symantec C/C++ V6.1/V7.2, DJGPP (GCC
2.8.2) and VC6 with MS-DOS and Windows 3.x/95/98. A Linux
makefile, DJGPP makefile, Symantec project files, and VC6 pro-
ject files are available to build all the assemblers and the
linker.
3.1 BUILDING AN ASSEMBLER
The building of a typical assembler (6809 for example) re-
quires the following files:
1. m6809.h
2. m09ext.c
3. m09mch.c
4. m09adr.c
5. m09pst.c
6. asxxxx.h
7. asmain.c
8. aslex.c
9. assym.c
10. assubr.c
11. asexpr.c
12. asdata.c
13. aslist.c
14. asout.c
The first five files are the 6809 processor dependent sec-
tions which contain the following:
1. m6809.h - header file containing the machine specific
definitions of constants, variables, structures, and
types
BUILDING ASXXXX AND ASLINK PAGE 3-2
BUILDING AN ASSEMBLER
2. m09ext - device description, byte order, and file ex-
tension information
3. m09pst - a table of the assembler general directives,
special device directives, and assembler mnemonics with
associated operation codes
4. m09mch / m09adr - machine specific code for processing
the device mnemonics, addressing modes, and special
directives
The remaining nine files provide the device independent sec-
tions which handle the details of file input/output, symbol
table generation, program/data areas, expression analysis, and
assembler directive processing.
3.2 BUILDING ASLINK
The building of the linker requires the following files:
1. aslink.h
2. lkmain.c
3. lklex.c
4. lkarea.c
5. lkhead.c
6. lksym.c
7. lkeval.c
8. lkdata.c
9. lklist.c
10. lkrloc.c
11. lklibr.c
12. lks19.c
13. lkihx.c
APPENDIX A
AS6800 ASSEMBLER
A.1 6800 REGISTER SET
The following is a list of the 6800 registers used by AS6800:
a,b - 8-bit accumulators
x - index register
A.2 6800 INSTRUCTION SET
The following tables list all 6800/6802/6808 mnemonics recog-
nized by the AS6800 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
the format for each addressing mode supported by AS6800:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
,x register indirect addressing
zero offset
offset,x register indirect addressing
0 <= offset <= 255
ext extended addressing
label branch label
The terms data, dir, offset, ext, and label may all be expres-
sions.
AS6800 ASSEMBLER PAGE A-2
6800 INSTRUCTION SET
Note that not all addressing modes are valid with every in-
struction, refer to the 6800 technical data for valid modes.
A.2.1 Inherent Instructions
aba cba
clc cli
clv daa
des dex
ins inx
nop rti
rts sba
sec sei
sev swi
tab tap
tba tpa
tsx txs
wai
psha pshb
psh a psh b
pula pulb
pul a pul b
A.2.2 Branch Instructions
bra label bhi label
bls label bcc label
bhs label bcs label
blo label bne label
beq label bvc label
bvs label bpl label
bmi label bge label
blt label bgt label
ble label bsr label
AS6800 ASSEMBLER PAGE A-3
6800 INSTRUCTION SET
A.2.3 Single Operand Instructions
asla aslb
asl a asl b
asl []
asra asrb
asr a asr b
asr []
clra clrb
clr a clr b
clr []
coma comb
com a com b
com []
deca decb
dec a dec b
dec []
inca incb
inc a inc b
inc []
lsla lslb
lsl a lsl b
lsl []
lsra lsrb
lsr a lsr b
lsr []
nega negb
neg a neg b
neg []
rola rolb
rol a rol b
rol []
rora rorb
ror a ror b
ror []
tsta tstb
tst a tst b
tst []
AS6800 ASSEMBLER PAGE A-4
6800 INSTRUCTION SET
A.2.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
adda [] addb []
add a [] add b []
anda [] andb []
and a [] and b []
bita [] bitb []
bit a [] bit b []
cmpa [] cmpb []
cmp a [] cmp b []
eora [] eorb []
eor a [] eor b []
ldaa [] ldab []
lda a [] lda b []
oraa [] orab []
ora a [] ora b []
sbca [] sbcb []
sbc a [] sbc b []
staa [] stab []
sta a [] sta b []
suba [] subb []
sub a [] sub b []
A.2.5 Jump and Jump to Subroutine Instructions
jmp [] jsr []
AS6800 ASSEMBLER PAGE A-5
6800 INSTRUCTION SET
A.2.6 Long Register Instructions
cpx []
lds [] sts []
ldx [] stx []
APPENDIX B
AS6801 ASSEMBLER
B.1 .hd6303 DIRECTIVE
Format:
.hd6303
The .hd6303 directive enables processing of the HD6303 specific
mnemonics not included in the 6801 instruction set. HD6303
mnemonics encountered without the .hd6303 directive will be
flagged with an 'o' error.
B.2 6801 REGISTER SET
The following is a list of the 6801 registers used by AS6801:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x - index register
B.3 6801 INSTRUCTION SET
The following tables list all 6801/6303 mnemonics recognized
by the AS6801 assembler. The designation [] refers to a re-
quired addressing mode argument. The following list specifies
the format for each addressing mode supported by AS6801:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
AS6801 ASSEMBLER PAGE B-2
6801 INSTRUCTION SET
,x register indirect addressing
zero offset
offset,x register indirect addressing
0 <= offset <= 255
ext extended addressing
label branch label
The terms data, dir, offset, ext, and label may all be expres-
sions.
Note that not all addressing modes are valid with every in-
struction, refer to the 6801/6303 technical data for valid
modes.
B.3.1 Inherent Instructions
aba abx
cba clc
cli clv
daa des
dex ins
inx mul
nop rti
rts sba
sec sei
sev swi
tab tap
tba tpa
tsx txs
wai
B.3.2 Branch Instructions
bra label brn label
bhi label bls label
bcc label bhs label
bcs label blo label
bne label beq label
bvc label bvs label
bpl label bmi label
bge label blt label
bgt label ble label
bsr label
AS6801 ASSEMBLER PAGE B-3
6801 INSTRUCTION SET
B.3.3 Single Operand Instructions
asla aslb asld
asl a asl b asl d
asl []
asra asrb
asr a asr b
asr []
clra clrb
clr a clr b
clr []
coma comb
com a com b
com []
deca decb
dec a dec b
dec []
eora eorb
eor a eor b
eor []
inca incb
inc a inc b
inc []
lsla lslb lsld
lsl a lsl b lsl d
lsl []
lsra lsrb lsrd
lsr a lsr b lsr d
lsr []
nega negb
neg a neg b
neg []
psha pshb pshx
psh a psh b psh x
pula pulb pulx
pul a pul b pul x
rola rolb
rol a rol b
rol []
AS6801 ASSEMBLER PAGE B-4
6801 INSTRUCTION SET
rora rorb
ror a ror b
ror []
tsta tstb
tst a tst b
tst []
B.3.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
adda [] addb [] addd []
add a [] add b [] add d []
anda [] andb []
and a [] and b []
bita [] bitb []
bit a [] bit b []
cmpa [] cmpb []
cmp a [] cmp b []
ldaa [] ldab []
lda a [] lda b []
oraa [] orab []
ora a [] ora b []
sbca [] sbcb []
sbc a [] sbc b []
staa [] stab []
sta a [] sta b []
suba [] subb [] subd []
sub a [] sub b [] sub d []
AS6801 ASSEMBLER PAGE B-5
6801 INSTRUCTION SET
B.3.5 Jump and Jump to Subroutine Instructions
jmp [] jsr []
B.3.6 Long Register Instructions
cpx [] ldd []
lds [] ldx []
std [] sts []
stx []
B.3.7 6303 Specific Instructions
aim #data, [] eim #data, []
oim #data, [] tim #data, []
xgdx slp
APPENDIX C
AS6804 ASSEMBLER
Requires the .setdp directive to specify the ram area.
C.1 6804 REGISTER SET
The following is a list of the 6804 registers used by AS6804:
x,y - index registers
C.2 6804 INSTRUCTION SET
The following tables list all 6804 mnemonics recognized by
the AS6804 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6804:
#data immediate data
byte or word data
,x register indirect addressing
dir direct addressing
(see .setdp directive)
0 <= dir <= 255
ext extended addressing
label branch label
The terms data, dir, and ext may be expressions. The label for
the short branchs beq, bne, bcc, and bcs must not be external.
Note that not all addressing modes are valid with every in-
struction, refer to the 6804 technical data for valid modes.
AS6804 ASSEMBLER PAGE C-2
6804 INSTRUCTION SET
C.2.1 Inherent Instructions
coma decx
decy incx
incy rola
rti rts
stop tax
tay txa
tya wait
C.2.2 Branch Instructions
bne label beq label
bcc label bcs label
C.2.3 Single Operand Instructions
add []
and []
cmp []
dec []
inc []
lda []
sta []
sub []
C.2.4 Jump and Jump to Subroutine Instructions
jsr []
jmp []
C.2.5 Bit Test Instructions
brclr #data,[],label
brset #data,[],label
bclr #label,[]
bset #label,[]
AS6804 ASSEMBLER PAGE C-3
6804 INSTRUCTION SET
C.2.6 Load Immediate data Instruction
mvi [],#data
C.2.7 6804 Derived Instructions
asla
bam label
bap label
bxmi label
bxpl label
bymi label
bypl label
clra
clrx
clry
deca
decx
decy
inca
incx
incy
ldxi #data
ldyi #data
nop
tax
tay
txa
tya
APPENDIX D
AS6805 ASSEMBLER
D.1 6805 REGISTER SET
The following is a list of the 6805 registers used by AS6805:
a - 8-bit accumulator
x - index register
D.2 6805 INSTRUCTION SET
The following tables list all 6805 mnemonics recognized by
the AS6805 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6805:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
,x register indirect addressing
zero offset
offset,x register indirect addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
ext extended addressing
label branch label
AS6805 ASSEMBLER PAGE D-2
6805 INSTRUCTION SET
The terms data, dir, offset, and ext may all be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 6805 technical data for valid modes.
D.2.1 Control Instructions
clc cli
nop rsp
rti rts
sec sei
stop swi
tax txa
wait
D.2.2 Bit Manipulation Instructions
brset #data,*dir,label
brclr #data,*dir,label
bset #data,*dir
bclr #data,*dir
D.2.3 Branch Instructions
bra label brn label
bhi label bls label
bcc label bcs label
bne label beq label
bhcc label bhcs label
bpl label bmi label
bmc label bms label
bil label bih label
bsr label
AS6805 ASSEMBLER PAGE D-3
6805 INSTRUCTION SET
D.2.4 Read-Modify-Write Instructions
nega negx
neg []
coma comx
com []
lsra lsrx
lsr []
rora rorx
ror []
asra asrx
asr []
lsla lslx
lsl []
rola rolx
rol []
deca decx
dec []
inca incx
inc []
tsta tstx
tst []
clra clrx
clr []
D.2.5 Register\Memory Instructions
sub [] cmp []
sbc [] cpx []
and [] bit []
lda [] sta []
eor [] adc []
ora [] add []
ldx [] stx []
AS6805 ASSEMBLER PAGE D-4
6805 INSTRUCTION SET
D.2.6 Jump and Jump to Subroutine Instructions
jmp [] jsr []
APPENDIX E
AS6808 ASSEMBLER
E.1 68HC08 REGISTER SET
The following is a list of the 68HC08 registers used by
AS68HC08:
a - 8-bit accumulator
x - index register <H:X>
s - stack pointer
E.2 68HC08 INSTRUCTION SET
The following tables list all 68HC08 mnemonics recognized by
the AS6808 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6808:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
,x register indexed addressing
zero offset
offset,x register indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
,x+ register indexed addressing
zero offset with post increment
AS6808 ASSEMBLER PAGE E-2
68HC08 INSTRUCTION SET
offset,x+ register indexed addressing
unsigned byte offset with post increment
offset,s stack pointer indexed addressing
0 <= offset <= 255 --- byte mode
256 <= offset <= 65535 --- word mode
(an externally defined offset uses the
word mode)
ext extended addressing
label branch label
The terms data, dir, offset, and ext may all be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 68HC08 technical data for valid modes.
