Jumper setting for KW559b

JP1:	HDD indicator
JP3:	Select the IDE drive speed grade
	
	2 4 6
	1 3 5
	
	4-6 and 3-5 close :	Speed 0 (default)
	4-6 and 1-3 close :	Speed 1
	2-4 and 1-3 close :	Speed 2

JP4: used to select the IRQ level corresponding to COMA, COMB and PARALLEL

	2  4  6  8  10  12  14  16  18  20
	1  3  5  7   9   11  13  15  17  19

	COMA	:
		1-2	close:		IRQ3
		3-4	close:		IRQ4	(default)
		5-6	close:		IRQ5
		7-8	close:		IRQ9
	COMB	:
		9-10	close:		IRQ3	(default)
		11-12	close:		IRQ4	
		13-14	close:		IRQ5
		15-16	close:		IRQ9
	PARALLEL:
		17-18 	close:		IRQ7	(default)
		19-20	close:		IRQ5

JP5:Parallel port direction select.
	1
	2
	3
	
	1-2	close:	input/output mode (default)
	2-3	close:	output only

JP6: Game port enable
	2  4
	1  3

	1-2 and 3-4 close:	enable game port (default)
	all open:		disable game port

JP7: used to select the I/O address of COMA , COMB and parallel port.

	2  4  6  8  10  12  14  16  18  20  22
	1  3  5  7   9   11  13  15  17  19  21

	COMA	:
		1-2	close:		3F8H	(default)
		3-4	close:		2F8H
		5-6	close:		3E8H
		7-8	close:		2E8H
	COMB	:
		9-10	close:		3F8H
		11-12	close:		2F8H	(default)
		13-14	close:		3E8H
		15-16	close:		2E8H
	PARALLEL:
		17-18 	close:		3BCH
		19-20	close:		378H	(default)
		21-22	close:		278H

JP8: used to enable (disable) and select corresponding I/O address of FDC.
	
	6  5
	4  3
            2  1

	1-3 close:	disable FDC
	2-4 and 3-5 close:	enable FDC and select 3F0-7H (default)
	4-6 and 3-5 close:	enable FDC and select 370-7H

--- Fin --