=

AST RESEARCH, INC.        TECHNICAL BULLETIN # 1102                 3-15-95

=


			  INCORRECT BRAVO MS SPEED JUMPER SETTINGS


PROBLEM

The Bravo MS Hardware Maintenance Manual (P/N 002092-001, section 3-2) and the 
User's Manuals (P/N 002115-001, page 59) incorrectly state the E9 jumper 
settings as:

	ON= 33MHz
	OFF= 25MHz

CAUSE

Print error.

SYSTEMS AFFECTED
AST PART NUMBER AND DESCRIPTION

501442-XXX     BRAVO MS 4-66D
501443-XXX     BRAVO MS 4-100T
501586-XXX     BRAVO MS-L 4-66D
501658-XXX     BRAVO MS-T 4-66D

SOLUTION

The following are the correct jumper settings:

E9 Jumper:
	ON= 25MHZ
	OFF= 33MHz

E6   E7 Jumper
1/2  1/2  25MHz
1/2  2/3  33MHz
All other combinations are reserved.