E.2.1 Control Instructions
clc cli daa div
mul nop nsa psha
pshh pshx pula pulh
pulx rsp rti rts
sec sei stop swi
tap tax tpa tsx
txa txs wait
E.2.2 Bit Manipulation Instructions
brset #data,*dir,label
brclr #data,*dir,label
bset #data,*dir
bclr #data,*dir
AS6808 ASSEMBLER PAGE E-3
68HC08 INSTRUCTION SET
E.2.3 Branch Instructions
bra label brn label
bhi label bls label
bcc label bcs label
bne label beq label
bhcc label bhcs label
bpl label bmi label
bmc label bms label
bil label bih label
bsr label bge label
blt label bgt label
ble label
E.2.4 Complex Branch Instructions
cbeqa [],label
cbeqx [],label
cbeq [],label
dbnza label
dbnzx label
dbnz [],label
AS6808 ASSEMBLER PAGE E-4
68HC08 INSTRUCTION SET
E.2.5 Read-Modify-Write Instructions
nega negx
neg []
coma comx
com []
lsra lsrx
lsr []
rora rorx
ror []
asra asrx
asr []
asla aslx
asl []
lsla lslx
lsl []
rola rolx
rol []
deca decx
dec []
inca incx
inc []
tsta tstx
tst []
clra clrx
clr [] clrh
aix #data
ais #data
AS6808 ASSEMBLER PAGE E-5
68HC08 INSTRUCTION SET
E.2.6 Register\Memory Instructions
sub [] cmp []
sbc [] cpx []
and [] bit []
lda [] sta []
eor [] adc []
ora [] add []
ldx [] stx []
E.2.7 Double Operand Move Instruction
mov [],[]
E.2.8 16-Bit <H:X> Index Register Instructions
cphx []
ldhx []
sthx []
E.2.9 Jump and Jump to Subroutine Instructions
jmp [] jsr []
APPENDIX F
AS6809 ASSEMBLER
F.1 6809 REGISTER SET
The following is a list of the 6809 registers used by AS6809:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x,y - index registers
s,u - stack pointers
pc - program counter
cc - condition code
dp - direct page
F.2 6809 INSTRUCTION SET
The following tables list all 6809 mnemonics recognized by
the AS6809 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6809:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
label branch label
r,r1,r2 registers
cc,a,b,d,dp,x,y,s,u,pc
,-x ,--x register indexed
autodecrement
AS6809 ASSEMBLER PAGE F-2
6809 INSTRUCTION SET
,x+ ,x++ register indexed
autoincrement
,x register indexed addressing
zero offset
offset,x register indexed addressing
-16 <= offset <= 15 --- 5-bit
-128 <= offset <= -17 --- 8-bit
16 <= offset <= 127 --- 8-bit
-32768 <= offset <= -129 --- 16-bit
128 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
a,x accumulator offset indexed addressing
ext extended addressing
ext,pc pc addressing ( pc <- pc + ext )
ext,pcr pc relative addressing
[,--x] register indexed indirect
autodecrement
[,x++] register indexed indirect
autoincrement
[,x] register indexed indirect addressing
zero offset
[offset,x] register indexed indirect addressing
-128 <= offset <= 127 --- 8-bit
-32768 <= offset <= -129 --- 16-bit
128 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
[a,x] accumulator offset indexed
indirect addressing
[ext] extended indirect addressing
[ext,pc] pc indirect addressing
( [pc <- pc + ext] )
[ext,pcr] pc relative indirect addressing
The terms data, dir, label, offset, and ext may all be expres-
sions.
AS6809 ASSEMBLER PAGE F-3
6809 INSTRUCTION SET
Note that not all addressing modes are valid with every in-
struction, refer to the 6809 technical data for valid modes.
F.2.1 Inherent Instructions
abx daa
mul nop
rti rts
sex swi
swi1 swi2
swi3 sync
F.2.2 Short Branch Instructions
bcc label bcs label
beq label bge label
bgt label bhi label
bhis label bhs label
ble label blo label
blos label bls label
blt label bmi label
bne label bpl label
bra label brn label
bvc label bvs label
bsr label
F.2.3 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
lbgt label lbhi label
lbhis label lbhs label
lble label lblo label
lblos label lbls label
lblt label lbmi label
lbne label lbpl label
lbra label lbrn label
lbvc label lbvs label
lbsr label
AS6809 ASSEMBLER PAGE F-4
6809 INSTRUCTION SET
F.2.4 Single Operand Instructions
asla aslb
asl []
asra asrb
asr []
clra clrb
clr []
coma comb
com []
deca decb
dec []
inca incb
inc []
lsla lslb
lsl []
lsra lsrb
lsr []
nega negb
neg []
rola rolb
rol []
rora rorb
ror []
tsta tstb
tst []
AS6809 ASSEMBLER PAGE F-5
6809 INSTRUCTION SET
F.2.5 Double Operand Instructions
adca [] adcb []
adda [] addb []
anda [] andb []
bita [] bitb []
cmpa [] cmpb []
eora [] eorb []
lda [] ldb []
ora [] orb []
sbca [] sbcb []
sta [] stb []
suba [] subb []
F.2.6 D-register Instructions
addd [] subd []
cmpd [] ldd []
std []
F.2.7 Index/Stack Register Instructions
cmps [] cmpu []
cmpx [] cmpy []
lds [] ldu []
ldx [] ldy []
leas [] leau []
leax [] leay []
sts [] stu []
stx [] sty []
pshs r pshu r
puls r pulu r
AS6809 ASSEMBLER PAGE F-6
6809 INSTRUCTION SET
F.2.8 Jump and Jump to Subroutine Instructions
jmp [] jsr []
F.2.9 Register - Register Instructions
exg r1,r2 tfr r1,r2
F.2.10 Condition Code Register Instructions
andcc #data orcc #data
cwai #data
F.2.11 6800 Compatibility Instructions
aba cba
clc cli
clv des
dex ins
inx
ldaa [] ldab []
oraa [] orab []
psha pshb
pula pulb
sba sec
sei sev
staa [] stab []
tab tap
tba tpa
tsx txs
wai
APPENDIX G
AS6811 ASSEMBLER
G.1 68HC11 REGISTER SET
The following is a list of the 68HC11 registers used by AS6811:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x,y - index registers
G.2 68HC11 INSTRUCTION SET
The following tables list all 68HC11 mnemonics recognized by
the AS6811 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6811:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
,x register indirect addressing
zero offset
offset,x register indirect addressing
0 <= offset <= 255
ext extended addressing
label branch label
The terms data, dir, offset, and ext may all be expressions.
AS6811 ASSEMBLER PAGE G-2
68HC11 INSTRUCTION SET
Note that not all addressing modes are valid with every in-
struction, refer to the 68HC11 technical data for valid modes.
G.2.1 Inherent Instructions
aba abx
aby cba
clc cli
clv daa
des dex
dey fdiv
idiv ins
inx iny
mul nop
rti rts
sba sec
sei sev
stop swi
tab tap
tba tpa
tsx txs
wai xgdx
xgdy
psha pshb
psh a psh b
pshx pshy
psh x psh y
pula pulb
pul a pul b
pulx puly
pul x pul y
G.2.2 Branch Instructions
bra label brn label
bhi label bls label
bcc label bhs label
bcs label blo label
bne label beq label
bvc label bvs label
bpl label bmi label
bge label blt label
bgt label ble label
bsr label
AS6811 ASSEMBLER PAGE G-3
68HC11 INSTRUCTION SET
G.2.3 Single Operand Instructions
asla aslb asld
asl a asl b asl d
asl []
asra asrb
asr a asr b
asr []
clra clrb
clr a clr b
clr label
coma comb
com a com b
com []
deca decb
dec a dec b
dec []
inca incb
inc a inc b
inc []
lsla lslb lsld
lsl a lsl b lsl d
lsl []
lsra lsrb lsrd
lsr a lsr b lsr d
lsr []
nega negb
neg a neg b
neg []
rola rolb
rol a rol b
rol []
rora rorb
ror a ror b
ror []
tsta tstb
tst a tst b
tst []
AS6811 ASSEMBLER PAGE G-4
68HC11 INSTRUCTION SET
G.2.4 Double Operand Instructions
adca [] adcb []
adc a [] adc b []
adda [] addb [] addd []
add a [] add b [] add d []
anda [] andb []
and a [] and b []
bita [] bitb []
bit a [] bit b []
cmpa [] cmpb []
cmp a [] cmp b []
eora [] eorb []
eor a [] eor b []
ldaa [] ldab []
lda a [] lda b []
oraa [] orab []
ora a [] ora b []
sbca [] sbcb []
sbc a [] sbc b []
staa [] stab []
sta a [] sta b []
suba [] subb [] subd []
sub a [] sub b [] sub d []
G.2.5 Bit Manupulation Instructions
bclr [],#data
bset [],#data
brclr [],#data,label
brset [],#data,label
AS6811 ASSEMBLER PAGE G-5
68HC11 INSTRUCTION SET
G.2.6 Jump and Jump to Subroutine Instructions
jmp [] jsr []
G.2.7 Long Register Instructions
cpx [] cpy []
ldd [] lds []
ldx [] ldy []
std [] sts []
stx [] sty []
APPENDIX H
AS6812 ASSEMBLER
H.1 68HC12 REGISTER SET
The following is a list of the 68HC12 registers used by AS6812:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
x,y - index registers
sp,s - stack pointer
pc - program counter
ccr,cc - condition code register
H.2 68HC12 INSTRUCTION SET
The following tables list all 68HC12 mnemonics recognized by
the AS6812 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6812:
#data immediate data
byte or word data
ext extended addressing
pg memory page number
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
label branch label
r,r1,r2 registers
ccr,a,b,d,x,y,sp,pc
AS6812 ASSEMBLER PAGE H-2
68HC12 INSTRUCTION SET
-x x- register indexed, pre or
,-x ,x- post autodecrement by 1
n,-x n,x- register indexed, pre or
post autodecrement by 1 - 8
+x x+ register indexed, pre or
,+x ,x+ post autoincrement by 1
n,+x n,x+ register indexed, pre or
post autoincrement by 1 - 8
offset,x register indexed addressing
-16 <= offset <= 15 --- 5-bit
-256 <= offset <= -17 --- 9-bit
16 <= offset <= 255 --- 9-bit
-32768 <= offset <= -257 --- 16-bit
256 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
[offset,x] register indexed indirect addressing
-32768 <= offset <= 32767 --- 16-bit
[,x] register indexed indirect addressing
zero offset
a,x accumulator offset indexed addressing
[d,x] d accumulator offset indexed
indirect addressing
The terms data, dir, label, offset, and ext may all be expres-
sions.
Note that not all addressing modes are valid with every in-
struction, refer to the 68HC12 technical data for valid modes.
AS6812 ASSEMBLER PAGE H-3
68HC12 INSTRUCTION SET
H.2.1 Inherent Instructions
aba bgnd cba
daa dex dey
ediv edivs emul
emuls fdiv idiv
idivs inx iny
mem mul nop
psha pshb pshc
pshd pshx pshy
pula pulb pulc
puld pulx puly
rev revw rtc
rti rts sba
stop swi tab
tba wai wav
wavr
H.2.2 Short Branch Instructions
bcc label bcs label
beq label bge label
bgt label bhi label
bhis label bhs label
ble label blo label
blos label bls label
blt label bmi label
bne label bpl label
bra label brn label
bvc label bvs label
bsr label
H.2.3 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
lbgt label lbhi label
lbhis label lbhs label
lble label lblo label
lblos label lbls label
lblt label lbmi label
lbne label lbpl label
lbra label lbrn label
lbvc label lbvs label
AS6812 ASSEMBLER PAGE H-4
68HC12 INSTRUCTION SET
H.2.4 Branch on Decrement, Test, or Increment
dbeq r,label dbne r,label
ibeq r,label ibne r,label
tbeq r,label tbne r,label
H.2.5 Bit Clear and Set Instructions
bclr [],#data
bset [],#data
H.2.6 Branch on Bit Clear or Set
brclr [],#data,label
brset [],#data,label
AS6812 ASSEMBLER PAGE H-5
68HC12 INSTRUCTION SET
H.2.7 Single Operand Instructions
asla aslb
asl []
asra asrb
asr []
clra clrb
clr []
coma comb
com []
deca decb
dec []
inca incb
inc []
lsla lslb
lsl []
lsra lsrb
lsr []
nega negb
neg []
rola rolb
rol []
rora rorb
ror []
tsta tstb
tst []
AS6812 ASSEMBLER PAGE H-6
68HC12 INSTRUCTION SET
H.2.8 Double Operand Instructions
adca [] adcb []
adda [] addb []
anda [] andb []
bita [] bitb []
cmpa [] cmpb []
eora [] eorb []
ldaa [] <=> lda []
ldab [] <=> ldb []
oraa [] <=> ora []
orab [] <=> orb []
sbca [] sbcb []
staa [] <=> sta []
stab [] <=> stb []
suba [] subb []
H.2.9 Move Instructions
movb [],[] movw [],[]
H.2.10 D-register Instructions
addd [] subd []
cpd [] <=> cmpd []
ldd [] std []
AS6812 ASSEMBLER PAGE H-7
68HC12 INSTRUCTION SET
H.2.11 Index/Stack Register Instructions
cps [] <=> cmps []
cpx [] <=> cmpx []
cpy [] <=> cmpy []
lds []
ldx [] ldy []
leas []
leax [] leay []
sts []
stx [] sty []
H.2.12 Jump and Jump/Call to Subroutine Instructions
call [],pg
jmp [] jsr []
H.2.13 Other Special Instructions
emacs []
emaxd [] emaxm []
emind [] eminm []
etbl []
maxa [] maxm []
mina [] minm []
tbl [] trap #data
H.2.14 Register - Register Instructions
exg r1,r2 sex r1,r2
tfr r1,r2
H.2.15 Condition Code Register Instructions
andcc #data orcc #data
AS6812 ASSEMBLER PAGE H-8
68HC12 INSTRUCTION SET
H.2.16 M68HC11 Compatibility Mode Instructions
abx aby clc
cli clv des
ins sec sei
sev tap tpa
tsx tsy txs
tys xgdx xgdy
APPENDIX I
AS6816 ASSEMBLER
I.1 68HC16 REGISTER SET
The following is a list of the 68HC16 registers used by AS6816:
a,b - 8-bit accumulators
d - 16-bit accumulator <a:b>
e - 16-bit accumulator
x,y,z - index registers
k - address extension register
s - stack pointer
ccr - condition code
I.2 68HC16 INSTRUCTION SET
The following tables list all 68HC16 mnemonics recognized by
the AS6816 assembler. The designation [] refers to a required
addressing mode argument. The following list specifies the
format for each addressing mode supported by AS6816:
#data immediate data
byte or word data
#xo,#yo local immediate data (mac / rmac)
label branch label
r register
ccr,a,b,d,e,x,y,z,s
,x zero offset register indexed addressing
,x8
,x16
offset,x register indexed addressing
AS6816 ASSEMBLER PAGE I-2
68HC16 INSTRUCTION SET
0 <= offset <= 255 --- 8-bit
-32768 <= offset <= -1 --- 16-bit
256 <= offset <= 32767 --- 16-bit
(external definition of offset
uses 16-bit mode)
offset,x8 unsigned 8-bit offset indexed addressing
offset,x16 signed 16-bit offset indexed addressing
e,x accumulator offset indexed addressing
ext extended addressing
bank 64K bank number (jmp / jsr)
The terms data, label, offset, bank, and ext may all be expres-
sions.
