MP-II AST Part Number 202033-xxx The MP-II board is a Memory Expansion board designed for the IBM PCs and XTs and 100% compatibles running at 4.77 MHz. It can be configured to hold between 64K and 384K of conventional memory using industry standard 64K Dynamic RAM memory chips. In addition to any installed memory, the MP-II comes complete with a Clock/Calendar. The MP-II cannot expand your computer beyond 640K and does not support Extended Memory or EMS/EEMS memory. SWITCH SETTINGS STARTING ADDRESS MEMORY INSTALLED ON MP II S1 S2 S3 S4 S5 S6 --- --- --- --- --- --- 64K OFF OFF OFF 0K OFF OFF OFF 128K OFF OFF ON 64K OFF OFF ON 192K OFF ON OFF 128K OFF ON OFF 256K OFF ON ON 192K OFF ON ON 320K ON OFF OFF 256K ON OFF OFF 384K ON OFF ON 320K ON OFF ON 448K ON ON OFF 384K ON ON OFF 512K ON ON ON S7 - NOT USED S8 - Parity Enable (Recommended to be set ON at all times) JUMPER SETTINGS Location "CS" Installed - Clock Enabled Removed - Clock Disabled SWITCH AND JUMPER LOCATION +---------------------------------------------------------------+ +--- | +-+ | ON +-------+ | | | | S1-S8 | BATT | | | OFF +-------+ | | | SW-1 | | | | | | CLOCK | | | SELECT * | | | JUMPER | | | +-+ +---------------------------------------------+ +----+ | +------------+ | |