============================================================================= AST RESEARCH, INC. SOFTWARE BULLETIN #0076B 11-28-90 ============================================================================= AST-VGA PLUS UTILITIES SOFTWARE Production Release 3.03 Available November, 1990 Part Number: 910417-001 5.25 inch, 1.2MB diskette 910417-031 3.50 inch, 760KB diskette Please note: The part number has changed from the previous release of these utilities (see below). Includes enhancements and problem fixes of previous versions plus the following: ENHANCEMENTS: - VGA now supports IBM PS/2 display modes of the VGA standard. This implies the ability to use either VGA color or VGA monochrome displays interchangeably with software applications. These utilities are to be used in conjunction with release 3.10 of the VGA Plus BIOS (part numbers 107000-682 and 107000-683). - Added 800x600 drivers for Windows 3.0, WordPerfect 5.0 and Autocad release 9 and 10. - Added driver PVGA480.DRV for support of Windows 3.0 640 x 480 resolution. Updated SETUP.INF to include above driver. Production Release 3.01A Available October, 1989 Part Number: 910373-001 5.25 inch diskette 1 of 4 910373-002 5.25 inch diskette 2 of 4 910373-003 5.25 inch diskette 3 of 4 910373-004 5.25 inch diskette 4 of 4 910373-031 3.50 inch diskette 1 of 2 910373-032 3.50 inch diskette 2 of 2 PROBLEMS RESOLVED: - Use of 800x600 resolution mode with AutoCad release 9 was not fully supported. The optional "pull-down" menus would not operate. (PR#B47001) - No 800x600 resolution mode was available with the previous utilities for AutoCad release 10. (PR#B47013) - Support did not exist in the utilities for the application GEM version 2.1 in 800x600 mode. (PR#B47015) Production Release 1.03 Available September, 1988 Part Number: 910243-001 5.25 inch diskette 1 of 2 910243-002 5.25 inch diskette 2 of 2 PROBLEMS RESOLVED: - Resolved problems with Windows drivers. - Resolved problem with FASTVGA.SYS. In previous version, if FASTVGA was installed in the system, the program FASTVGA.SYS could not be copied from any source to any destination or the system would hang. (PR#B47002) - The diagnostics now report the correct switch settings of the VGA Plus adapter. (PR#B47003) Production Release 1.02 Available June, 1988 ENHANCEMENTS: - The utility FASTVGA.SYS was added to the diskette. Production Release 1.00 Available April, 1988 This is the initial release of the software.