Note that not all addressing modes are valid with every in-
struction, refer to the 6816 technical data for valid modes.
I.2.1 Inherent Instructions
aba abx aby abz
ace aced ade adx
ady adz aex aey
aez bgnd cba daa
ediv edivs emul emuls
fdiv fmuls idiv ldhi
lpstop mul nop psha
pshb pshmac pula pulb
pulmac rtr rts sba
sde sted swi sxt
tab tap tba tbek
tbsk tbxk tbyk tbzk
tde tdmsk tdp ted
tedm tekb tem tmer
tmet tmxed tpa tpd
tskb tsx tsy tsz
txkb txs txy txz
tykb tys tyx tyz
tzkb tzs tzx tzy
wai xgab xgde xgdx
xgdy xgdz xgex xgey
xgez
AS6816 ASSEMBLER PAGE I-3
68HC16 INSTRUCTION SET
I.2.2 Push/Pull Multiple Register Instructions
pshm r,... pulm r,...
I.2.3 Short Branch Instructions
bcc label bcs label
beq label bge label
bgt label bhi label
bhis label bhs label
ble label blo label
blos label bls label
blt label bmi label
bne label bpl label
bra label brn label
bvc label bvs label
bsr label
I.2.4 Long Branch Instructions
lbcc label lbcs label
lbeq label lbge label
lbgt label lbhi label
lbhis label lbhs label
lble label lblo label
lblos label lbls label
lblt label lbmi label
lbne label lbpl label
lbra label lbrn label
lbvc label lbvs label
lbsr label
I.2.5 Bit Manipulation Instructions
bclr [],#data
bset [],#data
brclr [],#data,label
brset [],#data,label
AS6816 ASSEMBLER PAGE I-4
68HC16 INSTRUCTION SET
I.2.6 Single Operand Instructions
asla aslb
asld asle
aslm
asl [] aslw []
asra asrb
asrd asre
asrm
asr [] asrw []
clra clrb
clrd clre
clrm
clr [] clrw []
coma comb
comd come
com [] comw []
deca decb
dec [] decw []
inca incb
inc [] incw []
lsla lslb
lsld lsle
lslm
lsl [] lslw []
lsra lsrb
lsrd lsre
lsr [] lsrw []
nega negb
negd nege
neg [] negw []
rola rolb
rold role
rol [] rolw []
rora rorb
rord rore
ror [] rorw []
tsta tstb
tsta tste
tst [] tstw []
AS6816 ASSEMBLER PAGE I-5
68HC16 INSTRUCTION SET
I.2.7 Double Operand Instructions
adca [] adcb []
adcd [] adce []
adda [] addb []
addd [] adde []
anda [] andb []
andd [] ande []
bita [] bitb []
cmpa [] cmpb []
cpd [] cpe []
eora [] eorb []
eord [] eore []
ldaa [] ldab []
ldd [] lde []
oraa [] orab []
ord [] ore []
sbca [] sbcb []
sbcd [] sbce []
staa [] stab []
std [] ste []
suba [] subb []
subd [] sube []
I.2.8 Index/Stack Register Instructions
cps [] cpx []
cpy [] cpz []
lds [] ldx []
ldy [] ldz []
sts [] stx []
sty [] stz []
AS6816 ASSEMBLER PAGE I-6
68HC16 INSTRUCTION SET
I.2.9 Jump and Jump to Subroutine Instructions
jmp bank,[] jsr bank,[]
I.2.10 Condition Code Register Instructions
andp #data orp #data
I.2.11 Multiply and Accumulate Instructions
mac #data rmac #data
mac #xo,#yo rmac #xo,#yo
APPENDIX J
ASH8 ASSEMBLER
J.1 H8/3XX REGISTER SET
The following is a list of the H8 registers used by ASH8:
r0 - r7,sp 16-bit accumulators
r0L - r7L,spL 8-bit accumulators
r0H - r7H,spH 8-bit accumulators
spL,spH,sp stack pointers
ccr condition code
J.2 H8/3XX INSTRUCTION SET
The following tables list all H8/3xx mnemonics recognized by
the ASH8 assembler. The designation [] refers to a required ad-
dressing mode argument. The following list specifies the format
for each addressing mode supported by ASH8:
#xx:3 immediate data (3 bit)
#xx:8 immediate data (8 bit)
#xx:16 immediate data (16 bit)
*dir direct page addressing
(see .setdp directive)
0xFF00 <= dir <= 0xFFFF
label branch label
rn registers (16 bit)
r0-r7,sp
rnB registers (8 bit)
r0H-r7H,r0L-r7L,spH,spL
ASH8 ASSEMBLER PAGE J-2
H8/3XX INSTRUCTION SET
ccr condition code register
@rn register indirect
@-rn register indirect (auto pre-decrement)
@rn+ register indirect (auto post-increment)
@[offset,rn] register indirect, 16-bit displacement
@@offset memory indirect, (8-bit address)
ext extended addressing (16-bit)
The terms data, dir, label, offset, and ext may all be expres-
sions.
Note that not all addressing modes are valid with every in-
struction, refer to the H8/3xx technical data for valid modes.
J.2.1 Inherent Instructions
eepmov
nop
sleep
rte
rts
J.2.2 Branch Instructions
bcc label bcs label
beq label bf label
bge label bgt label
bhi label bhis label
bhs label ble label
blo label blos label
bls label blt label
bmi label bne label
bpl label bra label
brn label bt label
bvc label bvs label
bsr label
ASH8 ASSEMBLER PAGE J-3
H8/3XX INSTRUCTION SET
J.2.3 Single Operand Instructions
Free Form
daa rnB das rnB
dec rnB inc rnB
neg rnB not rnB
rotxl rnB rotxr rnB
rotl rnB rotr rnB
shal rnB shar rnB
shll rnB shlr rnB
push rn pop rn
Byte / Word Form
daa.b rnB das.b rnB
dec.b rnB inc.b rnB
neg.b rnB not.b rnB
rotxl.b rnB rotxr.b rnB
rotl.b rnB rotr.b rnB
shal.b rnB shar.b rnB
shll.b rnB shlr.b rnB
push.w rn pop.w rn
ASH8 ASSEMBLER PAGE J-4
H8/3XX INSTRUCTION SET
J.2.4 Double Operand Instructions
Free Form
add rnB,rnB add #xx:8,rnB
add rn,rn
adds #1,rn adds #2,rn
addx rnB,rnB addx #xx:8,rnB
cmp rnB,rnB cmp #xx:8,rnB
cmp rn,rn
sub rnB,rnB
sub rn,rn
subs #1,rn subs #2,rn
subx rnB,rnB subx #xx:8,rnB
and rnB,rnB and #xx:8,rnB
and #xx:8,ccr
or rnB,rnB or #xx:8,rnB
or #xx:8,ccr
xor rnB,rnB xor #xx:8,rnB
xor #xx:8,ccr
Byte / Word Form
add.b rnB,rnB add.b #xx:8,rnB
add.w rn,rn
cmp.b rnB,rnB cmp.b #xx:8,rnB
cmp.w rn,rn
sub.b rnB,rnB
sub.w rn,rn
addx.b rnB,rnB addx.b #xx:8,rnB
and.b rnB,rnB and.b #xx:8,rnB
and.b #xx:8,ccr
or.b rnB,rnB or.b #xx:8,rnB
or.b #xx:8,ccr
subx.b rnB,rnB subx.b #xx:8,rnB
xor.b rnB,rnB xor.b #xx:8,rnB
xor.b #xx:8,ccr
ASH8 ASSEMBLER PAGE J-5
H8/3XX INSTRUCTION SET
J.2.5 Mov Instructions
Free Form
mov rnB,rnB mov rn,rn
mov #xx:8,rnB mov #xx:16,rn
mov @rn,rnB mov @rn,rn
mov @[offset,rn],rnB mov @[offset,rn],rn
mov @rn+,rnB mov @rn+,rn
mov @dir,rnB
mov dir,rnB
mov *@dir,rnB
mov *dir,rnB
mov @label,rnB mov @label,rn
mov label,rnB mov label,rn
mov rnB,@rn mov rn,@rn
mov rnB,@[offset,rn] mov rn,@[offset,rn]
mov rnB,@-rn mov rn,@-rn
mov rnB,@dir
mov rnB,dir
mov rnB,*@dir
mov rnB,*dir
mov rnB,@label mov rn,@label
mov rnB,label mov rn,label
Byte / Word Form
mov.b rnB,rnB mov.w rn,rn
mov.b #xx:8,rnB mov.w #xx:16,rn
mov.b @rn,rnB mov.w @rn,rn
mov.b @[offset,rn],rnB mov.w @[offset,rn],rn
mov.b @rn+,rnB mov.w @rn+,rn
mov.b @dir,rnB
mov.b dir,rnB
mov.b *@dir,rnB
mov.b *dir,rnB
mov.b @label,rnB mov.w @label,rn
mov.b label,rnB mov.w label,rn
mov.b rnB,@rn mov.w rn,@rn
mov.b rnB,@[offset,rn] mov.w rn,@[offset,rn]
mov.b rnB,@-rn mov.w rn,@-rn
mov.b rnB,@dir
mov.b rnB,dir
mov.b rnB,*@dir
mov.b rnB,*dir
mov.b rnB,@label mov.w rn,@label
mov.b rnB,label mov.w rn,label
ASH8 ASSEMBLER PAGE J-6
H8/3XX INSTRUCTION SET
J.2.6 Bit Manipulation Instructions
bld #xx:3,rnB bld #xx:3,@rn
bld #xx:3,@dir bld #xx:3,dir
bld #xx:3,*@dir bld #xx:3,*dir
bild #xx:3,rnB bild #xx:3,@rn
bild #xx:3,@dir bild #xx:3,dir
bild #xx:3,*@dir bild #xx:3,*dir
bst #xx:3,rnB bst #xx:3,@rn
bst #xx:3,@dir bst #xx:3,dir
bst #xx:3,*@dir bst #xx:3,*dir
bist #xx:3,rnB bist #xx:3,@rn
bist #xx:3,@dir bist #xx:3,dir
bist #xx:3,*@dir bist #xx:3,*dir
band #xx:3,rnB band #xx:3,@rn
band #xx:3,@dir band #xx:3,dir
band #xx:3,*@dir band #xx:3,*dir
biand #xx:3,rnB biand #xx:3,@rn
biand #xx:3,@dir biand #xx:3,dir
biand #xx:3,*@dir biand #xx:3,*dir
bor #xx:3,rnB bor #xx:3,@rn
bor #xx:3,@dir bor #xx:3,dir
bor #xx:3,*@dir bor #xx:3,*dir
bior #xx:3,rnB bior #xx:3,@rn
bior #xx:3,@dir bior #xx:3,dir
bior #xx:3,*@dir bior #xx:3,*dir
bxor #xx:3,rnB bxor #xx:3,@rn
bxor #xx:3,@dir bxor #xx:3,dir
bxor #xx:3,*@dir bxor #xx:3,*dir
bixor #xx:3,rnB bixor #xx:3,@rn
bixor #xx:3,@dir bixor #xx:3,dir
bixor #xx:3,*@dir bixor #xx:3,*dir
ASH8 ASSEMBLER PAGE J-7
H8/3XX INSTRUCTION SET
J.2.7 Extended Bit Manipulation Instructions
bset #xx:3,rnB bset #xx:3,@rn
bset #xx:3,@dir bset #xx:3,dir
bset #xx:3,*@dir bset #xx:3,*dir
bset rnB,rnB bset rnB,@rn
bset rnB,@dir bset rnB,dir
bset rnB,*@dir bset rnB,*dir
bclr #xx:3,rnB bclr #xx:3,@rn
bclr #xx:3,@dir bclr #xx:3,dir
bclr #xx:3,*@dir bclr #xx:3,*dir
bclr rnB,rnB bclr rnB,@rn
bclr rnB,@dir bclr rnB,dir
bclr rnB,*@dir bclr rnB,*dir
bnot #xx:3,rnB bnot #xx:3,@rn
bnot #xx:3,@dir bnot #xx:3,dir
bnot #xx:3,*@dir bnot #xx:3,*dir
bnot rnB,rnB bnot rnB,@rn
bnot rnB,@dir bnot rnB,dir
bnot rnB,*@dir bnot rnB,*dir
btst #xx:3,rnB btst #xx:3,@rn
btst #xx:3,@dir btst #xx:3,dir
btst #xx:3,*@dir btst #xx:3,*dir
btst rnB,rnB btst rnB,@rn
btst rnB,@dir btst rnB,dir
btst rnB,*@dir btst rnB,*dir
J.2.8 Condition Code Instructions
andc #xx:8,ccr andc #xx:8
and #xx:8,ccr and.b #xx:8,ccr
ldc #xx:8,ccr ldc #xx:8
ldc rnB,ccr ldc rnB
orc #xx:8,ccr orc #xx:8
or #xx:8,ccr or.b #xx:8,ccr
xorc #xx:8,ccr xorc #xx:8
xor #xx:8,ccr xor.b #xx:8,ccr
stc ccr,rnB stc rnB
ASH8 ASSEMBLER PAGE J-8
H8/3XX INSTRUCTION SET
J.2.9 Other Instructions
divxu rnB,rn divxu.b rnB,rn
mulxu rnB,rn mulxu.b rnB,rn
movfpe @label,rnB movfpe label,rnB
movfpe.b @label,rnB movfpe.b label,rnB
movtpe @label,rnB movtpe label,rnB
movtpe.b @label,rnB movtpe.b label,rnB
J.2.10 Jump and Jump to Subroutine Instructions
jmp @rn jmp @@dir
jmp @label jmp label
jsr @rn jsr @@dir
jsr @label jsr label
APPENDIX K
AS8051 ASSEMBLER
K.1 ACKNOWLEDGMENT
Thanks to John Hartman for his contribution of the AS8051
cross assembler.
