~ 3D Printed Products ~

HOME
My Home Track
D.R.A.W.W.
Slot Car Tips
Scalextric Digital Tips
No-Magnet Racing Tips
Advanced Racing Tips
Instructional Videos
Shared Track Plans
Wood Track Routing Tools
Cars For Sale
Favorite Sites
3D Printed Products

I love 3D printing. It feels like Star Trek! The best part is that I use it to augment my other hobbies, including slot cars. Below you will find an assortment of products that I can 3D print for you. Some are of my own design, and some are shared by other designers. When possible, I will also provide a link to where the files are available, so you can print them yourself if you have access to a 3D printer. If you don't see something below that you're looking for, don't hesitate to send me an email. If there's a model for it, I can probably print it. When you know what you want, contact me by email at ggaub@ggaub.com with your address and what you want to order, and I'll respond with a total cost including shipping and how to pay.

Also check out my Wood Track Routing Tool Products!

MSR Tire Truer Sanding Plate Reciprocation Machine

The MSR Tire Truer Sanding Plate Reciprocation Machine is a simple accessory for your existing MSR Tire Truer machine to automate the motion of the sanding plate for you, so that you can do other things while your tires are being sanded. Connect the gearmotor to the same power as your MSR Tire Truer, or it's own power, either is fine. The gearmotor will slowly move the sanding plate back and forth so that you don't have to. THIS IS NOT A TIRE TRUING MACHINE! You need to already have a MSR Tire Truer for this accessory to be of use to you. Tires should not be left unattended while truing. Refer to the photo to ensure that you are ordering for the correct machine. If you order the wrong reciprocator, that's on you.

Watch the Assembly Video!
Buy an MSR Tire Truer

Price - $35 ea. +Shipping

Tire Razor Sanding Plate Reciprocation Machine

The Tire Razor Sanding Plate Reciprocation Machine is a simple accessory for your existing genuine Tire Razor to automate the motion of the sanding plate for you, so that you can do other things while your tires are being sanded. Connect the gearmotor to the same power as your Tire Razor, or it's own power, either is fine. The gearmotor will slowly move the sanding plate back and forth so that you don't have to. THIS IS NOT A TIRE TRUING MACHINE! You need to already have a genuine Tire Razor for this accessory to be of use to you. Tires should not be left unattended while truing. Refer to the photo to ensure that you are ordering for the correct machine. If you order the wrong one, that's on you.

Watch the Assembly Video!

Price - $35 ea. +Shipping

Tyre True Sanding Plate Reciprocation Machine

The Tyre True Sanding Plate Reciprocation Machine is a simple accessory for your existing Area3 or Professor Motor Tyre True machine to automate the motion of the sanding plate for you, so that you can do other things while your tires are being sanded. Connect the gearmotor to the same power as your Tyre True, or it's own power, either is fine. The gearmotor will slowly move the sanding plate back and forth so that you don't have to. THIS IS NOT A TIRE TRUING MACHINE! You need to already have a Tyre True for this accessory to be of use to you. Tires should not be left unattended while truing. Refer to the photo to ensure that you are ordering for the correct machine. If you order the wrong one, that's on you.

Watch the Assembly Video!

Price - $35 ea. +Shipping



Crash Barriers with Safety Fence

These crash barriers are a great looking way to help keep your cars on the track and your spectators safe. The fence can be printed with the "chain link" in any size and orientation. The wall can flex either direction, or both at once, and the fence can be installed offset any number of slots as you like. They can also be easily shortened by snapping or cutting the sections off. The Walls can connect to the edge of track or borders and has been tested on many different brands of track. If necessary, I can adjust the model for printing to ensure compatibility with other tracks/borders, with the appropriate measurements. While gray is the most common, both the wall and fence can be printed in any color. These are sold as a set of FOUR walls with fences.

Price - $20 ea. +Shipping

Custom Controller Holders

These controller holders are a convenient way to store your slot car controller at your driver station so that you can use both hands for making adjustments to your car, or whenever you're not actively driving your slot car. These can be printed in any color, and easily customised with your name, station number, track name, or anything you'd like it to say on the top face. These will work with most trigger controllers on the market, and can be customized to fit specific controllers if needed. These go great with the driver stations below.

Price - $10 ea. +Shipping

Flat Kerb inserts for Scalextric borders

Did you miss out on the black borders for your Scalextric Classic or Sport track that had the flat kerbs (curbs)? Were you not able to procure enough of them for your layout? Or, do you need a flat kerb that Scalextric never even produced? If you still have the bump kerbs with the red and white stripes, and are tired of your performance cars getting upset by the transition over that bump, then fret no more! Just buy some of these and put them in place of the bump curbs (kerbs).
Please watch this video for proper installation procedure.

Price - 2 for $1 +Shipping

Driver Station - 1/32 or 1/24

This is a simple driver station that is large enough to fit 1/32 cars, and most 1/24 cars. They are numbered and can be printed in lane colors. The numbers can be left empty/debossed, or printed in a contrasting color of your choice. The hole below the number can be removed or changed to any shape and size to suit whatever controller connector(s) you'd like to use there. The slot should be long enough for pretty much any car. These go great with the controller holders above.

Price - $15 ea. +Shipping

Customizable Controller Key Fob

Show your love of slot racing any time you take out your keys! Rep your club, or favorite brand, or have your initials on it. Choose your own colors for the body and text. These are two sided, so text can be different on each side. Keychain/ring not included.

Price - $5 ea. +Shipping

Race Team Themed Bottle Openers

With carefully planned color changes, these classic bottle openers, using a penny for the prying edge, look like your favorite racing team car liveries. Choose from any of the currently available liveries, or contact me to suggest one I haven't done yet. Price includes shipping within the USA, penny included!

Price - $5 ea.


Print your own!

AND MORE!!!

There is a very wide variety of models designed for slot car racing, from buildings to scenery to car bodies and chassis. Take a look at some of the things I've made for myself and other people. If you're looking for something in particular that you don't see on this page, just contact me. I might be able to find it, or design it. To the left you'll see A Dunlop bridge and lap tower, a Shell tower, pit lane garage facade, traffic cones, and more! Many of these come as simple model kits that you can easily assemble, or as ready to use completed prints. The PLA they are printed with can be painted, and they all pass the five foot rule. Some additional finishing work may be necessary if you plan to take close-up pictures, since the layer lines will be visible close up.

Price - $CONTACT ME