AST RESEARCH, INC.        TECHNICAL BULLETIN # 1632          12/04/96 
 
 
 
TITLE:  French Adv!7303 CompuServe WinCIM Setup
 
 
ISSUE 
 
   While creating the French version 2.0.1 of "Compuserve WinCIM 
   Setup disks" (which requires 2 disks) using AST Disk Utility 
   (ASTDU), the system may be unable to complete the copy of disk 2. 
   The system may display the following error message:
   
     Une erruer s'est produite lors du transfert de fichiers
     sur la disquette dans le lecteur A
    
   This issue affects the following systems:  503092-004, 503094-004  
   503092-005, 503094-005.    

 
BACKGROUND 
 
   An error occurs in the CompuServe MSCSDXX.INI file.    

 
ACTION 
 
   To create a copy of Disk 2, perform the following steps:
   
   1. Open a DOS Window and insert a formatted diskette in 
      floppy drive A:.
   
   2. Type the following :
   
       COPY C:\BACKUP\WINCIM\DISK_2 *.* A: 
   
       and press the [Enter] key.
   
   3. When the copy is complete, remove the diskette and 
      label it WinCIM version 2.0.1 F Disk 2.    

 
NOTES 
 
   N/A    

 
TAN EPR 900JM 
 
--------------------------------------------------------------------- 
The information in this data sheet is subject to change without  
notice. AST Research, Inc. shall not be liable for technical or  
editorial errors or omissions contained herein; nor for incidental or  
consequential damages resulting from the furnishing, performance,  
or use of this material. This material contains information protected  
by copyright. No part of this material may be reproduced in any form 
without prior written consent from AST Research, Inc.  
All rights reserved. 
--------------------------------------------------------------------- 
01