John L. Hartman
jhartman@compuserve.com
K.2 8051 REGISTER SET
The following is a list of the 8051 registers used by AS8051:
a,b - 8-bit accumulators
r0,r1,r2,r3 - 8-bit registers
r4,r5,r6,r7
dptr - data pointer
sp - stack pointer
pc - program counter
psw - status word
c - carry (bit in status word)
AS8051 ASSEMBLER PAGE K-2
8051 REGISTER SET
K.3 8051 INSTRUCTION SET
The following tables list all 8051 mnemonics recognized by
the AS8051 assembler. The following list specifies the format
for each addressing mode supported by AS8051:
#data immediate data
byte or word data
r,r1,r2 register r0,r1,r2,r3,r4,r5,r6, or r7
@r indirect on register r0 or r1
@dptr indirect on data pointer
@a+dptr indirect on accumulator
plus data pointer
@a+pc indirect on accumulator
plus program counter
addr direct memory address
bitaddr bit address
label call or jump label
The terms data, addr, bitaddr, and label may all be expressions.
Note that not all addressing modes are valid with every in-
struction. Refer to the 8051 technical data for valid modes.
K.3.1 Inherent Instructions
nop
AS8051 ASSEMBLER PAGE K-3
8051 INSTRUCTION SET
K.3.2 Move Instructions
mov a,#data mov a,addr
mov a,r mov a,@r
mov r,#data mov r,addr
mov r,a
mov addr,a mov addr,#data
mov addr,r mov addr,@r
mov addr1,addr2 mov bitaddr,c
mov @r,#data mov @r,addr
mov @r,a
mov c,bitaddr
mov dptr,#data
movc a,@a+dptr movc a,@a+pc
movx a,@dptr movx a,@r
movx @dptr,a movx @r,a
K.3.3 Single Operand Instructions
clr a clr c
clr bitaddr
cpl a cpl c
cpl bitaddr
setb c setb bitaddr
da a
rr a rrc a
rl a rlc a
swap a
dec a dec r
dec @r
inc a inc r
inc dptr inc @r
div ab mul ab
pop addr push addr
AS8051 ASSEMBLER PAGE K-4
8051 INSTRUCTION SET
K.3.4 Two Operand Instructions
add a,#data add a,addr
add a,r add a,@r
addc a,#data addc a,addr
addc a,r addc a,@r
subb a,#data subb a,addr
subb a,r subb a,@r
orl a,#data orl a,addr
orl a,r orl a,@r
orl addr,a orl addr,#data
orl c,bitaddr orl c,/bitaddr
anl a,#data anl a,addr
anl a,r anl a,@r
anl addr,a anl addr,#data
anl c,bitaddr anl c,/bitaddr
xrl a,#data xrl a,addr
xrl a,r xrl a,@r
xrl addr,a xrl addr,#data
xrl c,bitaddr xrl c,/bitaddr
xch a,addr xch a,r
xch a,@r xchd a,@r
K.3.5 Call and Return Instructions
acall label lcall label
ret reti
in data
out data
rst data
K.3.6 Jump Instructions
ajmp label
cjne a,#data,label cjne a,addr,label
cjne r,#data,label cjne @r,#data,label
djnz r,label djnz addr,label
jbc bitadr,label
jb bitadr,label jnb bitadr,label
jc label jnc label
jz label jnz label
jmp @a+dptr
ljmp label sjmp label
AS8051 ASSEMBLER PAGE K-5
8051 INSTRUCTION SET
K.3.7 Predefined Symbols: SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
FC FF
F8 FB
F4 F7
F0 B F3
EC EF
E8 EB
E4 E7
E0 ACC E3
DC DF
D8 DB
D4 D7
D0 PSW D3
CC [ TL2 TH2 ] CF
C8 [ T2CON RCAP2L RCAP2H ] CB
C4 C7
C0 C3
BC BF
B8 IP BB
B4 B7
B0 P3 B3
AC AF
A8 IE AB
A4 A7
A0 P2 A3
9C 9F
98 SCON SBUF 9B
94 97
90 P1 93
8C TH0 TH1 8F
88 TCON TMOD TL0 TL1 8B
84 PCON 87
80 P0 SP DPL DPH 83
[...] Indicates Resident in 8052, not 8051
AS8051 ASSEMBLER PAGE K-6
8051 INSTRUCTION SET
K.3.8 Predefined Symbols: SFR Bit Addresses
---------- 4 BITS ----------
---- ---- ---- ----
FC FF
F8 FB
F4 B.4 B.5 B.6 B.7 F7
F0 B.0 B.1 B.2 B.3 F3
EC EF
E8 EB
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
DC DF
D8 DB
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
CC [ T2CON.4 T2CON.5 T2CON.6 T2CON.7 ] CF
C8 [ T2CON.0 T2CON.1 T2CON.2 T2CON.3 ] CB
C4 C7
C0 C3
BC IP.4 IP.5 IP.6 IP.7 BF
B8 IP.0 IP.1 IP.2 IP.3 BB
B4 P3.4 P3.5 P3.6 P3.7 B7
B0 P3.0 P3.1 P3.2 P3.3 B3
AC IE.4 IE.5 EI.6 IE.7 AF
A8 IE.0 IE.1 IE.2 IE.3 AB
A4 P2.4 P2.5 P2.6 P2.7 A7
A0 P2.0 P2.1 P2.2 P2.3 A3
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
98 SCON.0 SCON.1 SCON.2 SCON.3 9B
94 P1.4 P1.5 P1.6 P1.7 97
90 P1.0 P1.1 P1.2 P1.3 93
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
88 TCON.0 TCON.1 TCON.2 TCON.3 8B
84 P0.4 P0.5 P0.6 P0.7 87
80 P0.0 P0.1 P0.2 P0.3 83
[...] Indicates Resident in 8052, not 8051
AS8051 ASSEMBLER PAGE K-7
8051 INSTRUCTION SET
K.3.9 Predefined Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
FC FF
F8 FB
F4 F7
F0 F3
EC EF
E8 EB
E4 E7
E0 E3
DC DF
D8 DB
D4 RS1 F0 AC CY D7
D0 P OV RS0 D3
CC [ TLCK RCLK EXF2 TF2 ] CF
C8 [ CPRL2 CT2 TR2 EXEN2 ] CB
C4 C7
C0 C3
BC PS PT2 BF
B8 PX0 PT0 PX1 PT1 BB
B4 B7
B0 RXD TXD INT0 INT1 B3
AC ES ET2 EA AF
A8 EX0 ET0 EX1 ET1 AB
A4 A7
A0 A3
9C REN SM2 SM1 SM0 9F
98 RI TI RB8 TB8 9B
94 97
90 93
8C TR0 TF0 TR1 TF1 8F
88 IT0 IE0 IT1 IE1 8B
84 87
80 83
[...] Indicates Resident in 8052, not 8051
APPENDIX L
AS8085 ASSEMBLER
L.1 8085 REGISTER SET
The following is a list of the 8080/8085 registers used by
AS8085:
a,b,c,d,e,h,l - 8-bit accumulators
m - memory through (hl)
sp - stack pointer
psw - status word
L.2 8085 INSTRUCTION SET
The following tables list all 8080/8085 mnemonics recognized
by the AS8085 assembler. The following list specifies the
format for each addressing mode supported by AS8085:
#data immediate data
byte or word data
r,r1,r2 register or register pair
psw,a,b,c,d,e,h,l
bc,de,hl,sp,pc
m memory address using (hl)
addr direct memory addressing
label call or jump label
The terms data, m, addr, and label may be expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 8080/8085 technical data for valid
modes.
AS8085 ASSEMBLER PAGE L-2
8085 INSTRUCTION SET
L.2.1 Inherent Instructions
cma cmc
daa di
ei hlt
nop pchl
ral rar
ret rim
rrc rlc
sim sphl
stc xchg
xthl
L.2.2 Register/Memory/Immediate Instructions
adc r adc m aci #data
add r add m adi #data
ana r ana m ani #data
cmp r cmp m cpi #data
ora r ora m ori #data
sbb r sbb m sbi #data
sub r sub m sui #data
xra r xra m xri #data
L.2.3 Call and Return Instructions
cc label rc
cm label rm
cnc label rnc
cnz label rnz
cp label rp
cpe label rpe
cpo label rpo
cz label rz
call label
L.2.4 Jump Instructions
jc label
jm label
jnc label
jnz label
jp label
jpe label
jpo label
jz label
jmp label
AS8085 ASSEMBLER PAGE L-3
8085 INSTRUCTION SET
L.2.5 Input/Output/Reset Instructions
in data
out data
rst data
L.2.6 Move Instructions
mov r1,r2
mov r,m
mov m,r
mvi r,#data
mvi m,#data
L.2.7 Other Instructions
dcr r dcr m
inr r inr m
dad r dcx r
inx r ldax r
pop r push r
stax r
lda addr lhld addr
shld addr sta addr
lxi r,#data
APPENDIX M
AS8XCXXX ASSEMBLER
M.1 ACKNOWLEDGMENTS
Thanks to Bill McKinnon for his contributions to the AS8XCXXX
cross assembler.
Bill McKinnon
w_mckinnon@conknet.com
This assembler was derived from the AS8051 cross assembler
contributed by John Hartman.
John L. Hartman
jhartman@compuserve.com
M.2 DS8XCXXX ASSEMBLER DIRECTIVES
The AS8XCXXX assembler contains directives to specify the
particular SFR (Special Function Registers) to be enabled during
the assembly process. The following directives are supported:
.DS8XCXXX ;80C32 core
.DS80C310 ;Dallas Semiconductor
.DS80C320 ;Microprocessors
.DS80C323
.DS80C390
.DS83C520
.DS83C530
.DS83C550
.DS87C520
.DS87C530
.DS87C550
If the microprocessor selector directive is followed by a
AS8XCXXX ASSEMBLER PAGE M-2
DS8XCXXX ASSEMBLER DIRECTIVES
non-zero argument then the SFR register bit values will also be
defined.
If a microprocessor selector directive is not specified then
no SFR or SFR register bit values will be defined. This mode
allows the SFR to be defined by an external assembly source
file. The file DS8XCXXX.SFR contains the SFR and SFR register
bit values for all the microprocessor selector directives. This
file may be modified to create a new SFR for other microproces-
sor types.
Also, if a microprocessor selector directive is not specified
then the following address length assembler directives are
accepted:
.16bit ;16-Bit Addressing
.24bit ;24-Bit Addressing
.32bit ;32-Bit Addressing
These directives specify the assembler addressing space and ef-
fect the output format for the .lst, .sym, and .rel files.
The default addressing space for defined microprocessors is
16-Bit except for the DS80C390 microprocessor which is 24-Bit.
