Last Revised AST RESEARCH, INC. INFORMATIONAL BULLETIN # 0054 10/14/97 TITLE: AST Display Quality Standard SUMMARY This document serves as a guide to determine acceptable defect criteria of the AST 13.3" TFT display. This bulletin refers to mobile systems using the AST 13.3" TFT display panel. NOTES AST specification defines a section called "Display Appearance Inspection Criteria" which outlines the maximum allowed defects. Appearance criteria for the AST 13.3" Display Panel: Line of View shall be at 90 degrees. Max. Defect Pixels Allowed Bright Dot/Single Random 11 Green 5 Two Adjacent (Connected) 2 Dark Dot/Single Random 11 Two Adjacent 4 Three Adjacent 3 Four or More Adjacent Not Allowed Total Defect Pixels Allowed on a Panel: 21 or less combined single and multiple dots Minimum Distance Between Defects: Bright Dot to Bright Dot 15mm Dark Dot to Dark Dot 5mm Definitions: Bright/Dark Dot - A sub-pixel (R, G, B, dot) stuck ON/OFF Multiple connected dots - Seen as small scratch/line or large dot. TAN N/A --------------------------------------------------------------------- The information in this data sheet is subject to change without notice. AST Research, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This material contains information protected by copyright. No part of this material may be reproduced in any form without prior written consent from AST Research, Inc. All rights reserved. --------------------------------------------------------------------- Template Rev 02