===================================================================== Last Revised AST RESEARCH, INC. SOFTWARE BULLETIN # 0304 09/30/97 ===================================================================== TITLE: EtherExpress PRO100B Drivers, v 2.53 FILENAME(S) / PART NUMBER(S) / DESCRIPTION(S): 12916033.EXE / 912916-033 EtherExpress PRO100B Drivers, v 2.4 12916034.EXE / 912916-034 EtherExpress PRO100B Drivers, v 2.53 SUMMARY File 12916034.EXE contains version 2.53, disk 1 of 1, of the Intel EtherExpress PRO/100B LAN adapter configuration and driver diskette (AST part number 234510-001). This software applies to the following systems: 501832, 501952, 501954, 501972, 503057, 503058, 503074, 503076, 503120, 503125, 503195, 503196, 503212, 503213, 503270, 503275, 503276, 503277, 503278, 503281, 503282, 503426, 503427, and 503478. RESOLUTIONS N/A ENHANCEMENTS Version 2.53 contains the following enhancement: Added the install section for the PRO/100 WFM PCI adapter. PREVIOUS RELEASE(S) Version 2.4 contained the following issue resolutions: Changed from National Semi 840A to Intel 82555 physical layer chip. Changed from B-step to C-step 82557 Mac which incorporated the following: 1. Support of the SubSystem ID and SubSystem Vendor ID PCI configuration fields for PC97 compliance. 2. Improved PCI electrical response to avoid voltage reflection anomaly. ------------------------------------------------------- Version 2.30 contained the following issue resolutions and enhancements: Changes from v1.00 to v2.03 Change the National Semiconductor physical interface component from the DP83840 to DP83840A. The DP83840A includes modifications to update standards compliance from IEEE 802.3u/D2 to IEEE 802.3u/D5.3, improved power management, and other enhancements and corrections from its predecessor. 573 to 373 This is an 8-bit latch which supports the boot ROM upgrade option. The 373 part is a functional equivalent. Move from two clock sources to one. The addition of a single 50MHz oscillator provides greater accuracy and better aligns the PRO/100B adapter with National Semiconductor's revised design recommendations. New Drivers The 2.5 PRO/100 driver release includes modifications to the DOS and Windows diagnostic software to accommodate a change in link time found in the new physical interface component. This software modification is fully backward compatible with older models of the PRO/100B, but the new drivers are required on adapters with the DP83840A physical interface component. NOTES This diskette is used to update the BIOS for Intel EtherExpress. To install this driver, please read the installation procedure on the diskette under INFO\MS directory. For information on installing this update, please view the README.TXT file that accompanies the update. You can download this file from the following services: AST WWW Site: http://www.ast.com AST On-Line! BBS*: See IB0001.TXT CompuServe: GO: ASTFORUM Prodigy: JUMP: ASTSUPPORT * Refer to IB0001.TXT for a list of AST's international BBS numbers. To decompress this file, create a temporary directory on your hard drive, copy the downloaded file to that directory, and run the file. TAN N/A --------------------------------------------------------------------- The information in this data sheet is subject to change without notice. AST Research, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This material contains information protected by copyright. No part of this material may be reproduced in any form without prior written consent from AST Research, Inc. All rights reserved. --------------------------------------------------------------------- Template Rev 02