M.2.1 DS80C390 Addressing Mode Directive
The DS80C390 microprocessor supports 16-Bit and 24-Bit ad-
dressing modes. The .amode assembler directive provides a
method to select the addressing mode used by the ajmp, acall,
ljmp, and lcall instructions. These four instructions support
16 and 24 bit addressing modes selected by bits AM0 and AM1 in
the ACON register. The assembler is 'informed' about the ad-
dressing mode selected by using the .amode directive:
.amode 2 ;mode 2 is 24-bit addressing
If a second argument is specified and its value is non-zero,
then a three instruction sequence is inserted at the .amode lo-
cation loading the mode bits into the ACON register:
.amode 2,1 ;mode 2 is 24-bit addressing, load ACON
;mov ta,#0xAA
;mov ta,#0x55
;mov acon,#amode
AS8XCXXX ASSEMBLER PAGE M-3
DS8XCXXX ASSEMBLER DIRECTIVES
M.3 DS8XCXXX REGISTER SET
The AS8XCXXX cross assembler supports the Dallas Semiconductor
DS8XCXXX series of 8051-compatible devices. These microproces-
sors retain instruction set and object code compatability with
the 8051 microprocessor. The DS8XCXXX family is updated with
several new peripherals while providing all the standard
features of the 80C32 microprocessor.
The following is a list of the registers used by AS8XCXXX:
a,b - 8-bit accumulators
r0,r1,r2,r3 - 8-bit registers
r4,r5,r6,r7
dptr - data pointer
sp - stack pointer
pc - program counter
psw - status word
c - carry (bit in status word)
M.4 DS8XCXXX INSTRUCTION SET
The following tables list all DS8XCXXX mnemonics recognized
by the AS8XCXXX assembler. The following list specifies the
format for each addressing mode supported by AS8XCXXX:
#data immediate data
byte or word data
r,r1,r2 register r0,r1,r2,r3,r4,r5,r6, or r7
@r indirect on register r0 or r1
@dptr indirect on data pointer
@a+dptr indirect on accumulator
plus data pointer
@a+pc indirect on accumulator
plus program counter
addr direct memory address
bitaddr bit address
label call or jump label
The terms data, addr, bitaddr, and label may all be expressions.
Note that not all addressing modes are valid with every in-
struction. Refer to the DS8XCXXX technical data for valid
modes.
AS8XCXXX ASSEMBLER PAGE M-4
DS8XCXXX INSTRUCTION SET
M.4.1 Inherent Instructions
nop
M.4.2 Move Instructions
mov a,#data mov a,addr
mov a,r mov a,@r
mov r,#data mov r,addr
mov r,a
mov addr,a mov addr,#data
mov addr,r mov addr,@r
mov addr1,addr2 mov bitaddr,c
mov @r,#data mov @r,addr
mov @r,a
mov c,bitaddr
mov dptr,#data
movc a,@a+dptr movc a,@a+pc
movx a,@dptr movx a,@r
movx @dptr,a movx @r,a
M.4.3 Single Operand Instructions
clr a clr c
clr bitaddr
cpl a cpl c
cpl bitaddr
setb c setb bitaddr
da a
rr a rrc a
rl a rlc a
swap a
dec a dec r
dec @r
inc a inc r
inc dptr inc @r
div ab mul ab
pop addr push addr
AS8XCXXX ASSEMBLER PAGE M-5
DS8XCXXX INSTRUCTION SET
M.4.4 Two Operand Instructions
add a,#data add a,addr
add a,r add a,@r
addc a,#data addc a,addr
addc a,r addc a,@r
subb a,#data subb a,addr
subb a,r subb a,@r
orl a,#data orl a,addr
orl a,r orl a,@r
orl addr,a orl addr,#data
orl c,bitaddr orl c,/bitaddr
anl a,#data anl a,addr
anl a,r anl a,@r
anl addr,a anl addr,#data
anl c,bitaddr anl c,/bitaddr
xrl a,#data xrl a,addr
xrl a,r xrl a,@r
xrl addr,a xrl addr,#data
xrl c,bitaddr xrl c,/bitaddr
xch a,addr xch a,r
xch a,@r xchd a,@r
M.4.5 Call and Return Instructions
acall label lcall label
ret reti
in data
out data
rst data
M.4.6 Jump Instructions
ajmp label
cjne a,#data,label cjne a,addr,label
cjne r,#data,label cjne @r,#data,label
djnz r,label djnz addr,label
jbc bitadr,label
jb bitadr,label jnb bitadr,label
jc label jnc label
jz label jnz label
jmp @a+dptr
ljmp label sjmp label
AS8XCXXX ASSEMBLER PAGE M-6
DS8XCXXX INSTRUCTION SET
M.5 DS8XCXXX SPECIAL FUNCTION REGISTERS
The 80C32 core Special Function Registers are selected using
the .DS8xCxxx assembler directive.
M.5.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 SP DPL DPH 83
84 PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 8F
90 P1 93
94 97
98 SCON SBUF 9B
9C 9F
A0 P2 A3
A4 A7
A8 IE SADDR0 AB
AC AF
B0 P3 B3
B4 B7
B8 IP SADEN0 BB
BC BF
C0 C3
C4 STATUS C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 CF
D0 PSW D3
D4 D7
D8 DB
DC DF
E0 ACC E3
E4 E7
E8 EB
EC EF
F0 B F3
F4 F7
F8 FB
FC FF
AS8XCXXX ASSEMBLER PAGE M-7
DS8XCXXX SPECIAL FUNCTION REGISTERS
M.5.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
P1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
C0 C3
C4 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
D8 DB
DC DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
E8 EB
EC EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
F8 FB
FC FF
AS8XCXXX ASSEMBLER PAGE M-8
DS8XCXXX SPECIAL FUNCTION REGISTERS
M.5.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 BF
C0 C3
C4 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
D8 DB
DC DF
E0 E3
E4 E7
E8 EB
EC EF
F0 F3
F4 F7
F8 FB
FC FF
Alternates:
SCON 98 9B
9C FE 9F
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-9
DS8XCXXX SPECIAL FUNCTION REGISTERS
M.5.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
PCON 0x80 SMOD SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
STATUS 0x80 HIP LIP 0x10
0x08 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
AS8XCXXX ASSEMBLER PAGE M-10
DS8XCXXX SPECIAL FUNCTION REGISTERS
M.6 DS80C310 SPECIAL FUNCTION REGISTERS
The DS80C310 Special Function Registers are selected using
the .DS80C310 assembler directive.
M.6.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 P1 EXIF 93
94 97
98 SCON SBUF 9B
9C 9F
A0 P2 A3
A4 A7
A8 IE SADDR0 AB
AC AF
B0 P3 B3
B4 B7
B8 IP SADEN0 BB
BC BF
C0 C3
C4 STATUS C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 CF
D0 PSW D3
D4 D7
D8 WDCON DB
DC DF
E0 ACC E3
E4 E7
E8 EIE EB
EC EF
F0 B F3
F4 F7
F8 EIP FB
FC FF
AS8XCXXX ASSEMBLER PAGE M-11
DS80C310 SPECIAL FUNCTION REGISTERS
M.6.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
P1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
C0 C3
C4 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
WDCON D8 WDCON.0 WDCON.1 WDCON.2 WDCON.3 DB
DC WDCON.4 WDCON.5 WDCON.6 WDCON.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
AS8XCXXX ASSEMBLER PAGE M-12
DS80C310 SPECIAL FUNCTION REGISTERS
M.6.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 BF
C0 C3
C4 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
WDCON D8 DB
DC POR DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC FF
Alternates:
SCON 98 9B
9C FE 9F
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-13
DS80C310 SPECIAL FUNCTION REGISTERS
M.6.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 0x10
0x08 SEL 0x01
PCON 0x80 SMOD SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
EXIF 0x80 IE5 IE4 IE3 IE2 0x10
0x08 0x01
STATUS 0x80 HIP LIP 0x10
0x08 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
Alternates:
PCON 0x80 SMOD_0 0x10
0x08 0x01
AS8XCXXX ASSEMBLER PAGE M-14
DS80C310 SPECIAL FUNCTION REGISTERS
M.7 DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS
The DS80C320/DS80C323 Special Function Registers are selected
using the .DS80C320 or DS80C323 assembler directives.
M.7.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 P1 EXIF 93
94 97
98 SCON0 SBUF0 9B
9C 9F
A0 P2 A3
A4 A7
A8 IE SADDR0 AB
AC AF
B0 P3 B3
B4 B7
B8 IP SADEN0 BB
BC BF
C0 SCON1 SBUF1 C3
C4 STATUS TA C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 CF
D0 PSW D3
D4 D7
D8 WDCON DB
DC DF
E0 ACC E3
E4 E7
E8 EIE EB
EC EF
F0 B F3
F4 F7
F8 EIP FB
FC FF
Alternates:
98 SCON SBUF 9B
AS8XCXXX ASSEMBLER PAGE M-15
DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS
M.7.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
P1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON0 98 SCON0.0 SCON0.1 SCON0.2 SCON0.3 9B
9C SCON0.4 SCON0.5 SCON0.6 SCON0.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
SCON1 C0 SCON1.0 SCON1.1 SCON1.2 SCON1.3 C3
C4 SCON1.4 SCON1.5 SCON1.6 SCON1.7 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
WDCON D8 WDCON.0 WDCON.1 WDCON.2 WDCON.3 DB
DC WDCON.4 WDCON.5 WDCON.6 WDCON.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
Alternates:
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
AS8XCXXX ASSEMBLER PAGE M-16
DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS
M.7.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON0 98 RI_0 TI_0 RB8_0 TB8_0 9B
9C REN_0 SM2_0 SM1_0 SMO_0 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 BF
SCON1 C0 RI_1 TI_1 RB8_1 TB8_1 C3
C4 REN_1 SM2_1 SM1_1 SMO_1 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
WDCON D8 RWT EWT WTRF WDIF DB
DC PFI EPFI POR SMOD_1 DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC EWDI EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC PWDI FF
Alternates:
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
SCON 98 9B
9C FE 9F
SCON0 98 9B
9C FE_0 9F
SCON1 C0 C3
C4 FE_1 C7
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-17
DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS
M.7.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 0x10
0x08 SEL 0x01
PCON 0x80 SMOD_0 SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 WD1 WD0 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
EXIF 0x80 IE5 IE4 IE3 IE2 0x10
0x08 RGMD RGSL BGS 0x01
STATUS 0x80 PIP HIP LIP 0x10
0x08 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
Alternates:
PCON 0x80 SMOD 0x10
0x08 0x01
AS8XCXXX ASSEMBLER PAGE M-18
DS80C320/DS80C323 SPECIAL FUNCTION REGISTERS
M.8 DS80C390 SPECIAL FUNCTION REGISTERS
The DS80C390 Special Function Registers are selected using
the .DS80C390 assembler directive.
