AST RESEARCH, INC. TECHNICAL BULLETIN # 1658 01/28/97 TITLE: Ascentia 950N, P NT 4.0 Video Drivers ISSUE Under Windows NT 4.0, an Ascentia 950N or an Ascentia P may exhibit corruption on the LCD display panel. This issue will usually occur on systems with DSTN (Passive Matrix) LCD display panels. This issue affects the following systems: 501707, 501708, 501741, 501742, 501743, 501744, 501897, 501898, 501905, 501996, 501997, 503039, and 503041. BACKGROUND The Ascentia 950N and early Ascentia P systems use the Cirrus 7543 video controller. Later production Ascentia P systems use the Cirrus 7548 video controller. ACTION Download the Windows NT 4.0 video drivers from the Cirrus Logic BBS at 510-440-9080 and update your system's video drivers. Before downloading a new video driver, determine the video controller in your system. The following units have the 7543 controller: 501707, 501708, 501897, 501898, 501741, 501742, 501743, 501744, 501905, 501996, 501997. For these systems download version 2.40a or higher. The following units have the 7548 controller: 503039 and 503041. For these systems download version 1.40 or higher. For systems with the 7543 controller, download filename K7543nt4.ZIP. For systems with the 7548 controller, download filename K7548D7.ZIP. NOTES N/A TAN 000956JB --------------------------------------------------------------------- The information in this data sheet is subject to change without notice. AST Research, Inc. shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. This material contains information protected by copyright. No part of this material may be reproduced in any form without prior written consent from AST Research, Inc. All rights reserved. --------------------------------------------------------------------- Revision 01