AST RESEARCH, INC.         TECHNICAL BULLETIN #0851               08-04-93




               BRAVO LC 4/66 WITH LOTUS 123 v2.4 WILL NOT BEEP


PROBLEM:       Lotus 123 version 2.4 will not beep if loaded on a Bravo LC
               4/66.

CAUSE:         The fault lies within the Lotus program.  The software signals
               sent out are not quick enough for the system to interpret
               them.

AFFECTED
SYSTEMS:       Bravo LC 4/66.

SOLUTION:      None. Lotus is aware of the problem but is not going to fix
               this particular version.  Slowing the machine down when
               running the program was their only suggestion.