M.8.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 P4 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 P1 EXIF P4CNT DPX 93
94 DPX1 C0RMS0 C0RMS1 97
98 SCON0 SBUF0 ESP 9B
9C AP ACON C0TMA0 C0TMA1 9F
A0 P2 P5 P5CNT C0C A3
A4 C0S C0IR C0TE C0RE A7
A8 IE SADDR0 SADDR1 C0M1C AB
AC C0M2C C0M3C C0M4C C0M5C AF
B0 P3 C0M6C B3
B4 C0M7C C0M8C C0M9C C0M10C B7
B8 IP SADEN0 SADEN1 C0M11C BB
BC C0M12C C0M13C C0M14C C0M15C BF
C0 SCON1 SBUF1 C3
C4 PMR STATUS MCON TA C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 COR CF
D0 PSW MCNT0 MCNT1 MA D3
D4 MB MC C1RMS0 C1RMS1 D7
D8 WDCON DB
DC C1TMA0 C1TMA1 DF
E0 ACC C1C E3
E4 C1S C1IR C1TE C1RE E7
E8 EIE MXAX C1M1C EB
EC C1M2C C1M3C C1M4C C1M5C EF
F0 B C1M6C F3
F4 C1M7C C1M8C C1M9C C1M10C F7
F8 EIP C1M11C FB
FC C1M12C C1M13C C1M14C C1M15C FF
Alternates:
98 SCON SBUF 9B
AS8XCXXX ASSEMBLER PAGE M-19
DS80C390 SPECIAL FUNCTION REGISTERS
M.8.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
P4 80 P4.0 P4.1 P4.2 P4.3 83
84 P4.4 P4.5 P4.6 P4.7 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
P1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON0 98 SCON0.0 SCON0.1 SCON0.2 SCON0.3 9B
9C SCON0.4 SCON0.5 SCON0.6 SCON0.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
SCON1 C0 SCON1.0 SCON1.1 SCON1.2 SCON1.3 C3
C4 SCON1.4 SCON1.5 SCON1.6 SCON1.7 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
WDCON D8 WDCON.0 WDCON.1 WDCON.2 WDCON.3 DB
DC WDCON.4 WDCON.5 WDCON.6 WDCON.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
Alternates:
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
AS8XCXXX ASSEMBLER PAGE M-20
DS80C390 SPECIAL FUNCTION REGISTERS
M.8.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
P1 90 T2 T2EX RXD1 TXD1 93
94 INT2 INT3 INT4 INT5 97
SCON0 98 RI_0 TI_0 RB8_0 TB8_0 9B
9C REN_0 SM2_0 SM1_0 SMO_0 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 ES1 EA AF
P3 B0 RXD0 TXD0 INT0 INT1 B3
B4 T0 T1 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 PS1 BF
SCON1 C0 RI_1 TI_1 RB8_1 TB8_1 C3
C4 REN_1 SM2_1 SM1_1 SMO_1 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
WDCON D8 RWT EWT WTRF WDIF DB
DC PFI EPFI POR SMOD_1 DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC EWDI C1IE C0IE CANBIE EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC PWDI C1IP C0IP CANBIP FF
Alternates:
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
SCON 98 9B
9C FE 9F
SCON0 98 9B
9C FE_0 9F
SCON1 C0 C3
C4 FE_1 C7
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-21
DS80C390 SPECIAL FUNCTION REGISTERS
M.8.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 ID1 ID0 TSL 0x10
0x08 SEL 0x01
PCON 0x80 SMOD_0 SMOD0 OFDF OFDE 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 WD1 WD0 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
EXIF 0x80 IE5 IE4 IE3 IE2 0x10
0x08 CKRY RGMD RGSL BGS 0x01
P4CNT 0x80 SBCAN 0x10
0x08 0x01
ESP 0x80 0x10
0x08 ESP.1 ESP.0 0x01
ACON 0x80 0x10
0x08 SA AM1 AM0 0x01
P5 0x80 P5.7 P5.6 P5.5 P5.4 0x10
0x08 P5.3 P5.2 P5.1 P5.0 0x01
P5CNT 0x80 CAN1BA CAN0BA SP1EC C1_IO 0x10
0x08 C0_IO P5CNT.2 P5CNT.1 P5CNT.0 0x01
CxC 0x80 ERIE STIE PDE SIESTA 0x10
0x08 CRST AUTOB ERCS SWINT 0x01
CxS 0x80 BSS EC96_128 WKS RXS 0x10
0x08 TXS ER2 ER1 ER0 0x01
CxIR 0x80 INTIN7 INTIN6 INTIN5 INTIN4 0x10
0x08 INTIN3 INTIN2 INTIN1 INTIN0 0x01
CxCxxC 0x80 MSRDY ET1 ER1 INTRQ 0x10
0x08 EXTRQ MTRQ ROW_TIH DTUP 0x01
PMR 0x80 CD1 CD0 SWB CTM 0x10
0x08 4X_2X ALEOFF 0x01
STATUS 0x80 PIP HIP LIP 0x10
0x08 SPTA1 SPRA1 SPTA0 SPRA0 0x01
MCON 0x80 IDM1 IDM0 CMA 0x10
0x08 PDCE3 PDCE2 PDCE1 PDCE0 0x01
T2MOD 0x80 D13T1 0x10
0x08 D13T2 T2OE DCEN 0x01
COR 0x80 IRDACK C1BPR7 C1BPR6 C0BPR7 0x10
0x08 C0BPR6 COD1 COD0 CLKOE 0x01
MCNT0 0x80 _LSHIFT CSE SCB MAS4 0x10
0x08 MAS3 MAS2 MAS1 MAS0 0x01
MCNT1 0x80 MST MOF CLM 0x10
0x08 0x01
Alternates:
AS8XCXXX ASSEMBLER PAGE M-22
DS80C390 SPECIAL FUNCTION REGISTERS
PCON 0x80 SMOD 0x10
0x08 0x01
AS8XCXXX ASSEMBLER PAGE M-23
DS80C390 SPECIAL FUNCTION REGISTERS
M.9 DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS
The DS83C520/DS87C520 Special Function Registers are selected
using the .DS83C520 or DS87C520 assembler directives.
M.9.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 P0 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 PORT1 EXIF 93
94 97
98 SCON0 SBUF0 9B
9C 9F
A0 P2 A3
A4 A7
A8 IE SADDR0 SADDR1 AB
AC AF
B0 P3 B3
B4 B7
B8 IP SADEN0 SADEN1 BB
BC BF
C0 SCON1 SBUF1 ROMSIZE C3
C4 PMR STATUS TA C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 CF
D0 PSW D3
D4 D7
D8 WDCON DB
DC DF
E0 ACC E3
E4 E7
E8 EIE EB
EC EF
F0 B F3
F4 F7
F8 EIP FB
FC FF
Alternates:
98 SCON SBUF 9B
AS8XCXXX ASSEMBLER PAGE M-24
DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS
M.9.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
P0 80 P0.7 P0.6 P0.5 P0.4 83
84 P0.3 P0.2 P0.1 P0.0 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
PORT1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON0 98 SCON0.0 SCON0.1 SCON0.2 SCON0.3 9B
9C SCON0.4 SCON0.5 SCON0.6 SCON0.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
SCON1 C0 SCON1.0 SCON1.1 SCON1.2 SCON1.3 C3
C4 SCON1.4 SCON1.5 SCON1.6 SCON1.7 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
WDCON D8 WDCON.0 WDCON.1 WDCON.2 WDCON.3 DB
DC WDCON.4 WDCON.5 WDCON.6 WDCON.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
Alternates:
PORT1 90 PORT1.0 PORT1.1 PORT1.2 PORT1.3 93
94 PORT1.4 PORT1.5 PORT1.6 PORT1.7 97
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
AS8XCXXX ASSEMBLER PAGE M-25
DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS
M.9.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON0 98 RI_0 TI_0 RB8_0 TB8_0 9B
9C REN_0 SM2_0 SM1_0 SMO_0 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 ES1 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 PS1 BF
SCON1 C0 RI_1 TI_1 RB8_1 TB8_1 C3
C4 REN_1 SM2_1 SM1_1 SMO_1 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
WDCON D8 RWT EWT WTRF WDIF DB
DC PFI EPFI POR SMOD_1 DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC EWDI EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC PWDI FF
Alternates:
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
SCON 98 9B
9C FE 9F
SCON0 98 9B
9C FE_0 9F
SCON1 C0 C3
C4 FE_1 C7
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-26
DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS
M.9.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 0x10
0x08 SEL 0x01
PCON 0x80 SMOD_0 SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 WD1 WD0 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
EXIF 0x80 IE5 IE4 IE3 IE 0x10
0x08 XT_RG RGMD RGSL BGS 0x01
SBUF1 0x80 SB7 SB6 SB5 SB4 0x10
0x08 SB3 SB2 SB1 SB0 0x01
ROMSIZE 0x80 0x10
0x08 RMS2 RMS1 RMS0 0x01
PMR 0x80 CD1 CD0 SWB 0x10
0x08 XTOFF ALEOFF DME1 DME0 0x01
STATUS 0x80 PIP HIP LIP XTUP 0x10
0x08 SPTA1 SPRA1 SPTA0 SPRA0 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
Alternates:
PCON 0x80 SMOD 0x10
0x08 0x01
AS8XCXXX ASSEMBLER PAGE M-27
DS83C520/DS87C520 SPECIAL FUNCTION REGISTERS
M.10 DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS
The DS83C530/DS87C530 Special Function Registers are selected
using the .DS83C530 or DS87C530 assembler directives.
M.10.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 P0 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 P1 EXIF 93
94 TRIM 97
98 SCON0 SBUF0 9B
9C 9F
A0 P2 A3
A4 A7
A8 IE SADDR0 SADDR1 AB
AC AF
B0 P3 B3
B4 B7
B8 IP SADEN0 SADEN1 BB
BC BF
C0 SCON1 SBUF1 ROMSIZE C3
C4 PMR STATUS TA C7
C8 T2CON T2MOD RCAP2L RCAP2H CB
CC TL2 TH2 CF
D0 PSW D3
D4 D7
D8 WDCON DB
DC DF
E0 ACC E3
E4 E7
E8 EIE EB
EC EF
F0 B RTASS RTAS F3
F4 RTAM RTAH F7
F8 EIP RTCC RTCSS RTCS FB
FC RTCM RTCH RTCD0 RTCD1 FF
Alternates:
98 SCON SBUF 9B
AS8XCXXX ASSEMBLER PAGE M-28
DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS
M.10.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
P0 80 P0.7 P0.6 P0.5 P0.4 83
84 P0.3 P0.2 P0.1 P0.0 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
P1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON0 98 SCON0.0 SCON0.1 SCON0.2 SCON0.3 9B
9C SCON0.4 SCON0.5 SCON0.6 SCON0.7 9F
P2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
P3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
SCON1 C0 SCON1.0 SCON1.1 SCON1.2 SCON1.3 C3
C4 SCON1.4 SCON1.5 SCON1.6 SCON1.7 C7
T2CON C8 T2CON.0 T2CON.1 T2CON.2 T2CON.3 CB
CC T2CON.4 T2CON.5 T2CON.6 T2CON.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
WDCON D8 WDCON.0 WDCON.1 WDCON.2 WDCON.3 DB
DC WDCON.4 WDCON.5 WDCON.6 WDCON.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
Alternates:
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
AS8XCXXX ASSEMBLER PAGE M-29
DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS
M.10.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON0 98 RI_0 TI_0 RB8_0 TB8_0 9B
9C REN_0 SM2_0 SM1_0 SMO_0 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 ES1 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PT2 PS1 BF
SCON1 C0 RI_1 TI_1 RB8_1 TB8_1 C3
C4 REN_1 SM2_1 SM1_1 SMO_1 C7
T2CON C8 CPRL2 CT2 TR2 EXEN2 CB
CC TCLK RCLK EXF2 TF2 CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
WDCON D8 RWT EWT WTRF WDIF DB
DC PFI EPFI POR SMOD_1 DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC EWDI ERTCI EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC PWDI PRTCI FF
Alternates:
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
SCON 98 9B
9C FE 9F
SCON0 98 9B
9C FE_0 9F
SCON1 C0 C3
C4 FE_1 C7
T2CON C8 CP_RL2 C_T2 CB
CC CF
AS8XCXXX ASSEMBLER PAGE M-30
DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS
M.10.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 0x10
0x08 SEL 0x01
PCON 0x80 SMOD_0 SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 WD1 WD0 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
EXIF 0x80 IE5 IE4 IE3 IE 0x10
0x08 XT_RG RGMD RGSL BGS 0x01
TRIM 0x80 E4K X12_6 TRM2 _TRM2 0x10
0x08 TRM1 _TRM1 TRM0 _TRM0 0x01
SBUF1 0x80 SB7 SB6 SB5 SB4 0x10
0x08 SB3 SB2 SB1 SB0 0x01
ROMSIZE 0x80 0x10
0x08 RMS2 RMS1 RMS0 0x01
PMR 0x80 CD1 CD0 SWB 0x10
0x08 XTOFF ALEOFF DME1 DME0 0x01
STATUS 0x80 PIP HIP LIP XTUP 0x10
0x08 SPTA1 SPRA1 SPTA0 SPRA0 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
RTCC 0x80 SSCE SCE MCE HCE 0x10
0x08 RTCRE RTCWE RTCIF RTCE 0x01
Alternates:
PCON 0x80 SMOD 0x10
0x08 0x01
AS8XCXXX ASSEMBLER PAGE M-31
DS83C530/DS87C530 SPECIAL FUNCTION REGISTERS
M.11 DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
The DS83C550/DS87C550 Special Function Registers are selected
using the .DS83C550 or DS87C550 assembler directives.
