AST RESEARCH, INC.           TECHNICAL BULLETIN #0898                2-10-94




                    CUPID SYSTEMS LOOPBACK PLUG SCHEMATIC


PROBLEM:       There should be a jumper shown between pins 2 and 3 in the 9-
               Pin Serial Loopback Plug schematic on page 8 of the manual.
               Only the schematic is at fault, the jumper exists in the
               physical plug.

CAUSE:         Incorrect diagram.  AST Advanced Diagnostics Supplement, part
               number 001239-001 A.

SYSTEMS
AFFECTED:      AST Cupid Systems.

SOLUTION:      Future releases of the supplement will correct and update the
               drawing.