Component list for Revision 1 of the XT-IDE card



Qty  Item 	
------------------------------------------------------
1    XT-IDE REV01 PRINTED CIRCUIT BOARD (PCB)
10   CAPACITOR, CERAMIC, 0.1uF                  (decoupling caps for ICs) (10V or above)	
1    CAPACITOR, ELECTROLYTIC, RADIAL, 47uF      (10V or above)
2    IC, 74HCT688 	
1    IC, 74LS04 	
1    IC, 74LS138 	
1    IC, 74LS32 	
1    IC, 74F245
3    IC, 74F573
1    Atmel EEPROM IC, 28C64 (get it from mouser, or CALL Jameco to verify they will supply Atmel, not SEEQ or Samsung EEPROMs!)
2    SOCKET, IC, 14-PIN
6    SOCKET, IC, 20-PIN 
1    SOCKET, IC, 28-PIN
1    SOCKET, IC, 16-PIN
3    JUMPERS
1    RESISTOR, CARBON FILM, 150 OHM, 1/4 WATT, 5%
6    RESISTOR, CARBON FILM, 10K OHM, 1/4 WATT, 5% 	
2    MOLDED SIP, 9-PIN, BUSSED, 10K, 2%
1    LED, GREEN	
1    SWITCH, DIP, SPST, 8-POS, 16-PIN
 	
1    HEADER, RT MALE, 2RW, 40 CONT
1    HEADER, .1 ST MALE, 2RW, 16-PIN (break off 1 row for use on external LED)
1    HEADER, .1 ST MALE, 1RW, 3-PIN
 	
2    SCREW, PAN HEAD, PPN4-40X1/4 (only available in bags of 100-steal some from another ISA card or go to home depot and get some #4-40 1/4in screws)
1    Keystone 9202 ISA bracket with 2 PCB mounting tabs*