M.11.1 SFR Map
--------- 4 Bytes ----------
---- ---- ---- ----
80 PORT0 SP DPL DPH 83
84 DPL1 DPH1 DPS PCON 87
88 TCON TMOD TL0 TL1 8B
8C TH0 TH1 CKCON 8F
90 PORT1 RCON 93
94 97
98 SCON0 SBUF0 9B
9C PMR 9F
A0 PORT2 SADDR0 SADDR1 A3
A4 A7
A8 IE CMPL0 CMPL1 CMPL2 AB
AC CPTL0 CPTL1 CPTL2 CPTL3 AF
B0 PORT3 ADCON1 ADCON2 B3
B4 ADMSB ADLSD WINHI WINLO B7
B8 IP SADEN0 SADEN1 BB
BC T2CON T2MOD BF
C0 PORT4 ROMSIZE C3
C4 PORT5 STATUS TA C7
C8 T2IR CMPH0 CMPH1 CMPH2 CB
CC CPTH0 CPTH1 CPTH2 CPTH3 CF
D0 PSW PW0FG PW1FG D3
D4 PW2FG PW3FG PWMADR D7
D8 SCON1 SBUF1 DB
DC PWM0 PWM1 PWM2 PWM3 DF
E0 ACC PW01CS PW23CS PW01CON E3
E4 PW23CON RLOADL RLOADH E7
E8 EIE T2SEL CTCON EB
EC TL2 TH2 SETR RSTR EF
F0 B PORT6 F3
F4 F7
F8 EIP FB
FC WDCON FF
Alternates:
80 P0 83
90 P1 93
98 SCON SBUF 9B
A0 P2 A3
B0 P3 B3
C0 P4 C3
AS8XCXXX ASSEMBLER PAGE M-32
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
C4 P5 C7
F0 PORT6 F3
AS8XCXXX ASSEMBLER PAGE M-33
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
M.11.2 Bit Addressable Registers: Generic
---------- 4 BITS ----------
---- ---- ---- ----
PORT0 80 P0.7 P0.6 P0.5 P0.4 83
84 P0.3 P0.2 P0.1 P0.0 87
TCON 88 TCON.0 TCON.1 TCON.2 TCON.3 8B
8C TCON.4 TCON.5 TCON.6 TCON.7 8F
PORT1 90 P1.0 P1.1 P1.2 P1.3 93
94 P1.4 P1.5 P1.6 P1.7 97
SCON0 98 SCON0.0 SCON0.1 SCON0.2 SCON0.3 9B
9C SCON0.4 SCON0.5 SCON0.6 SCON0.7 9F
PORT2 A0 P2.0 P2.1 P2.2 P2.3 A3
A4 P2.4 P2.5 P2.6 P2.7 A7
IE A8 IE.0 IE.1 IE.2 IE.3 AB
AC IE.4 IE.5 EI.6 IE.7 AF
PORT3 B0 P3.0 P3.1 P3.2 P3.3 B3
B4 P3.4 P3.5 P3.6 P3.7 B7
IP B8 IP.0 IP.1 IP.2 IP.3 BB
BC IP.4 IP.5 IP.6 IP.7 BF
PORT4 C0 P4.0 P4.1 P4.2 P4.3 C3
C4 P4.4 P4.5 P4.6 P4.7 C7
T2IR C8 T2IR.0 T2IR.1 T2IR.2 T2IR.3 CB
CC T2IR.4 T2IR.5 T2IR.6 T2IR.7 CF
PSW D0 PSW.0 PSW.1 PSW.2 PSW.3 D3
D4 PSW.4 PSW.5 PSW.6 PSW.7 D7
SCON1 D8 SCON1.0 SCON1.1 SCON1.2 SCON1.3 DB
DC SCON1.4 SCON1.5 SCON1.6 SCON1.7 DF
ACC E0 ACC.0 ACC.1 ACC.2 ACC.3 E3
E4 ACC.4 ACC.5 ACC.6 ACC.7 E7
EIE E8 EIE.0 EIE.1 EIE.2 EIE.3 EB
EC EIE.4 EIE.5 EIE.6 EIE.7 EF
B F0 B.0 B.1 B.2 B.3 F3
F4 B.4 B.5 B.6 B.7 F7
EIP F8 EIP.0 EIP.1 EIP.2 EIP.3 FB
FC EIP.4 EIP.5 EIP.6 EIP.7 FF
Alternates:
PORT0 80 PORT0.7 PORT0.6 PORT0.5 PORT0.4 83
84 PORT0.3 PORT0.2 PORT0.1 PORT0.0 87
PORT1 90 PORT1.0 PORT1.1 PORT1.2 PORT1.3 93
94 PORT1.4 PORT1.5 PORT1.6 PORT1.7 97
SCON 98 SCON.0 SCON.1 SCON.2 SCON.3 9B
9C SCON.4 SCON.5 SCON.6 SCON.7 9F
PORT2 A0 PORT2.0 PORT2.1 PORT2.2 PORT2.3 A3
A4 PORT2.4 PORT2.5 PORT2.6 PORT2.7 A7
PORT3 B0 PORT3.0 PORT3.1 PORT3.2 PORT3.3 B3
B4 PORT3.4 PORT3.5 PORT3.6 PORT3.7 B7
PORT4 C0 PORT4.0 PORT4.1 PORT4.2 PORT4.3 C3
C4 PORT4.4 PORT4.5 PORT4.6 PORT4.7 C7
AS8XCXXX ASSEMBLER PAGE M-34
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
M.11.3 Bit Addressable Registers: Specific
---------- 4 BITS ----------
---- ---- ---- ----
80 83
84 87
TCON 88 IT0 IE0 IT1 IE1 8B
8C TR0 TF0 TR1 TF1 8F
90 93
94 97
SCON0 98 RI_0 TI_0 RB8_0 TB8_0 9B
9C REN_0 SM2_0 SM1_0 SMO_0 9F
A0 A3
A4 A7
IE A8 EX0 ET0 EX1 ET1 AB
AC ES0 ET2 ES1 EA AF
B0 B3
B4 B7
IP B8 PX0 PT0 PX1 PT1 BB
BC PS0 PS1 PAD BF
PORT4 C0 CMSR0 CMSR1 CMSR2 CMSR3 C3
C4 CMSR4 CMSR5 CMT0 CMT1 C7
T2IR C8 CF0 CF1 CF2 CF3 CB
CC CM0F CM1F CM2F CF
PSW D0 P FL OV RS0 D3
D4 RS1 F0 AC CY D7
SCON1 D8 RI_1 TI_1 RB8_1 TB8_1 DB
DC REN_1 SM2_1 SM1_1 SMO_1 DF
E0 E3
E4 E7
EIE E8 EX2 EX3 EX4 EX5 EB
EC ECM0 ECM1 ECM2 ET2 EF
F0 F3
F4 F7
EIP F8 PX2 PX3 PX4 PX5 FB
FC PCM0 PCM1 PCM2 PT2 FF
Alternates:
SCON 98 RI TI RB8 TB8 9B
9C REN SM2 SM1 SMO 9F
SCON 98 9B
9C FE 9F
SCON0 98 9B
9C FE_0 9F
T2IR C8 IE2 IE3 IE4 IE5 CB
CC CF
SCON1 D8 DB
DC FE_1 DF
EIE E8 EC0 EC1 EC2 EC3 EB
EC EF
EIP F8 PC0 PC1 PC2 PC3 FB
AS8XCXXX ASSEMBLER PAGE M-35
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
FC FF
AS8XCXXX ASSEMBLER PAGE M-36
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
M.11.4 Optional Symbols: Control Bits
---------- 4 BITS ----------
---- ---- ---- ----
0x80 0x40 0x20 0x10
0x08 0x04 0x02 0x10
---- ---- ---- ----
DPS 0x80 ID1 ID0 TSL 0x10
0x08 SEL 0x01
PCON 0x80 SMOD_0 SMOD0 0x10
0x08 GF1 GF0 STOP IDLE 0x01
TMOD 0x80 T1GATE T1C_T T1M1 T1M0 0x10
0x08 T0GATE T0C_T T0M1 T0M0 0x01
CKCON 0x80 WD1 WD0 T2M T1M 0x10
0x08 T0M MD2 MD1 MD0 0x01
RCON 0x80 0x10
0x08 CKRDY RGMD RGSL BGS 0x01
PMR 0x80 CD1 CD0 SWB CTM 0x10
0x08 4X_2X ALEOFF DEM1 DEM0 0x01
ADCON1 0x80 STRT_BSY EOC CONT_SS ADEX 0x10
0x08 WCQ WCM ADON WCIO 0x01
ADCON2 0x80 OUTCF MUX2 MUX1 MUX0 0x10
0x08 APS3 APS2 APS1 APS0 0x01
T2CON 0x80 TF2 EXF2 RCLK TCLK 0x10
0x08 EXEN2 TR2 CT2 CPRL2 0x01
T2MOD 0x80 0x10
0x08 T2OE DCEN 0x01
PORT5 0x80 ADC7 ADC6 ADC5 ADC4 0x10
0x08 ADC3 ADC2 ADC1 ADC0 0x01
ROMSIZE 0x80 0x10
0x08 RMS2 RMS1 RMS0 0x01
STATUS 0x80 PIP HIP LIP XTUP 0x10
0x08 SPTA1 SPRA1 SPTA0 SPRA0 0x01
PWMADR 0x80 ADRS 0x10
0x08 PWE1 PWE0 0x01
PW01CS 0x80 PW0S2 PW0S1 PW0S0 PW0EN 0x10
0x08 PW1S2 PW1S1 PW1S0 PW1EN 0x01
PW23CS 0x80 PW2S2 PW2S1 PW2S0 PW2EN 0x10
0x08 PW3S2 PW3S1 PW3S0 PW3EN 0x01
PW01CON 0x80 PW0F PW0DC PW0OE PW0T_C 0x10
0x08 PW1F PW1DC PW1OE PW1T_C 0x01
PW23CON 0x80 PW2F PW2DC PW2OE PW2T_C 0x10
0x08 PW3F PW3DC PW3OE PW3T_C 0x01
T2SEL 0x80 TF2S TF2BS TF2B 0x10
0x08 T2P1 T2P0 0x01
CTCON 0x80 _CT3 CT3 _CT2 CT2 0x10
0x08 _CT1 CT1 _CT0 CT0 0x01
SETR 0x80 TGFF1 TGFF0 CMS5 CMS4 0x10
0x08 CMS3 CMS2 CMS1 CMS0 0x01
RSTR 0x80 CMTE1 CMTE0 CMR5 CMR4 0x10
0x08 CMR3 CMR2 CMR1 CMR0 0x01
PORT6 0x80 STADC PWMC1 PWMC0 0x10
AS8XCXXX ASSEMBLER PAGE M-37
DS83C550/DS87C550 SPECIAL FUNCTION REGISTERS
0x08 PWMO3 PWMO2 PWMO1 PWMO0 0x01
WDCON 0x80 SMOD_1 POR EPF1 PF1 0x10
0x08 WDIF WTRF EWT RWT 0x01
Alternates:
PCON 0x80 SMOD 0x10
0x08 0x01
T2CON 0x80 0x10
0x08 C_T2 _RL2 0x01
APPENDIX N
ASZ80 ASSEMBLER
N.1 .hd64 DIRECTIVE
Format:
.hd64
The .hd64 directive enables processing of the HD64180 specific
mnemonics not included in the Z80 instruction set. HD64180
mnemonics encountered without the .hd64 directive will be
flagged with an 'o' error.
N.2 Z80 REGISTER SET AND CONDITIONS
The following is a complete list of register designations and
condition mnemonics:
byte registers - a,b,c,d,e,h,l,i,r
register pairs - af,af',bc,de,hl
word registers - pc,sp,ix,iy
C - carry bit set
M - sign bit set
NC - carry bit clear
NZ - zero bit clear
P - sign bit clear
PE - parity even
PO - parity odd
Z - zero bit set
ASZ80 ASSEMBLER PAGE N-2
Z80 INSTRUCTION SET
N.3 Z80 INSTRUCTION SET
The following tables list all Z80/HD64180 mnemonics recog-
nized by the ASZ80 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
the format for each addressing mode supported by ASZ80:
#data immediate data
byte or word data
n byte value
rg a byte register
a,b,c,d,e,h,l
rp a register pair
bc,de,hl
(hl) implied addressing or
register indirect addressing
(label) direct addressing
offset(ix) indexed addressing with
an offset
label call/jmp/jr label
The terms data, dir, offset, and ext may all be expressions.
The terms dir and offset are not allowed to be external refer-
ences.
Note that not all addressing modes are valid with every in-
struction, refer to the Z80/HD64180 technical data for valid
modes.
ASZ80 ASSEMBLER PAGE N-3
Z80 INSTRUCTION SET
N.3.1 Inherent Instructions
ccf cpd
cpdr cpi
cpir cpl
daa di
ei exx
halt neg
nop reti
retn rla
rlca rld
rra rrca
rrd scf
N.3.2 Implicit Operand Instructions
adc a,[] adc []
add a,[] add []
and a,[] and []
cp a,[] cp []
dec a,[] dec []
inc a,[] inc []
or a,[] or []
rl a,[] rl []
rlc a,[] rlc []
rr a,[] rr []
rrc a,[] rrc []
sbc a,[] sbc []
sla a,[] sla []
sra a,[] sra []
srl a,[] srl []
sub a,[] sub []
xor a,[] xor []
ASZ80 ASSEMBLER PAGE N-4
Z80 INSTRUCTION SET
N.3.3 Load Instruction
ld rg,[] ld [],rg
ld (bc),a ld a,(bc)
ld (de),a ld a,(de)
ld (label),a ld a,(label)
ld (label),rp ld rp,(label)
ld i,a ld r,a
ld a,i ld a,r
ld sp,hl ld sp,ix
ld sp,iy ld rp,#data
ldd lddr
ldi ldir
N.3.4 Call/Return Instructions
call C,label ret C
call M,label ret M
call NC,label ret NC
call NZ,label ret NZ
call P,label ret P
call PE,label ret PE
call PO,label ret PO
call Z,label ret Z
call label ret
N.3.5 Jump and Jump to Subroutine Instructions
jp C,label jp M,label
jp NC,label jp NZ,label
jp P,label jp PE,label
jp PO,label jp Z,label
jp (hl) jp (ix)
jp (iy) jp label
djnz label
jr C,label jr NC,label
jr NZ,label jr Z,label
jr label
ASZ80 ASSEMBLER PAGE N-5
Z80 INSTRUCTION SET
N.3.6 Bit Manipulation Instructions
bit n,[]
res n,[]
set n,[]
N.3.7 Interrupt Mode and Reset Instructions
im n
im n
im n
rst n
N.3.8 Input and Output Instructions
in a,(n) in rg,(c)
ind indr
ini inir
out (n),a out (c),rg
outd otdr
outi otir
N.3.9 Register Pair Instructions
add hl,rp add ix,rp
add iy,rp
adc hl,rp sbc hl,rp
ex (sp),hl ex (sp),ix
ex (sp),iy
ex de,hl
ex af,af'
push rp pop rp
ASZ80 ASSEMBLER PAGE N-6
Z80 INSTRUCTION SET
N.3.10 HD64180 Specific Instructions
in0 rg,(n)
out0 (n),rg
otdm otdmr
otim otimr
mlt bc mlt de
mlt hl mlt sp
slp
tst a
tstio #data
APPENDIX O
ASGB ASSEMBLER
O.1 ACKNOWLEDGEMENT
Thanks to Roger Ivie for his contribution of the ASGB cross
assembler.
