Last Revised
AST RESEARCH, INC.        TECHNICAL BULLETIN # 1792          01/13/98 
 
 
 
TITLE:  Bravo EL 6233/6266/6300 & LDCM message
 
 
ISSUE 
 
   Adding or removing hardware on the Bravo EL 6233, 6266, and 6300 
   systems causes the LANDesk Client Manager (LDCM) to recognize 
   this action, generating the following warning message on the next 
   bootup:
   
     "Timed out waiting for INIT COMPLETE message from
     c:\Program Files\Intel\LDCM\CI\IA\ciaMngr.exe" 
   
   This issue affects the following systems: 503571, 503575, 503599, 
   and 503600. This issue may affect any system using LANDesk Client 
   Manager.    

 
BACKGROUND 
 
   This LDCM message notification is normal and it takes place 
   whenever the hardware changes in the system.    

 
ACTION 
 
   Upon receiving this message, click the "OK" button to continue 
   the boot process. Configure the new hardware and its drivers. 
   Once this is accomplished, the message will not occur on 
   subsequent boot up cycles.    

 
NOTES 
 
   This message is similar to the Windows 95 message which states 
   that the hardware has changed.    

 
TAN OPR#259LC 
 
--------------------------------------------------------------------- 
The information in this data sheet is subject to change without  
notice. AST Research, Inc. shall not be liable for technical or  
editorial errors or omissions contained herein; nor for incidental or  
consequential damages resulting from the furnishing, performance,  
or use of this material. This material contains information protected  
by copyright. No part of this material may be reproduced in any form 
without prior written consent from AST Research, Inc.  
All rights reserved. 
--------------------------------------------------------------------- 
Template Rev 02