Roger Ivie
ivie@cc.usu.edu
O.2 INTRODUCTION
The Gameboy uses an 8-bit processor which is closely related
to the 8080. It is usually described as a modified Z80, but may
be more closely understood as an enhanced 8080; it has the 8080
register set and many, but not all, enhanced Z80 instructions.
However, even this is not accurate, for the Gameboy also lacks
some basic 8080 instructions (most annoyingly SHLD and LHLD).
ASGB is based on ASZ80 and therefore uses the Z80 mnemonic set.
O.3 GAMEBOY REGISTER SET AND CONDITIONS
The following is a complete list of register designations and
condition mnemonics:
byte registers - a,b,c,d,e,h,l
register pairs - af, bc, de, hl
word registers - pc, sp
C - carry bit set
NC - carry bit clear
NZ - zero bit clear
Z - zero bit set
ASGB ASSEMBLER PAGE O-2
GAMEBOY INSTRUCTION SET
O.4 GAMEBOY INSTRUCTION SET
The following tables list all Gameboy mnemnoics recognized by
the ASGB assembler. The designation [] refers to a required ad-
dressing mode argument. The following list specifies the format
for each addressing mode supported by ASGB:
#data immediate data
byte or word data
n byte value
rg a byte register
a,b,c,d,e,h,l
rp a register pair or 16-bit register
bc,de,hl
(hl) implied addressing or
register indirect addressing
(label) direct addressing
label call/jmp/jr label
The terms data, dir, and ext may all be expression. The term
dir is not allowed to be an external reference.
Note that not all addressing modes are valid with every in-
struction. Although official information is not, as far as I
know, publically available for the Gameboy processor, many unof-
ficial sources are available on the internet.
O.4.1 .tile Directive
Format: .tile /string/
where: string is a string of ascii characters taken from the
set ' ', '.', '+', '*', '0', '1', '2', and '3'.
The string must be a multiple of eight
characters long.
/ / represent the delimiting characters. These
delimiters may be any paired printing
characters, as long as the characters are not
contained within the string itself. If the
delimiting characters do not match, the .tile
directive will give the (q) error.
ASGB ASSEMBLER PAGE O-3
GAMEBOY INSTRUCTION SET
The Gameboy displays information on the screen using a pro-
grammable character set (referred to as "tiles" among Gameboy
developers). The ASGB cross assembler has a processor-specific
assembler directive to aid in the creation of the game's
character set.
Each character is created from an 8x8 grid of pixels, each
pixel of which is composed of two bits. The .tile directive ac-
cepts a single string argument which is processed to create the
byte values corresponding to the lines of pixels in the
character. The string argument must be some multiple of 8
characters long, and be one of these characters:
' ' or '0' - for the pixel value 00
'.' or '1' - for the pixel value 01
'+' or '2' - for the pixel value 10
'*' or '3' - for the pixel value 11
The .tile directive processes each 8-character group of its
string argument to create the two-byte value corresponding to
that line of pixels. The example in the popular extant litera-
ture could be done using ASGB like this:
0000 7C 7C 1 .tile " ***** "
0002 00 C6 2 .tile "++ ++ "
0004 C6 00 3 .tile ".. .. "
0006 00 FE 4 .tile "+++++++ "
0008 C6 C6 5 .tile "** ** "
000A 00 C6 6 .tile "++ ++ "
000C C6 00 7 .tile ".. .. "
000E 00 00 8 .tile " "
Or, using the synonym character set, as:
0010 7C 7C 10 .tile "03333300"
0012 00 C6 11 .tile "22000220"
0014 C6 00 12 .tile "11000110"
0016 00 FE 13 .tile "22222220"
0018 C6 C6 14 .tile "33000330"
001A 00 C6 15 .tile "22000220"
001C C6 00 16 .tile "11000110"
001E 00 00 17 .tile "00000000"
Since .tile is perfectly willing to assemble multiple lines
of a character at once (as long as it is given complete rows of
pixels), it could even be done as:
.tile " ***** ++ ++ .. .. +++++++ "
.tile "** ** ++ ++ .. .. "
ASGB ASSEMBLER PAGE O-4
GAMEBOY INSTRUCTION SET
O.4.2 Potentially Controversial Mnemonic Selection
Although the Gameboy processor is based on the Z80, it does
include some features which are not present in the Z80. The Z80
mnemonic set is not sufficient to describe these additional
operations; mnemonics must be created for the new operations.
The mnemonics ASGB uses are not the same as those used by other
publically-available Gameboy assemblers.
O.4.2.1 Auto-Indexing Loads -
The Gameboy provides instructions to load or store the ac-
cumulator indirectly via HL and then subsequently increment or
decrement HL. ASGB uses the mnemonic 'ldd' for the instructions
which decrement HL and 'ldi' for the instructions which incre-
ment HL. Because the Gameboy lacks the Z80's block moves, the
mnemonics are not otherwise needed by ASGB.
ldd a,(hl) ldd (hl),a
ldi a,(hl) ldi (hl),a
O.4.2.2 Input and Output Operations -
The Gameboy replaces the Z80's separate address space for
I/O with a mechanism similar to the zero page addressing of pro-
cessors such as the 6800 or 6502. All I/O registers in the
Gameboy reside in the address range between 0xff00 and 0xffff.
The Gameboy adds special instructions to load and store the ac-
cumulator from and into this page of memory. The instructions
are analogous to the Z80's in and out instructions and ASGB re-
tains the 'in' and 'out' mnemonics for them.
in a,(n) out (n),a
in a,(c) out (c),a
From ASGB's perspective, the RAM available from 0xff80
through 0xffff is composed of unused I/O locations rather than
direct-page RAM.
ASGB ASSEMBLER PAGE O-5
GAMEBOY INSTRUCTION SET
O.4.2.3 The 'stop' Instruction -
The publically-available documentation for the Gameboy
lists the 'stop' instruction as the two-byte instruction 10 00,
and the other freely-available Gameboy assemblers assemble it in
that manner. As far as I can tell, the only rationale for this
is that the corresponding Z80 instruction ('djnz label') is a
two-byte instruction. ASGB assembles 'stop' as the one-byte in-
struction 10.
O.4.3 Inherent Instructions
ccf cpl
daa di
ei nop
halt rla
rlca rra
rrca scf
reti stop
swap
O.4.4 Implicit Operand Instructions
adc a,[] adc []
add a,[] add []
and a,[] and []
cp a,[] cp []
dec a,[] dec []
inc a,[] inc []
or a,[] or []
rl a,[] rl []
rlc a,[] rlc []
rr a,[] rr []
rrc a,[] rrc []
sbc a,[] sbc []
sla a,[] sla []
sra a,[] sra []
srl a,[] srl []
sub a,[] sub []
xor a,[] xor []
ASGB ASSEMBLER PAGE O-6
GAMEBOY INSTRUCTION SET
O.4.5 Load Instructions
ld rg,[] ld [],rg
ld (bc),a ld a,(bc)
ld (de),a ld a,(de)
ld (label),a ld a,(label)
ld (label),sp ld rp,#data
ld sp,hl ld hl,sp
ldd a,(hl) ldd (hl),a
ldi a,(hl) ldi (hl),a
O.4.6 Call/Return Instructions
call C,label ret C
call NC,label ret NC
call Z,label ret Z
call NZ,label ret NZ
call label ret
rst n
O.4.7 Jump Instructions
jp C,label jp NC,label
jp Z,label jp NZ,label
jp (hl) jp label
jr C,label jr NC,label
jr Z,label jr NZ,label
jr label
O.4.8 Bit Manipulation Instructions
bit n,[]
res n,[]
set n,[]
ASGB ASSEMBLER PAGE O-7
GAMEBOY INSTRUCTION SET
O.4.9 Input and Output Instructions
in a,(n) in a,(c)
out (n),a out (c),a
O.4.10 Register Pair Instructions
add hl,rp add hl,sp
add sp,#data
push rp pop rp
APPENDIX P
AS6500 ASSEMBLER
P.1 ACKNOWLEDGMENT
Thanks to Marko Makela for his contribution of the AS6500
cross assembler.
Marko Makela
Sillitie 10 A
01480 Vantaa
Finland
Internet: Marko.Makela@Helsinki.Fi
EARN/BitNet: msmakela@finuh
Several additions and modifications were made to his code
to support the following families of 6500 processors:
(1) 650X and 651X processor family
(2) 65F11 and 65F12 processor family
(3) 65C00/21 and 65C29 processor family
(4) 65C02, 65C102, and 65C112 processor family
The instruction syntax of this cross assembler contains two
peculiarities: (1) the addressing indirection is denoted by the
square brackets [] and (2) the `bbrx' and `bbsx' instructions
are written `bbr0 memory,label'.
AS6500 ASSEMBLER PAGE P-2
6500 REGISTER SET
P.2 6500 REGISTER SET
The following is a list of the 6500 registers used by AS6500:
a - 8-bit accumulator
x,y - index registers
P.3 6500 INSTRUCTION SET
The following tables list all 6500 family mnemonics recog-
nized by the AS6500 assembler. The designation [] refers to a
required addressing mode argument. The following list specifies
the format for each addressing mode supported by AS6500:
#data immediate data
byte or word data
*dir direct page addressing
(see .setdp directive)
0 <= dir <= 255
offset,x indexed addressing
offset,y indexed addressing
address = (offset + (x or y))
[offset,x] pre-indexed indirect addressing
0 <= offset <= 255
address = contents of location
(offset + (x or y)) mod 256
[offset],y post-indexed indirect addressing
address = contents of location at offset
plus the value of the y register
[address] indirect addressing
ext extended addressing
label branch label
address,label direct page memory location
branch label
bbrx and bbsx instruction addressing
The terms data, dir, offset, address, ext, and label may all be
expressions.
Note that not all addressing modes are valid with every in-
struction, refer to the 65xx technical data for valid modes.
AS6500 ASSEMBLER PAGE P-3
6500 INSTRUCTION SET
P.3.1 Processor Specific Directives
The AS6500 cross assembler has four (4) processor specific
assembler directives which define the target 65xx processor
family:
.r6500 Core 650X and 651X family (default)
.r65f11 Core plus 65F11 and 65F12
.r65c00 Core plus 65C00/21 and 65C29
.r65c02 Core plus 65C02, 65C102, and 65C112
P.3.2 65xx Core Inherent Instructions
brk clc
cld cli
clv dex
dey inx
iny nop
pha php
pla plp
rti rts
sec sed
sei tax
tay tsx
txa txs
tya
P.3.3 65xx Core Branch Instructions
bcc label bhs label
bcs label blo label
beq label bmi label
bne label bpl label
bvc label bvs label
P.3.4 65xx Core Single Operand Instructions
asl []
dec []
inc []
lsr []
rol []
ror []
AS6500 ASSEMBLER PAGE P-4
6500 INSTRUCTION SET
P.3.5 65xx Core Double Operand Instructions
adc []
and []
bit []
cmp []
eor []
lda []
ora []
sbc []
sta []
P.3.6 65xx Core Jump and Jump to Subroutine Instructions
jmp [] jsr []
P.3.7 65xx Core Miscellaneous X and Y Register Instructions
cpx []
cpy []
ldx []
stx []
ldy []
sty []
AS6500 ASSEMBLER PAGE P-5
6500 INSTRUCTION SET
P.3.8 65F11 and 65F12 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
smb6 [] smb7 []
P.3.9 65C00/21 and 65C29 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
bra label
phx phy
plx ply
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
smb6 [] smb7 []
AS6500 ASSEMBLER PAGE P-6
6500 INSTRUCTION SET
P.3.10 65C02, 65C102, and 65C112 Specific Instructions
bbr0 [],label bbr1 [],label
bbr2 [],label bbr3 [],label
bbr4 [],label bbr5 [],label
bbr6 [],label bbr7 [],label
bbs0 [],label bbs1 [],label
bbs2 [],label bbs3 [],label
bbs4 [],label bbs5 [],label
bbs6 [],label bbs7 [],label
bra label
phx phy
plx ply
rmb0 [] rmb1 []
rmb2 [] rmb3 []
rmb4 [] rmb5 []
rmb6 [] rmb7 []
smb0 [] smb1 []
smb2 [] smb3 []
smb4 [] smb5 []
smb6 [] smb7 []
stz []
trb []
tsb []
Additional addressing modes for the following core instruc-
tions are also available with the 65C02, 65C102, and 65C112 pro-
cessors.
adc [] and []
cmp [] eor []
lda [] ora []
sbc [] sta []
bit [] jmp []
dec inc